Date: Tue, 12 Jun 2001 10:38:58 +0200 From: Borja Marcos <borjam@sarenet.es> To: freebsd-scsi@freebsd.org Subject: Dell PERC 3/Di -> Unsuccessful Message-ID: <01061210385807.17016@borja.sarenet.es>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hello, I am trying to get a Dell PERC 3/Di to work, without success. The machine is a Dell PowerEdge 2550 with the RAID in the motherboard. The "aac" driver in the kernel does not detect it. I have tried in two configurations; the default mode, with one of the channels used as "RAID" and the other as a standard SCSI bus, and with both channels enables as "RAID". Neither of them works. I include the "boot -v" /var/log/messages. This seems strange: Jun 12 09:39:40 ozu4 /kernel: pci2: <unknown card> (vendor=0x1028, dev=0x0002) at 2.1 irq 5 One of the identifiers for the PERC 3/Di in aac_pci.c is vendor=0x1028, dev=0x0002. However, it seems that it is not identifying it. Any ideas? Borja. [-- Attachment #2 --] Jun 12 09:39:39 ozu4 /kernel: Copyright (c) 1992-2001 The FreeBSD Project. Jun 12 09:39:39 ozu4 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Jun 12 09:39:39 ozu4 /kernel: The Regents of the University of California. All rights reserved. Jun 12 09:39:39 ozu4 /kernel: FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 Jun 12 09:39:39 ozu4 /kernel: jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC Jun 12 09:39:39 ozu4 /kernel: Timecounter "i8254" frequency 1193182 Hz Jun 12 09:39:39 ozu4 /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (927.11-MHz 686-class CPU) Jun 12 09:39:39 ozu4 /kernel: Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Jun 12 09:39:39 ozu4 /kernel: Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Jun 12 09:39:39 ozu4 /kernel: real memory = 2147418112 (2097088K bytes) Jun 12 09:39:39 ozu4 /kernel: avail memory = 2087641088 (2038712K bytes) Jun 12 09:39:39 ozu4 /kernel: Preloaded elf kernel "kernel" at 0xc044d000. Jun 12 09:39:39 ozu4 /kernel: Pentium Pro MTRR support enabled Jun 12 09:39:39 ozu4 /kernel: md0: Malloc disk Jun 12 09:39:39 ozu4 /kernel: npx0: <math processor> on motherboard Jun 12 09:39:39 ozu4 /kernel: npx0: INT 16 interface Jun 12 09:39:39 ozu4 /kernel: pcib0: <ServerWorks host to PCI bridge> on motherboard Jun 12 09:39:39 ozu4 /kernel: pci0: <PCI bus> on pcib0 Jun 12 09:39:39 ozu4 /kernel: pci0: <ATI Mach64-GR graphics accelerator> at 14.0 Jun 12 09:39:39 ozu4 /kernel: isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 Jun 12 09:39:39 ozu4 /kernel: isa0: <ISA bus> on isab0 Jun 12 09:39:39 ozu4 /kernel: atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0 Jun 12 09:39:39 ozu4 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Jun 12 09:39:39 ozu4 /kernel: pcib2: <ServerWorks host to PCI bridge> on motherboard Jun 12 09:39:39 ozu4 /kernel: pci2: <PCI bus> on pcib2 Jun 12 09:39:39 ozu4 /kernel: pcib4: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci2 Jun 12 09:39:40 ozu4 /kernel: pci3: <PCI bus> on pcib4 Jun 12 09:39:40 ozu4 /kernel: pci3: <unknown card> (vendor=0x9005, dev=0x00c5) at 4.0 irq 5 Jun 12 09:39:40 ozu4 /kernel: ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfe7fe000-0xfe7fefff irq 11 at device 4.1 on pci3 Jun 12 09:39:40 ozu4 /kernel: aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs Jun 12 09:39:40 ozu4 /kernel: pci2: <unknown card> (vendor=0x1028, dev=0x0002) at 2.1 irq 5 Jun 12 09:39:40 ozu4 /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xbcc0-0xbcff mem 0xfe500000-0xfe5fffff,0xfe900000-0xfe900fff irq 10 at device 4.0 on pci2 Jun 12 09:39:40 ozu4 /kernel: fxp0: