Date: Thu, 9 Aug 2007 01:46:10 -0700 From: Ulf Zimmermann <ulf@Alameda.net> To: Konrad Heuer <kheuer2@gwdg.de> Cc: freebsd-scsi@freebsd.org, Ingeborg Hellemo <Ingeborg.Hellemo@cc.uit.no>, freebsd-questions@freebsd.org Subject: Re: Qlogic FC-card can't find disk on SATAbeast Message-ID: <20070809084610.GG824@evil.alameda.net> In-Reply-To: <20070809100509.X82810@gwdu60.gwdg.de> References: <200708090639.l796dKLJ073662@barnetv.cc.uit.no> <20070809100509.X82810@gwdu60.gwdg.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Aug 09, 2007 at 10:08:02AM +0200, Konrad Heuer wrote: > > On Thu, 9 Aug 2007, Ingeborg Hellemo wrote: > > >(This SAN-stuff is one of my weak subjects, so please excuse me if I use > >the > >wrong terms. If there is a better list to ask this question, please tell > >me.) > > > > > >HW: ProLiant DL380 G4 > >OS: FreeBSD 6.2-RELEASE-p7 > >FC-card: > >isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x5000-0x50ff mem > >0xfdff0000-0xfdff0fff irq 97 at device 1.0 on pci10 > > > >~/#kldstat > >Id Refs Address Size Name > >1 9 0xc0400000 7261f4 kernel > >2 1 0xc0b27000 93040 ispfw.ko > >3 1 0xc0bbb000 59f20 acpi.ko > >4 1 0xc6dea000 16000 linux.ko > > > > > > > >I am trying to access a disk-device on a SATABeast, but no success: > > > >~/#camcontrol rescan all > >Re-scan of bus 0 was successful > >Re-scan of bus 1 was successful > >Re-scan of bus 2 was successful > >Re-scan of bus 3 was successful > > > >~/#camcontrol devlist -v > >scbus0 on ciss0 bus 0: > ><COMPAQ RAID 1 VOLUME OK> at scbus0 target 0 lun 0 (pass0,da0) > >scbus1 on ciss0 bus 32: > >scbus2 on ciss0 bus 33: > >scbus3 on isp0 bus 0: > >< > at scbus3 target -1 lun -1 () > >scbus-1 on xpt0 bus 0: > >< > at scbus-1 target -1 lun -1 (xpt0) > > > > > >If we try to connect the fibre to our HP EVA SAN the disk shows up after a > >'rescan all' which makes me believe that I have not done any major > >screw-ups > >in configuring the card. > > > >I can see the device and LUN-number if I enter the cards BIOS, but not from > >FreeBSD. We have tried changing disk-size and LUN-number on the Beast. > > > > > >Any ideas? > > In such a case I'd try to boot the system using Knoppix or any other Linux > system. Maybe this will give you some additional diagnostics which helps > to make progress with FreeBSD. On the other hand, if Linux doesn't see the > disk too, you'd have to look closer to your hardware. Does your SATAbeast have a LUN exported to your host? -- Regards, Ulf. --------------------------------------------------------------------- Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-865-0204 You can find my resume at: http://www.Alameda.net/~ulf/resume.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070809084610.GG824>