Date: Wed, 23 Feb 2000 17:56:39 +0800 (CST) From: User URANIA <urania@iss.com.tw> To: freebsd-current@freebsd.org Subject: Problem with IBM Netfinity 5000 Server (with dmesg) Message-ID: <Pine.BSF.4.20.0002231753180.28329-100000@iss.com.tw>
next in thread | raw e-mail | index | archive | help
Sorry for sending you all the messages from /var/log/messages, here is
dmesg as the NIC at 5th PCI slot,
Sorry for I cannot got dmesg as the NIC at 4th PCI slot, server reboot
and I lost every things ....
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Wed Feb 23 13:56:44 CST 2000
root@www.securenet.com.tw:/usr/src/sys/compile/www
Calibrating clock(s) ... TSC clock: 498602083 Hz, i8254 clock: 1193024 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 498670656 Hz
CPU: Pentium III/Pentium III Xeon (498.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 536854528 (524272K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x0031c000 - 0x1fff3fff, 533561344 bytes (130264 pages)
avail memory = 517894144 (505756K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fd5d0
bios32: Entry = 0xfd5e1 (c00fd5e1) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xd61c
pnpbios: Found PnP BIOS data at 0xc00fde90
pnpbios: Entry = f0000:497d Rev = 1.0
Other BIOS signatures found:
ACPI: 000fdec0
Preloaded elf kernel "kernel" at 0xc0303000.
Pentium Pro MTRR support enabled
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0007, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000000, size 0
found-> vendor=0x1166, dev=0x0005, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1229, revid=0x05
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base febff000, size 12
map[14]: type 1, range 32, base 00002000, size 5
map[18]: type 1, range 32, base fea00000, size 20
found-> vendor=0x9004, dev=0x7895, revid=0x04
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[10]: type 1, range 32, base 00002200, size 8
map[14]: type 1, range 32, base febfe000, size 12
found-> vendor=0x9004, dev=0x7895, revid=0x04
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[10]: type 1, range 32, base 00002300, size 8
map[14]: type 1, range 32, base febfd000, size 12
found-> vendor=0x1022, dev=0x2000, revid=0x36
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00002020, size 5
map[14]: type 1, range 32, base febfcc00, size 5
found-> vendor=0x5333, dev=0x8901, revid=0x16
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x1166, dev=0x0200, revid=0x4d
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0210, revid=0x4a
class=01-01-ea, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=14
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
map[18]: type 1, range 32, base 00000010, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 0000ffa0, size 4
found-> vendor=0x1166, dev=0x0220, revid=0x04
class=0c-03-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base ff700000, size 12
pci0: <PCI bus> on pcib0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0x2000-0x201f mem 0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 11 at device 1.0 on pci0
fxp0: Ethernet address 00:04:ac:45:75:fc
bpf: fxp0 attached
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x2200-0x22ff mem 0xfebfe000-0xfebfefff irq 15 at device 6.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: High byte termination Enabled
ahc0: aic7895 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Downloading Sequencer Program... 389 instructions downloaded
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0x2300-0x23ff mem 0xfebfd000-0xfebfdfff irq 10 at device 6.1 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination Enabled
ahc1: High byte termination Enabled
ahc1: aic7895 Wide Channel B, SCSI Id=7, 16/255 SCBs
ahc1: Downloading Sequencer Program... 389 instructions downloaded
lnc0: <PCNet/PCI Ethernet adapter> port 0x2020-0x203f mem 0xfebfcc00-0xfebfcc1f irq 11 at device 9.0 on pci0
lnc0: PCnet-FAST+ address 00:06:29:39:16:e0
bpf: lnc0 attached
using shared irq11.
lnc0: driver is using old-style compatability shims
pci0: <S3 Trio 64V2/DX/GX graphics accelerator> (vendor=0x5333, dev=0x8901) at 10.0 irq 9
isab0: <PCI to ISA bridge (vendor=1166 device=0200)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Unknown PCI ATA controller (generic mode)> port 0xffa0-0xffaf,0-0x3,0x10-0x17,0x3f4-0x3f7,0x1f0-0x1f7 irq 14 at device 15.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=00 status1=00
ata0: devices = 0x4
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
pci0: <OHCI USB controller> (vendor=0x1166, dev=0x0220) at 15.2 irq 10
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166)
pcib1: <RCC HE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
devclass_alloc_unit: lnc0 already exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: status 00 00 64
psm: data ffffffff 00 64
psm: status 00 02 64
psm: data ffffffff 02 64
psm0: failed to get data.