Ethernet address 00:b0:d0:f0:76:de Jun 12 09:39:40 ozu4 /kernel: pcib1: <ServerWorks host to PCI bridge> on motherboard Jun 12 09:39:40 ozu4 /kernel: pci1: <PCI bus> on pcib1 Jun 12 09:39:40 ozu4 /kernel: pci1: <unknown card> (vendor=0x14e4, dev=0x1644) at 8.0 irq 11 Jun 12 09:39:40 ozu4 /kernel: pcib3: <ServerWorks host to PCI bridge> on motherboard Jun 12 09:39:40 ozu4 /kernel: pci4: <PCI bus> on pcib3 Jun 12 09:39:40 ozu4 /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Jun 12 09:39:40 ozu4 /kernel: fdc0: FIFO enabled, 8 bytes threshold Jun 12 09:39:40 ozu4 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Jun 12 09:39:40 ozu4 /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Jun 12 09:39:40 ozu4 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Jun 12 09:39:40 ozu4 /kernel: kbd0 at atkbd0 Jun 12 09:39:40 ozu4 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jun 12 09:39:40 ozu4 /kernel: sc0: <System console> at flags 0x100 on isa0 Jun 12 09:39:40 ozu4 /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jun 12 09:39:40 ozu4 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Jun 12 09:39:40 ozu4 /kernel: sio0: type 16550A Jun 12 09:39:40 ozu4 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Jun 12 09:39:40 ozu4 /kernel: sio1: type 16550A Jun 12 09:39:40 ozu4 /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Jun 12 09:39:40 ozu4 /kernel: ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode Jun 12 09:39:40 ozu4 /kernel: ppc0: FIFO with 16/16/8 bytes threshold Jun 12 09:39:40 ozu4 /kernel: plip0: <PLIP network interface> on ppbus0 Jun 12 09:39:40 ozu4 /kernel: lpt0: <Printer> on ppbus0 Jun 12 09:39:40 ozu4 /kernel: lpt0: Interrupt-driven port Jun 12 09:39:40 ozu4 /kernel: ppi0: <Parallel I/O> on ppbus0 Jun 12 09:39:40 ozu4 /kernel: acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata0-master using PIO4 Jun 12 09:39:40 ozu4 /kernel: Waiting 15 seconds for SCSI devices to settle Jun 12 09:39:40 ozu4 /kernel: pass2 at ahc0 bus 0 target 6 lun 0 Jun 12 09:39:40 ozu4 /kernel: pass2: < 1x4 U2W SCSI BP 1.24> Fixed Processor SCSI-2 device Jun 12 09:39:40 ozu4 /kernel: pass2: 3.300MB/s transfers Jun 12 09:39:40 ozu4 /kernel: da0 at ahc0 bus 0 target 0 lun 0 Jun 12 09:39:40 ozu4 /kernel: da0: <QUANTUM ATLAS10K2-TY092J DA40> Fixed Direct Access SCSI-3 device Jun 12 09:39:40 ozu4 /kernel: da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled Jun 12 09:39:40 ozu4 /kernel: da0: 8683MB (17783239 512 byte sectors: 255H 63S/T 1106C) Jun 12 09:39:40 ozu4 /kernel: da1 at ahc0 bus 0 target 1 lun 0 Jun 12 09:39:40 ozu4 /kernel: da1: <QUANTUM ATLAS10K2-TY092J DA40> Fixed Direct Access SCSI-3 device Jun 12 09:39:40 ozu4 /kernel: da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled Jun 12 09:39:40 ozu4 /kernel: da1: 8683MB (17783239 512 byte sectors: 255H 63S/T 1106C) Jun 12 09:39:40 ozu4 /kernel: Mounting root from ufs:/dev/da0s1a Jun 12 09:39:49 ozu4 login: ROOT LOGIN (root) ON ttyv0 Jun 12 09:43:21 ozu4 login: ROOT LOGIN (root) ON ttyv0 Jun 12 09:43:23 ozu4 shutdown: reboot by root: Jun 12 09:43:25 ozu4 syslogd: exiting on signal 15 Jun 12 09:45:14 ozu4 /kernel: Copyright (c) 1992-2001 The FreeBSD Project. Jun 12 09:45:14 ozu4 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Jun 12 09:45:14 ozu4 /kernel: The Regents of the University of California. All rights reserved. Jun 12 09:45:14 ozu4 /kernel: FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 Jun 12 09:45:14 ozu4 /kernel: jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC Jun 12 09:45:14 ozu4 /kernel: Calibrating clock(s) ... TSC