Date: Sun, 16 Feb 2003 12:12:13 +0100 From: Vaclav Kares <vaclav.kares@tiscali.cz> To: "M. Warner Losh" <imp@bsdimp.com> Cc: freebsd-mobile@freebsd.org Subject: Re: cbb: Unable to map IRQ... Message-ID: <20030216111213.GA1057@Kares.server> In-Reply-To: <20030215.194620.42058237.imp@bsdimp.com> References: <20030215095646.GA955@Kares.server> <20030215.194620.42058237.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> If PCIBIOS won't route interrupts (which is what the unable to map IRQ
> messages mean when running w/o acpi), then you are SOL (out of luck).
I forgot to note that the card works without acpi on Linux. I am not
sure if this can prove the possibility to route interrupts with PCIBIOS but
I think that yes. Moreover there is the line in verbose boot
pci_cfgintr_virgin: using routable PCI-only interrupt 11
> boot verbose might give more insight into the failure mode, and it
The verbose boot for GENERIC without acpi is:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Thu Jan 16 22:16:53 GMT 2003
root@hollin.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0628000.
Calibrating clock(s) ... TSC clock: 232087518 Hz, i8254 clock: 1193090 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 232106532 Hz
CPU: Pentium/P55C (quarter-micron) (232.11-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 100466688 (95 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0064f000 - 0x05fc7fff, 93818880 bytes (22905 pages)
avail memory = 90959872 (86 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry = f0000:e724 Rev = 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000050
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086)
Using $PIR table, 4 entries at 0xc00f9e10
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7100, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=1, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=1, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00008400, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=1, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=1, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 20301000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 20300000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 24, enabled
map[14]: type 1, range 32, base 20000000, size 21, enabled
map[18]: type 1, range 32, base 20200000, size 20, enabled
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 1.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
ata1: mask=01 ostat0=51 ostat2=fd
ata1-master: ATAPI 14 eb
ata1: mask=01 stat0=10 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f irq 11 at device 1.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, clAss 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 1.3 (no driver attached)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr_virgin: using routable PCI-only interrupt 11
pci_cfgintr: ROUTE_INTERRUPT failed.
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0
cardbus1: <CardBus bus> on cbb0
pccard1: <16-bit PCCard bus> on cbb0
pci_cfgintr_virgin: using routable PCI-only interrupt 11
pci_cfgintr: ROUTE_INTERRUPT failed.
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
pci0: <display, VGA> at device 3.0 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 23 devices, largest 980 bytes
PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x8f, size=0x10, align=0x1
PNP0200: adding fixed io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x73, size=0x4, align=0x1
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
IBM3780: adding irq mask 0x1000
pnpbios: handle 6 device ID IBM3780 (80374d24)
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x80
PNP0700: adding dma mask 0x4
pnpbios: handle 8 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x22-0x22, size=0x1, align=0
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0
PNP0c02: adding io range 0xef00-0xefaf, size=0xb0, align=0
PNP0c02: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c02: adding fixed memory32 range 0x100000-0x5ffffff, size=0x5f00000
PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
pnpbios: handle 11 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3e8-0x3ef, size=0x8, align=0
pnpbios: handle 13 device ID PNP0501 (0105d041)
CSC0000: adding io range 0x530-0x537, size=0x8, align=0
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0
CSC0000: adding io range 0x220-0x233, size=0x14, align=0x20
CSC0000: adding irq mask 0x20
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x1
pnpbios: handle 14 device ID CSC0000 (0000630e)
CSC0010: adding io range 0x538-0x53f, size=0x8, align=0
pnpbios: handle 15 device ID CSC0010 (1000630e)
pnpbios: handle 16 device ID CSC0001 (0100630e)
pnpbios: handle 17 device ID CSC0003 (0300630e)
IBM3760: adding io range 0x130-0x13f, size=0x10, align=0
IBM3760: adding io range 0x2f8-0x2ff, size=0x8, align=0
IBM3760: adding irq mask 0x8
IBM3760: adding irq mask 0x400
IBM3760: adding dma mask 0x80
pnpbios: handle 18 device ID IBM3760 (60374d24)
pnpbios: handle 19 device ID IBM0071 (71004d24)
PNP0e03: adding io range 0-0x1, size=0x2, align=0
pnpbios: handle 20 device ID PNP0e03 (030ed041)
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0
PNP0680: adding io range 0x3f6-0x3f7, size=0x2, align=0
PNP0680: adding io range 0xfcf0-0xfcf7, size=0x8, align=0
pnpbios: handle 23 device ID PNP0680 (8006d041)
PNP0680: adding irq mask 0x8000
PNP0680: adding io range 0x170-0x177, size=0x8, align=0
PNP0680: adding io range 0x376-0x376, size=0x1, align=0
PNP0680: adding io range 0xfcf8-0xfcff, size=0x8, align=0
pnpbios: handle 25 device ID PNP0680 (8006d041)
PNP0c02: adding fixed memory32 range 0xca000-0xcbfff, size=0x2000
pnpbios: handle 27 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3e8-0x3ef irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <IBM3780> can't assign resources (irq)
unknown: <IBM3780> at irq 12 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x22 iomem 0xffff0000-0xffffffff,0x100000-0x5ffffff,0xf0000-0xfffff,0-0x9ffff on isa0
ppc1: parallel port not found.
unknown: <Standard parallel printer port> failed to probe on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3e8-0x3ef on isa0
adv1: Invalid baseport of 0x530 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <CSC0000> failed to probe at port 0x220-0x233,0x388-0x38b,0x530-0x53f irq 5 drq 0,1 on isa0
unknown: <CSC0010> can't assign resources (port)
unknown: <CSC0010> at port 0x538-0x53f on isa0
unknown: <CSC0001> failed to probe on isa0
unknown: <CSC0003> failed to probe on isa0
unknown: <IBM3760> failed to probe at port 0x2f8-0x2ff,0x130-0x13f irq 10,3 drq 7 on isa0
unknown: <IBM0071> failed to probe on isa0
unknown: <PNP0e03> can't assign resources (port)
unknown: <PNP0e03> at port 0-0x1 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x170-0x177 on isa0
BIOS Geometries:
0:03127f3f 0..786=787 cylinders, 0..127=128 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
ad0: success setting UDMA2 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IBM-DYKA-23240/YK4IA74G> ATA-3 disk at ata0-master
ad0: 3102MB (6354432 sectors), 6304 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD-ROM XM-1702BC/1562> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s1, start 32256 length 1568899584 end 1568931839
GEOM: Configure ad0s2, start 1568931840 length 1321205760 end 2890137599
GEOM: Configure ad0s3, start 2890137600 length 66060288 end 2956197887
GEOM: Configure ad0s4, start 2956197888 length 297271296 end 3253469183
GEOM: Add ad0s1 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s1a, start 0 length 125829120 end 125829119
GEOM: Configure ad0s1b, start 125829120 length 67108864 end 192937983
GEOM: Configure ad0s1c, start 0 length 1568899584 end 1568899583
GEOM: Configure ad0s1d, start 192937984 length 1375961600 end 1568899583
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
and a part with acpi:
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
...
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
pcib0: slot 2 INTA is routed to irq 11
> might be possible that FreeBSD is calling the PCIBIOS wrong or
> something, but I thought the last such bug was fixed a while ago.
Thanks,
Vaclav
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030216111213.GA1057>