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:0223fe3f 0..547=548 cylinders, 0..254=255 heads, 1..63=63 sectors
3:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 16 packets/entry by default
bpf: lo0 attached
ata0-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-master: success setting up PIO4 mode on generic chip
acd0: MODE_SENSE_BIG command timeout - resetting
ata0: resetting devices .. ata0: mask=01 status0=00 status1=00
done
acd0: read data overrun 28/2
acd0: <CRD-8322B/1.07> CDROM drive at ata0 as master
acd0: read 500KB/s (10517KB/s), 1792KB buffer, PIO4
acd0: Reads: CD-RW
acd0: Mechanism: caddy
acd0: Medium: CD-ROM 120mm audio disc loaded
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ahc1: target 4 using 16bit transfers
ahc1: target 4 synchronous at 5.7MHz, offset = 0x8
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 5.7MHz, offset = 0x8
ahc1: target 1 using 16bit transfers
ahc1: target 1 synchronous at 5.7MHz, offset = 0x8
ahc0: target 5 using 16bit transfers
ahc0: target 5 synchronous at 5.0MHz, offset = 0x8
Creating DISK da3
Creating DISK da0
Creating DISK da1
Creating DISK da2
pass0 at ahc0 bus 0 target 5 lun 0
pass0: <Proware 5960SW > Fixed Direct Access SCSI-2 device
pass0: Serial Number \^_
pass0: 10.000MB/s transfers (5.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass1 at ahc1 bus 0 target 0 lun 0
pass1: <IBM-PSG DNES-309170Y !# SAB0> Fixed Direct Access SCSI-3 device
pass1: Serial Number AJ1EP186
pass1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
pass2 at ahc1 bus 0 target 1 lun 0
pass2: <IBM-PSG DNES-309170Y !# SAB0> Fixed Direct Access SCSI-3 device
pass2: Serial Number AJ1J7486
pass2: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
pass3 at ahc1 bus 0 target 4 lun 0
pass3: <IBM-PCCO DDRS-34560Y !# S97B> Fixed Direct Access SCSI-2 device
pass3: Serial Number RD4C8750
pass3: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
pass4 at ahc1 bus 0 target 14 lun 0
pass4: <SDR GEM200 2> Fixed Processor SCSI-2 device
pass4: Serial Number 1
pass4: 3.300MB/s transfers
pass4 at ahc1 bus 0 target 14 lun 0
pass4: <SDR GEM200 2> Fixed Processor SCSI-2 device
pass4: Serial Number 1
pass4: 3.300MB/s transfers
da3 at ahc0 bus 0 target 5 lun 0
da3: <Proware 5960SW > Fixed Direct Access SCSI-2 device
da3: Serial Number \^_
da3: 10.000MB/s transfers (5.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da3: 61208MB (125353984 512 byte sectors: 255H 63S/T 7802C)
Mounting root from ufs:/dev/da0s1a
da1 at ahc1 bus 0 target 1 lun 0
da1: <IBM-PSG DNES-309170Y !# SAB0> Fixed Direct Access SCSI-3 device
da1: Serial Number AJ1J7486
da1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
da0 at ahc1 bus 0 target 0 lun 0
da0: <IBM-PSG DNES-309170Y !# SAB0> Fixed Direct Access SCSI-3 device
da0: Serial Number AJ1EP186
da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
da0s1: type 0xa5, start 63, end = 401624, size 401562 : OK
da0s2: type 0xa5, start 401625, end = 2490074, size 2088450 : OK
da0s3: type 0xa5, start 2490075, end = 17767889, size 15277815 : OK
da2 at ahc1 bus 0 target 4 lun 0
da2: <IBM-PCCO DDRS-34560Y !# S97B> Fixed Direct Access SCSI-2 device
da2: Serial Number RD4C8750
da2: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 4303MB (8813870 512 byte sectors: 255H 63S/T 548C)
WARNING: / was not properly dismounted
start_init: trying /sbin/init
da3s1: type 0xa5, start 63, end = 125339129, size 125339067 : OK
da2s1: type 0xa5, start 63, end = 8803619, size 8803557 : OK
ahc0: target 5 using asynchronous transfers
ahc0: target 5 synchronous at 5.0MHz, offset = 0x8
da3s1: type 0xa5, start 63, end = 125339129, size 125339067 : OK
ahc0: target 5 using asynchronous transfers
ahc0: target 5 synchronous at 5.0MHz, offset = 0x8
da3s1: type 0xa5, start 63, end = 125339129, size 125339067 : OK
ahc0: target 5 using asynchronous transfers
ahc0: target 5 synchronous at 5.0MHz, offset = 0x8
da3s1: type 0xa5, start 63, end = 125339129, size 125339067 : OK