clock: 927096703 Hz, i8254 clock: 1193174 Hz Jun 12 09:45:14 ozu4 /kernel: CLK_USE_I8254_CALIBRATION not specified - using default frequency Jun 12 09:45:14 ozu4 /kernel: Timecounter "i8254" frequency 1193182 Hz Jun 12 09:45:14 ozu4 /kernel: CLK_USE_TSC_CALIBRATION not specified - using old calibration method Jun 12 09:45:14 ozu4 /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (927.11-MHz 686-class CPU) Jun 12 09:45:14 ozu4 /kernel: Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Jun 12 09:45:14 ozu4 /kernel: Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Jun 12 09:45:14 ozu4 /kernel: real memory = 2147418112 (2097088K bytes) Jun 12 09:45:14 ozu4 /kernel: Physical memory chunk(s): Jun 12 09:45:14 ozu4 /kernel: 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) Jun 12 09:45:14 ozu4 /kernel: 0x00473000 - 0x7ffe7fff, 2142720000 bytes (523125 pages) Jun 12 09:45:14 ozu4 /kernel: avail memory = 2087641088 (2038712K bytes) Jun 12 09:45:14 ozu4 /kernel: bios32: Found BIOS32 Service Directory header at 0xc00ffe80 Jun 12 09:45:14 ozu4 /kernel: bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 Jun 12 09:45:14 ozu4 /kernel: pcibios: PCI BIOS entry at 0xc73e Jun 12 09:45:14 ozu4 /kernel: pnpbios: Found PnP BIOS data at 0xc00fe2d0 Jun 12 09:45:14 ozu4 /kernel: pnpbios: Entry = f0000:e2f4 Rev = 1.0 Jun 12 09:45:14 ozu4 /kernel: Other BIOS signatures found: Jun 12 09:45:14 ozu4 /kernel: ACPI: 000fdc80 Jun 12 09:45:14 ozu4 /kernel: Preloaded elf kernel "kernel" at 0xc044d000. Jun 12 09:45:14 ozu4 /kernel: Pentium Pro MTRR support enabled Jun 12 09:45:14 ozu4 /kernel: md0: Malloc disk Jun 12 09:45:14 ozu4 /kernel: Creating DISK md0 Jun 12 09:45:14 ozu4 /kernel: Math emulator present Jun 12 09:45:14 ozu4 /kernel: pci_open(1): mode 1 addr port (0x0cf8) is 0x80000270 Jun 12 09:45:14 ozu4 /kernel: pci_open(1a): mode1res=0x80000000 (0x80000000) Jun 12 09:45:14 ozu4 /kernel: pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) Jun 12 09:45:14 ozu4 /kernel: pcib-: pcib0 exists, using next available unit number Jun 12 09:45:14 ozu4 /kernel: pcib-: pcib1 exists, using next available unit number Jun 12 09:45:14 ozu4 /kernel: npx0: <math processor> on motherboard Jun 12 09:45:14 ozu4 /kernel: npx0: INT 16 interface Jun 12 09:45:15 ozu4 /kernel: pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 Jun 12 09:45:15 ozu4 /kernel: pci_open(1a): mode1res=0x80000000 (0x80000000) Jun 12 09:45:15 ozu4 /kernel: pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) Jun 12 09:45:15 ozu4 /kernel: pcib0: <ServerWorks host to PCI bridge> on motherboard Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x1166, dev=0x0008, revid=0x23 Jun 12 09:45:15 ozu4 /kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x1166, dev=0x0008, revid=0x01 Jun 12 09:45:15 ozu4 /kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x1166, dev=0x0006, revid=0x01 Jun 12 09:45:15 ozu4 /kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x1166, dev=0x0006, revid=0x01 Jun 12 09:45:15 ozu4 /kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x1002, dev=0x4752, revid=0x27 Jun 12 09:45:15 ozu4 /kernel: class=03-00-00, hdrtype=0x00, mfdev=0 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: map[10]: type 1, range 32, base fd000000, size 24 Jun 12 09:45:15 ozu4 /kernel: map[14]: type 1, range 32, base 0000ec00, size 8 Jun 12 09:45:15 ozu4 /kernel: map[18]: type 1, range 32, base fe100000, size 12 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x1166, dev=0x0200, revid=0x50 Jun 12 09:45:15 ozu4 /kernel: class=06-01-00, hdrtype=0x00, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x1166, dev=0x0211, revid=0x00 Jun 12 09:45:15 ozu4 /kernel: class=01-01-8a, hdrtype=0x00, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: map[20]: type 1, range 32, base 000008b0, size 4 Jun 12 09:45:15 ozu4 /kernel: pci0: <PCI bus> on pcib0 Jun 12 09:45:15 ozu4 /kernel: pci0: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 14.0 Jun 12 09:45:15 ozu4 /kernel: isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 Jun 12 09:45:15 ozu4 /kernel: isa0: <ISA bus> on isab0 Jun 12 09:45:15 ozu4 /kernel: atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0 Jun 12 09:45:15 ozu4 /kernel: ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x08b0 Jun 12 09:45:15 ozu4 /kernel: ata0: mask=03 status0=50 status1=00 Jun 12 09:45:15 ozu4 /kernel: ata0: mask=03 ostat0=50 ostat2=00 Jun 12 09:45:15 ozu4 /kernel: ata0-master: ATAPI probe a=14 b=eb Jun 12 09:45:15 ozu4 /kernel: ata0-slave: ATAPI probe a=00 b=df Jun 12 09:45:15 ozu4 /kernel: ata0: mask=03 status0=00 status1=00 Jun 12 09:45:15 ozu4 /kernel: ata0: devices=04 Jun 12 09:45:15 ozu4 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Jun 12 09:45:15 ozu4 /kernel: ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x08b8 Jun 12 09:45:15 ozu4 /kernel: ata1: mask=00 status0=ff status1=ff Jun 12 09:45:15 ozu4 /kernel: ata1: probe allocation failed Jun 12 09:45:15 ozu4 /kernel: pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 Jun 12 09:45:15 ozu4 /kernel: pci_open(1a): mode1res=0x80000000 (0x80000000) Jun 12 09:45:15 ozu4 /kernel: pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) Jun 12 09:45:15 ozu4 /kernel: pcib2: <ServerWorks host to PCI bridge> on motherboard Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x8086, dev=0x0962, revid=0x01 Jun 12 09:45:15 ozu4 /kernel: class=06-04-00, hdrtype=0x01, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=3 secondarybus=3 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x1028, dev=0x0002, revid=0x01 Jun 12 09:45:15 ozu4 /kernel: class=01-04-00, hdrtype=0x00, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: intpin=a, irq=5 Jun 12 09:45:15 ozu4 /kernel: map[10]: type 1, range 32, base f0000000, size 27 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x8086, dev=0x1229, revid=0x08 Jun 12 09:45:15 ozu4 /kernel: class=02-00-00, hdrtype=0x00, mfdev=0 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: intpin=a, irq=10 Jun 12 09:45:15 ozu4 /kernel: map[10]: type 1, range 32, base fe900000, size 12 Jun 12 09:45:15 ozu4 /kernel: map[14]: type 1, range 32, base 0000bcc0, size 6 Jun 12 09:45:15 ozu4 /kernel: map[18]: type 1, range 32, base fe500000, size 20 Jun 12 09:45:15 ozu4 /kernel: pci2: <PCI bus> on pcib2 Jun 12 09:45:15 ozu4 /kernel: pcib4: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci2 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x9005, dev=0x00c5, revid=0x01 Jun 12 09:45:15 ozu4 /kernel: class=01-00-00, hdrtype=0x00, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: intpin=a, irq=5 Jun 12 09:45:15 ozu4 /kernel: map[10]: type 1, range 32, base 0000cc00, size 8 Jun 12 09:45:15 ozu4 /kernel: map[14]: type 1, range 64, base fe7ff000, size 12 Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x9005, dev=0x00cf, revid=0x01 Jun 12 09:45:15 ozu4 /kernel: class=01-00-00, hdrtype=0x00, mfdev=1 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: intpin=b, irq=11 Jun 12 09:45:15 ozu4 /kernel: map[10]: type 1, range 32, base 0000c800, size 8 Jun 12 09:45:15 ozu4 /kernel: map[14]: type 1, range 64, base fe7fe000, size 12 Jun 12 09:45:15 ozu4 /kernel: pci3: <PCI bus> on pcib4 Jun 12 09:45:15 ozu4 /kernel: pci3: <unknown card> (vendor=0x9005, dev=0x00c5) at 4.0 irq 5 Jun 12 09:45:15 ozu4 /kernel: ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfe7fe000-0xfe7fefff irq 11 at device 4.1 on pci3 Jun 12 09:45:15 ozu4 /kernel: ahc0: Reading SEEPROM...done. Jun 12 09:45:15 ozu4 /kernel: ahc0: Manual LVD Termination Jun 12 09:45:15 ozu4 /kernel: ahc0: BIOS eeprom is present Jun 12 09:45:15 ozu4 /kernel: ahc0: Secondary High byte termination Enabled Jun 12 09:45:15 ozu4 /kernel: ahc0: Secondary Low byte termination Enabled Jun 12 09:45:15 ozu4 /kernel: ahc0: Primary Low Byte termination Enabled Jun 12 09:45:15 ozu4 /kernel: ahc0: Primary High Byte termination Enabled Jun 12 09:45:15 ozu4 /kernel: ahc0: Downloading Sequencer Program... 424 instructions downloaded Jun 12 09:45:15 ozu4 /kernel: aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs Jun 12 09:45:15 ozu4 /kernel: pci2: <unknown card> (vendor=0x1028, dev=0x0002) at 2.1 irq 5 Jun 12 09:45:15 ozu4 /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xbcc0-0xbcff mem 0xfe500000-0xfe5fffff,0xfe900000-0xfe900fff irq 10 at device 4.0 on pci2 Jun 12 09:45:15 ozu4 /kernel: fxp0: Ethernet address 00:b0:d0:f0:76:de Jun 12 09:45:15 ozu4 /kernel: bpf: fxp0 attached Jun 12 09:45:15 ozu4 /kernel: pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 Jun 12 09:45:15 ozu4 /kernel: pci_open(1a): mode1res=0x80000000 (0x80000000) Jun 12 09:45:15 ozu4 /kernel: pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) Jun 12 09:45:15 ozu4 /kernel: pcib1: <ServerWorks host to PCI bridge> on motherboard Jun 12 09:45:15 ozu4 /kernel: found-> vendor=0x14e4, dev=0x1644, revid=0x10 Jun 12 09:45:15 ozu4 /kernel: class=02-00-00, hdrtype=0x00, mfdev=0 Jun 12 09:45:15 ozu4 /kernel: subordinatebus=0 secondarybus=0 Jun 12 09:45:15 ozu4 /kernel: intpin=a, irq=11 Jun 12 09:45:15 ozu4 /kernel: map[10]: type 1, range 64, base feb00000, size 16 Jun 12 09:45:15 ozu4 /kernel: pci1: <PCI bus> on pcib1 Jun 12 09:45:15 ozu4 /kernel: pci1: <unknown card> (vendor=0x14e4, dev=0x1644) at 8.0 irq 11 Jun 12 09:45:15 ozu4 /kernel: pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 Jun 12 09:45:15 ozu4 /kernel: pci_open(1a): mode1res=0x80000000 (0x80000000) Jun 12 09:45:15 ozu4 /kernel: pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00081166) Jun 12 09:45:15 ozu4 /kernel: pci-: pci3 exists, using next available unit number Jun 12 09:45:15 ozu4 /kernel: pcib3: <ServerWorks host to PCI bridge> on motherboard Jun 12 09:45:15 ozu4 /kernel: pci4: <PCI bus> on pcib3 Jun 12 09:45:15 ozu4 /kernel: ex_isa_identify() Jun 12 09:45:15 ozu4 /kernel: ata-: ata0 exists, using next available unit number Jun 12 09:45:15 ozu4 /kernel: ata-: ata1 exists, using next available unit number Jun 12 09:45:15 ozu4 /kernel: Trying Read_Port at 203 Jun 12 09:45:15 ozu4 /kernel: Trying Read_Port at 243 Jun 12 09:45:15 ozu4 /kernel: Trying Read_Port at 283 Jun 12 09:45:15 ozu4 /kernel: Trying Read_Port at 2c3 Jun 12 09:45:15 ozu4 /kernel: Trying Read_Port at 303 Jun 12 09:45:15 ozu4 /kernel: Trying Read_Port at 343 Jun 12 09:45:15 ozu4 /kernel: Trying Read_Port at 383 Jun 12 09:45:15 ozu4 /kernel: Trying Read_Port at 3c3 Jun 12 09:45:15 ozu4 /kernel: isa_probe_children: disabling PnP devices Jun 12 09:45:15 ozu4 /kernel: isa_probe_children: probing non-PnP devices Jun 12 09:45:15 ozu4 /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Jun 12 09:45:15 ozu4 /kernel: fdc0: FIFO enabled, 8 bytes threshold Jun 12 09:45:15 ozu4 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Jun 