Date: Sat, 27 Oct 2007 19:33:53 +0200 From: "Michael van Tellingen" <michaelvantellingen@gmail.com> To: freebsd-stable@freebsd.org Subject: g_vfs_done() errors with Areca ARC-1110 raid controller Message-ID: <f1e83f4f0710271033s1c3c29a7xa4e5624957752114@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hello, I just upgraded my system to 7.0-BETA1 and experiencing problems with my areca raid controller (i can't access the disk). /var/log/messages is reporting: kernel: g_vfs_done():da0s1e[READ(offset=114688, length=16384)]error = 16 kernel: g_vfs_done():da0s1e[READ(offset=114688, length=16384)]error = 16 Searching for this error message on google I found the following faq entry in the areca knowledgebase: http://faq.areca.com.tw/modules/smartfaq/faq.php?faqid=282 I'm wondering if the source change mentioned is included in cvs, or if this is perhaps another error. uname -a output: FreeBSD fasdu.tellingen.tl 7.0-BETA1 FreeBSD 7.0-BETA1 #0: Thu Oct 25 19:36:05 CEST 2007 mvtellingen@fasdu.tellingen.tl:/new_disk/usr/obj/usr/src/sys/GENERIC i386 I've included /var/run/dmesg.boot as attachment. Please let me know if there is more information required. Regards, Michael van Tellingen [-- Attachment #2 --] Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA1 #0: Thu Oct 25 19:36:05 CEST 2007 mvtellingen@fasdu.tellingen.tl:/new_disk/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.53GHz (2527.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,xTPR> real memory = 536805376 (511 MB) avail memory = 511381504 (487 MB) ACPI APIC Table: <A M I OEMAPIC > ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <A M I OEMRSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 1ff00000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0xbc00-0xbc1f mem 0xfc8e0000-0xfc8fffff,0xfc8c0000-0xfc8dffff irq 18 at device 1.0 on pci1 em0: Ethernet address: 00:13:d4:b6:d7:d4 em0: [FILTER] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 3.0 on pci2 pci3: <PCI bus> on pcib3 arcmsr0: <Areca SATA Host Adapter RAID Controller > mem 0xfc9ff000-0xfc9fffff,0xf7800000-0xf7bfffff irq 27 at device 14.0 on pci3 ARECA RAID ADAPTER0: Driver Version 1.20.00.14 2007-2-05 ARECA RAID ADAPTER0: FIRMWARE VERSION V1.41 2006-5-24 arcmsr0: [ITHREAD] uhci0: <UHCI (generic) USB controller> port 0xe800-0xe81f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xec00-0xec1f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered pci0: <base peripheral> at device 29.4 (no driver attached) ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xfebfbc00-0xfebfbfff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: waiting for BIOS to give up control usb2: timed out waiting for BIOS usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 6300ESB USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 vgapci0: <VGA-compatible display> port 0xc800-0xc8ff mem 0xfd000000-0xfdffffff,0xfeaff000-0xfeafffff at device 3.0 on pci4 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xfeafec00-0xfeafec7f irq 20 at device 4.0 on pci4 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:04:75:bf:2a:90 xl0: [ITHREAD] xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xc400-0xc47f mem 0xfeafe800-0xfeafe87f irq 21 at device 5.0 on pci4 miibus1: <MII bus> on xl1 xlphy0: <3c905C 10/100 internal PHY> PHY 24 on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:04:76:17:83:97 xl1: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 6300ESB UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <Intel 6300ESB SATA150 controller> port 0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd40f irq 18 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc97ff,0xc9800-0xc9fff pnpid ORM0000 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2527016463 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle ad0: DMA limited to UDMA33, controller found non-ATA66 cable ad0: 39083MB <Maxtor 5T040H4 TAH71DP0> at ata0-master UDMA33 ad4: 152627MB <Seagate ST3160827AS 3.42> at ata2-master SATA150 da0 at arcmsr0 bus 0 target 0 lun 0 da0: <Areca ARC-1110-VOL#00 R001> Fixed Direct Access SCSI-3 device da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit) da0: 953879MB (1953545216 512 byte sectors: 255H 63S/T 121602C) Trying to mount root from ufs:/dev/ad4s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f1e83f4f0710271033s1c3c29a7xa4e5624957752114>