ahc0: target 5 using asynchronous transfers
ahc0: target 5 synchronous at 5.0MHz, offset = 0x8
da3s1: type 0xa5, start 63, end = 125339129, size 125339067 : OK
ahc0: target 5 using asynchronous transfers
ahc0: target 5 synchronous at 5.0MHz, offset = 0x8
da3s1: type 0xa5, start 63, end = 125339129, size 125339067 : OK
da2s1: type 0xa5, start 63, end = 8803619, size 8803557 : OK
lnc0: Device timeout -- Resetting
Linux-ELF exec handler installed
splash: image decoder found: blank_saver
pid 254 (snpserv), uid 0: exited on signal 11 (core dumped)
(da0:ahc1:0:0:0): tagged openings now 64
Here comes my kernel config file
machine i386
cpu I686_CPU
options NO_F00F_HACK
ident www
maxusers 32
options NMBCLUSTERS=2048
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options NFS #Network Filesystem
#options MSDOSFS #MSDOS Filesystem
options QUOTA #enable disk quotas
#options NSWAPDEV=20 # Allow this many swap-devices.
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=1000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
#options USERCONFIG #boot -c editor
#options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) syscall trace support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device isa0
#device pnp0 # PnP support for ISA
device pci0
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd0 # ATAPI floppy drives
#device atapist0 # ATAPI tape drives
#options ATA_ENABLE_ATAPI_DMA
#controller wdc0 at isa? port IO_WD1 irq 14
#device wd0 at wdc0 drive 0
#device wd1 at wdc0 drive 1
#controller wdc1 at isa? port IO_WD2 irq 15
#device wd2 at wdc1 drive 0
#device wd3 at wdc1 drive 1
# SCSI Controllers
#device ahc
device ahc0 # AHA2940 and onboard AIC7xxx devices
device ahc1 # Netfinity 5000 support two channels
# SCSI peripherals
# because Netfinity 5000 ahc0 attaches to external usage, and ahc1 attaches
# to internal usage, we cannot change it .... ><#
device scbus0 at ahc0 bus0
device scbus1 at ahc1 bus0
device da0 at scbus1 target 0 unit 0
device da1 at scbus1 target 1 unit 0
device da2 at scbus1 target 4 unit 0
# Next device entry is for external RAID usage, you must modify it to
# match realy world configure.
device da3 at scbus0 target 5 unit 0
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
#device apm0 at nexus? disable flags 0x31 # Advanced Power Management
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
# Parallel port
device ppc0 at isa? port? flags 0x40 irq 7
device ppbus0 # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#controller vpo0 # Requires scbus and da0
# PCI Ethernet NICs.
device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
# ISA Ethernet NICs.
device lnc0 at isa? port 0x280 irq 10 drq 0
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device gzip # Exec gzipped a.out's
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
#controller uhci0 # UHCI PCI->USB interface
#controller ohci0 # OHCI PCI->USB interface
#controller usb0 # USB Bus (required)
#device ugen0 # Generic
#device uhid0 # "Human Interface Devices"
#device ukbd0 # Keyboard
#device ulpt0 # Printer
#controller umass0 # Disks/Mass storage - Requires scbus and da0
#device ums0 # Mouse
options SOFTUPDATES
options MD5
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
#pseudo-device vinum #Vinum concat/mirror/raid driver
options SC_DISABLE_REBOOT # disable reboot key sequence
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=16
# end of WWW Server config file
I also set these flags at my /etc/make.conf
#
CFLAGS= -mpentiumpro -O6 -pipe -funroll-loops -fexpensive-optimizations
#
# To avoid building various parts of the base system:
NO_SENDMAIL= true
#NO_CVS= true
#
# To compile just the kernel with special optimisations, you should use
# this instead of CFLAGS (which is not applicable to kernel builds anyway):
#
COPTFLAGS= -mpentiumpro -O6 -pipe -funroll-loops
#
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.20.0002231753180.28329-100000>