12 09:45:15 ozu4 /kernel: ata2 failed to probe at port 0x1f0 irq 14 on isa0 Jun 12 09:45:15 ozu4 /kernel: ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 Jun 12 09:45:15 ozu4 /kernel: ata3: mask=00 status0=ff status1=ff Jun 12 09:45:15 ozu4 /kernel: ata3: probe allocation failed Jun 12 09:45:15 ozu4 /kernel: ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0 Jun 12 09:45:15 ozu4 /kernel: adv0 failed to probe at port 0x330 on isa0 Jun 12 09:45:15 ozu4 /kernel: bt0: Failed Status Reg Test - ff Jun 12 09:45:15 ozu4 /kernel: bt_isa_probe: Probe failed at 0x330 Jun 12 09:45:15 ozu4 /kernel: bt0: Failed Status Reg Test - ff Jun 12 09:45:15 ozu4 /kernel: bt_isa_probe: Probe failed at 0x334 Jun 12 09:45:15 ozu4 /kernel: bt0: Failed Status Reg Test - ff Jun 12 09:45:15 ozu4 /kernel: bt_isa_probe: Probe failed at 0x230 Jun 12 09:45:15 ozu4 /kernel: bt0: Failed Status Reg Test - ff Jun 12 09:45:15 ozu4 /kernel: bt_isa_probe: Probe failed at 0x234 Jun 12 09:45:15 ozu4 /kernel: bt0: Failed Status Reg Test - ff Jun 12 09:45:15 ozu4 /kernel: bt_isa_probe: Probe failed at 0x130 Jun 12 09:45:15 ozu4 /kernel: bt0: Failed Status Reg Test - ff Jun 12 09:45:16 ozu4 /kernel: bt_isa_probe: Probe failed at 0x134 Jun 12 09:45:16 ozu4 /kernel: bt0 failed to probe at port 0x134-0x137 on isa0 Jun 12 09:45:16 ozu4 /kernel: aha0: status reg test failed ff Jun 12 09:45:16 ozu4 last message repeated 5 times Jun 12 09:45:16 ozu4 /kernel: aha0 failed to probe at port 0x134-0x137 on isa0 Jun 12 09:45:16 ozu4 /kernel: aic0 failed to probe at port 0x140-0x15f on isa0 Jun 12 09:45:16 ozu4 /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Jun 12 09:45:16 ozu4 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Jun 12 09:45:16 ozu4 /kernel: atkbd: the current kbd controller command byte 0065 Jun 12 09:45:16 ozu4 /kernel: atkbd: keyboard ID 0x41ab (2) Jun 12 09:45:16 ozu4 /kernel: kbd0 at atkbd0 Jun 12 09:45:16 ozu4 /kernel: kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 Jun 12 09:45:16 ozu4 /kernel: psm0: current command byte:0065 Jun 12 09:45:16 ozu4 /kernel: psm0: failed to reset the aux device. Jun 12 09:45:16 ozu4 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jun 12 09:45:16 ozu4 /kernel: fb0: vga0, vga, type:VGA (5), flags:0x7007f Jun 12 09:45:16 ozu4 /kernel: fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 Jun 12 09:45:16 ozu4 /kernel: fb0: init mode:24, bios mode:3, current mode:24 Jun 12 09:45:16 ozu4 /kernel: fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k Jun 12 09:45:16 ozu4 /kernel: VGA parameters upon power-up Jun 12 09:45:16 ozu4 /kernel: 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 Jun 12 09:45:16 ozu4 /kernel: bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 Jun 12 09:45:16 ozu4 /kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c Jun 12 09:45:16 ozu4 /kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff Jun 12 09:45:16 ozu4 /kernel: VGA parameters in BIOS for mode 24 Jun 12 09:45:16 ozu4 /kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 Jun 12 09:45:16 ozu4 /kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 Jun 12 09:45:16 ozu4 /kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c Jun 12 09:45:16 ozu4 /kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff Jun 12 09:45:16 ozu4 /kernel: EGA/VGA parameters to be used for mode 24 Jun 12 09:45:16 ozu4 /kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 Jun 12 09:45:16 ozu4 /kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 Jun 12 09:45:16 ozu4 /kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c