From owner-freebsd-mobile Sun Oct 22 18:32:20 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from freesbee.wheel.dk (freesbee.wheel.dk [193.162.159.97]) by hub.freebsd.org (Postfix) with ESMTP id 67D9637B479 for ; Sun, 22 Oct 2000 18:32:17 -0700 (PDT) Received: by freesbee.wheel.dk (Postfix, from userid 1002) id 3D2D33E56; Mon, 23 Oct 2000 03:32:13 +0200 (CEST) Date: Mon, 23 Oct 2000 03:32:13 +0200 From: "Niels Chr. Bank-Pedersen" To: freebsd-mobile@freebsd.org Subject: 3C574-TX "failed to come ready or product ID unknown" Message-ID: <20001023033213.X25768@bank-pedersen.dk> Mail-Followup-To: "Niels Chr. Bank-Pedersen" , freebsd-mobile@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Is anybody using the 3COM 3C574-TX 16 bit card with current (still the old pcic/card code)? I'm having some trouble making it work: Oct 23 03:03:19 ip713 pccardd[595]: Card "3Com"("3C574-TX Fast EtherLink PC Card") [A] [001] matched "3Com" ("3C574-TX Fast EtherLink PC Card") [A] [001] Oct 23 03:03:24 ip713 /boot/kernel/kernel: ep0: Unit failed to come ready or product ID unknown! (id 0x0) Oct 23 03:03:24 ip713 pccardd[595]: driver allocation failed for 3Com(3C574-TX Fast EtherLink PC Card): Device not configured The dumpcis (below) seems ok, but for some reason the driver can't match the ID and attach to the card. I have tried increasing the reset value, but that doesn't make any difference. I have no problem with my 589D, but I'd rather have the 574 working :-) TIA /Niels Chr. # pccardc dumpcis Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 43 02 ff Attribute memory device information: Device number 1, type EEPROM, WPS = OFF Speed = 150nS, Memory block size = 8Kb, 1 units Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 74 05 PCMCIA ID = 0x101, OEM ID = 0x574 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x15 (Version 1 info), length = 46 000: 04 01 33 43 6f 6d 00 33 43 35 37 34 2d 54 58 20 010: 46 61 73 74 20 45 74 68 65 72 4c 69 6e 6b 20 50 020: 43 20 43 61 72 64 00 41 00 30 30 31 00 ff Version = 4.1, Manuf = [3Com], card vers = [3C574-TX Fast EtherLink PC Card] Addit. info = [A],[001] Tuple #6, code = 0x1a (Configuration map), length = 6 000: 02 03 00 00 01 03 Reg len = 3, config register addr = 0x10000, last config = 0x3 Registers: XX------ Tuple #7, code = 0x1b (Configuration entry), length = 15 000: c1 01 1d 71 55 35 55 54 e0 72 5d 65 30 ff ff Config index = 0x1(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 3 x 10mA Max current average over 10 ms: 5 x 10mA Power down supply current: 5 x 1mA Wait scale Speed = 7.0 x 100 ns RDY/BSY scale Speed = 5.0 x 100 us Card decodes 5 address lines, full 8/16 Bit I/O IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #8, code = 0x19 (JEDEC descr for attribute memory), length = 3 000: 00 00 ff Tuple #9, code = 0x14 (No link), length = 0 Tuple #10, code = 0x10 (Checksum), length = 5 000: 9d ff 6c 00 00 Checksum from offset 65437, length 108, value is 0x0 Tuple #11, code = 0xff (Terminator), length = 0 -- Niels Christian Bank-Pedersen, NCB1-RIPE. Network Manager, Tele Danmark NET, IP-section. "Hey, are any of you guys out there actually *using* RFC 2549?" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message