Jun 12 09:45:16 ozu4 /kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff Jun 12 09:45:16 ozu4 /kernel: sc0: <System console> at flags 0x100 on isa0 Jun 12 09:45:16 ozu4 /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jun 12 09:45:16 ozu4 /kernel: sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) Jun 12 09:45:16 ozu4 /kernel: pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 Jun 12 09:45:16 ozu4 /kernel: pcic1: not probed (disabled) Jun 12 09:45:16 ozu4 /kernel: sio0: irq maps: 0x41 0x51 0x41 0x41 Jun 12 09:45:16 ozu4 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Jun 12 09:45:16 ozu4 /kernel: sio0: type 16550A Jun 12 09:45:16 ozu4 /kernel: sio1: irq maps: 0x41 0x49 0x41 0x41 Jun 12 09:45:16 ozu4 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Jun 12 09:45:16 ozu4 /kernel: sio1: type 16550A Jun 12 09:45:16 ozu4 /kernel: sio2: not probed (disabled) Jun 12 09:45:16 ozu4 /kernel: sio3: not probed (disabled) Jun 12 09:45:16 ozu4 /kernel: ppc0: parallel port found at 0x378 Jun 12 09:45:16 ozu4 /kernel: ppc0: using extended I/O port range Jun 12 09:45:16 ozu4 /kernel: ppc0: ECP SPP SPP Jun 12 09:45:16 ozu4 /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Jun 12 09:45:16 ozu4 /kernel: ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode Jun 12 09:45:16 ozu4 /kernel: ppc0: FIFO with 16/16/8 bytes threshold Jun 12 09:45:16 ozu4 /kernel: plip0: <PLIP network interface> on ppbus0 Jun 12 09:45:16 ozu4 /kernel: bpf: lp0 attached Jun 12 09:45:16 ozu4 /kernel: lpt0: <Printer> on ppbus0 Jun 12 09:45:16 ozu4 /kernel: lpt0: Interrupt-driven port Jun 12 09:45:16 ozu4 /kernel: ppi0: <Parallel I/O> on ppbus0 Jun 12 09:45:16 ozu4 /kernel: ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 Jun 12 09:45:16 ozu4 /kernel: fe0 failed to probe at port 0x300-0x31f on isa0 Jun 12 09:45:16 ozu4 /kernel: ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 Jun 12 09:45:16 ozu4 /kernel: lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 Jun 12 09:45:16 ozu4 /kernel: cs0 failed to probe at port 0x300-0x31f on isa0 Jun 12 09:45:16 ozu4 /kernel: sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 Jun 12 09:45:16 ozu4 /kernel: isa_probe_children: probing PnP devices Jun 12 09:45:16 ozu4 /kernel: BIOS Geometries: Jun 12 09:45:16 ozu4 /kernel: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors Jun 12 09:45:16 ozu4 /kernel: 1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors Jun 12 09:45:16 ozu4 /kernel: 0 accounted for Jun 12 09:45:16 ozu4 /kernel: Device configuration finished. Jun 12 09:45:16 ozu4 /kernel: bpf: faith0 attached Jun 12 09:45:16 ozu4 /kernel: bpf: gif0 attached Jun 12 09:45:16 ozu4 /kernel: bpf: gif1 attached Jun 12 09:45:16 ozu4 /kernel: bpf: gif2 attached Jun 12 09:45:16 ozu4 /kernel: bpf: gif3 attached Jun 12 09:45:16 ozu4 /kernel: bpf: lo0 attached Jun 12 09:45:16 ozu4 /kernel: bpf: ppp0 attached Jun 12 09:45:16 ozu4 /kernel: new masks: bio 684040, tty 63009a, net 67049a Jun 12 09:45:16 ozu4 /kernel: bpf: sl0 attached Jun 12 09:45:16 ozu4 /kernel: ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 Jun 12 09:45:16 ozu4 /kernel: ata0-master: success setting PIO4 on generic chip Jun 12 09:45:16 ozu4 /kernel: acd0: <SAMSUNG CD-ROM SN-124/q008> CDROM drive at ata0 as master Jun 12 09:45:16 ozu4 /kernel: acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 Jun 12 09:45:16 ozu4 /kernel: acd0: Reads: CD-R, CD-RW, CD-DA stream, packet Jun 12 09:45:16 ozu4 /kernel: acd0: Audio: play, 255 volume levels Jun 12 09:45:16 ozu4 /kernel: acd0: Mechanism: ejectable tray Jun 12 09:45:16 ozu4 /kernel: acd0: Medium: no/blank disc inside, unlocked Jun 12 09:45:16 ozu4 /kernel: Waiting 15 seconds for SCSI devices to settle Jun 12 09:45:16 ozu4 /kernel: (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. Jun 12 09:45:16 ozu4 /kernel: (ahc0:A:1:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 Jun 12 09:45:16 ozu4 /kernel: (ahc0:A:1:0): Received PPR width 1, period 9, offset 7f,options 2 Jun 12 09:45:16 ozu4 /kernel: Filtered to width 1, period 9, offset 7f, options 2 Jun 12 09:45:16 ozu4 /kernel: ahc0: target 1 using 16bit transfers Jun 12 09:45:16 ozu4 /kernel: ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x7f Jun 12 09:45:16 ozu4 /kernel: (ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 Jun 12 09:45:16 ozu4 /kernel: (ahc0:A:0:0): Received PPR width 1, period 9, offset 7f,options 2 Jun 12 09:45:16 ozu4 /kernel: Filtered to width 1, period 9, offset 7f, options 2 Jun 12 09:45:16 ozu4 /kernel: ahc0: target 0 using 16bit transfers Jun 12 09:45:16 ozu4 /kernel: ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f Jun 12 09:45:16 ozu4 /kernel: Creating DISK da0 Jun 12 09:45:16 ozu4 /kernel: Creating DISK da1 Jun 12 09:45:16 ozu4 /kernel: pass0 at ahc0 bus 0 target 0 lun 0 Jun 12 09:45:16 ozu4 /kernel: pass0: <QUANTUM ATLAS10K2-TY092J DA40> Fixed Direct Access SCSI-3 device Jun 12 09:45:16 ozu4 /kernel: pass0: Serial Number 169109840776 Jun 12 09:45:16 ozu4 /kernel: pass0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled Jun 12 09:45:16 ozu4 /kernel: pass1 at ahc0 bus 0 target 1 lun 0 Jun 12 09:45:16 ozu4 /kernel: pass1: <QUANTUM ATLAS10K2-TY092J DA40> Fixed Direct Access SCSI-3 device Jun 12 09:45:16 ozu4 /kernel: pass1: Serial Number 169102141257 Jun 12 09:45:16 ozu4 /kernel: pass1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled Jun 12 09:45:16 ozu4 /kernel: pass2 at ahc0 bus 0 target 6 lun 0 Jun 12 09:45:16 ozu4 /kernel: pass2: < 1x4 U2W SCSI BP 1.24> Fixed Processor SCSI-2 device Jun 12 09:45:16 ozu4 /kernel: pass2: Serial Number 1 Jun 12 09:45:16 ozu4 /kernel: pass2: 3.300MB/s transfers Jun 12 09:45:16 ozu4 /kernel: pass2 at ahc0 bus 0 target 6 lun 0 Jun 12 09:45:16 ozu4 /kernel: pass2: < 1x4 U2W SCSI BP 1.24> Fixed Processor SCSI-2 device Jun 12 09:45:16 ozu4 /kernel: pass2: Serial Number 1 Jun 12 09:45:16 ozu4 /kernel: pass2: 3.300MB/s transfers Jun 12 09:45:16 ozu4 /kernel: da0 at ahc0 bus 0 target 0 lun 0 Jun 12 09:45:16 ozu4 /kernel: da0: <QUANTUM ATLAS10K2-TY092J DA40> Fixed Direct Access SCSI-3 device Jun 12 09:45:16 ozu4 /kernel: da0: Serial Number 169109840776 Jun 12 09:45:16 ozu4 /kernel: da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled Jun 12 09:45:16 ozu4 /kernel: da0: 8683MB (17783239 512 byte sectors: 255H 63S/T 1106C) Jun 12 09:45:16 ozu4 /kernel: da1 at ahc0 bus 0 target 1 lun 0 Jun 12 09:45:17 ozu4 /kernel: da1: <QUANTUM ATLAS10K2-TY092J DA40> Fixed Direct Access SCSI-3 device Jun 12 09:45:17 ozu4 /kernel: da1: Serial Number 169102141257 Jun 12 09:45:17 ozu4 /kernel: da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled Jun 12 09:45:17 ozu4 /kernel: da1: 8683MB (17783239 512 byte sectors: 255H 63S/T 1106C) Jun 12 09:45:17 ozu4 /kernel: Mounting root from ufs:/dev/da0s1a Jun 12 09:45:17 ozu4 /kernel: da0s1: type 0xa5, start 63, end = 257039, size 256977 : OK Jun 12 09:45:17 ozu4 /kernel: da0s2: type 0xa5, start 257040, end = 17767889, size 17510850 : OK Jun 12 09:45:17 ozu4 /kernel: start_init: trying /sbin/init Jun 12 09:45:21 ozu4 login: ROOT LOGIN (root) ON ttyv0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01061210385807.17016>