From owner-freebsd-mobile Wed Feb 14 13:20:27 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from vagabond.noos.net (r234m82.cybercable.tm.fr [195.132.234.82]) by hub.freebsd.org (Postfix) with ESMTP id 8E01237B401 for ; Wed, 14 Feb 2001 13:19:33 -0800 (PST) Received: from (pda@localhost) by vagabond.noos.net (8.11.2/jtpda-5.3.2) id f1ELJQQ47863 ; Wed, 14 Feb 2001 22:19:26 +0100 (CET) Date: Wed, 14 Feb 2001 22:19:24 +0100 From: Pierre DAVID To: freebsd-mobile@freebsd.org Subject: NEWCARD & xl0: watchdog timeout Message-ID: <20010214221923.A42439@vagabond.ma.maison> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="azLHFNyN32YCQGCU" Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --azLHFNyN32YCQGCU Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi, I just upgraded my Dell Latitude LT from 4.2-RELEASE TO -current (just before 9h Feb): all is working perfectly with a GENERIC kernel, pccardd and a 3Com 3C589 Ethernet card. However, when I try to boot with a NEWCARD kernel: - with the 3Com 3C589, I cannot get anything from the network (ECHO packets are emitted, but nothing returns) - with a 3Com 3CCFE575BT-D (xl0) - which works like a charm with a Sony Vaio - I get lot of: xl0: watchdog timeout and all communications are sloooooow. Attached hereafter are the "boot -v" messages. Can somebody help me? Thanks in advance, Pierre --azLHFNyN32YCQGCU Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg-ep0 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Wed Feb 14 09:21:41 CET 2001 root@biceps:/users/obj/usr/src/sys/NEWCARD Calibrating clock(s) ... TSC clock: 262365789 Hz, i8254 clock: 1193064 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P55C (quarter-micron) (262.39-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x582 Stepping = 2 Features=0x8001bf real memory = 67043328 (65472K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00537000 - 0x03fe7fff, 61542400 bytes (15025 pages) avail memory = 60059648 (58652K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f62f0 bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd7e0+0x21a pnpbios: Found PnP BIOS data at 0xc00f6340 pnpbios: Entry = f0000:b99b Rev = 1.0 Other BIOS signatures found: Preloaded elf kernel "kernel" at 0xc0511000. Preloaded elf module "splash_bmp.ko" at 0xc05110a8. Preloaded splash_image_data "/boot/images/daemon.bmp" at 0xc051114c. Intel Pentium detected, installing workaround for F00F bug null: random: mem: WARNING: Driver mistake: destroy_dev on 154/0 Math emulator present splash: image@0xc04ff2fc, size:65074 splash_bmp: beyond screen capacity (320x200, 255 colors) bmp_start(): splash_mode:28 splash: image decoder found: splash_bmp Using $PIR table, 4 entries at 0xc00fdf90 apm0: on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 158052789 bytes/sec bzero() bandwidth = 514138817 bytes/sec pcib0: at pcibus 0 on motherboard pci0: physical bus=0 found-> vendor=0x8086, dev=0x7100, revid=0x01 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=1, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 map[20]: type 4, range 32, base 0000fcf0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=1, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 map[20]: type 4, range 32, base 0000fcc0, size 5, port disabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=1, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=255 map[90]: type 4, range 32, base 00002180, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=1, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 map[10]: type 3, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base fea00000, size 21, enabled map[18]: type 1, range 32, base fed00000, size 20, enabled found-> vendor=0x10c8, dev=0x0004, revid=0x01 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=0 found-> vendor=0x1180, dev=0x0475, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 pci0: on pcib0 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: at device 1.0 on pci0 isa0: on isab0 atapci0: port 0xfcf0-0xfcff at device 1.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed uhci0: at device 1.2 on pci0 uhci0: Could not map ports device_probe_and_attach: uhci0 attach returned 6 pci0: at 1.3 (no driver attached) pci0: at 2.0 (no driver attached) pccbb0: at device 10.0 on pci0 pccbb0: PCI Memory allocated: 44000000 pci_cfgintr_virgin: using routable interrupt 3 pci_cfgintr: 0:10 INTA routed to irq 3 cardbus0: on pccbb0 pccard0: <16-bit PCCard bus> on pccbb0 ex_isa_identify() pnpbios: 18 devices, largest 138 bytes PNP0c01: adding fixed memory32 range 0xca000-0xcbfff, size=0x2000 PNP0c01: skipping empty range PNP0c01: skipping empty range PNP0c01: skipping empty range PNP0c01: skipping empty range PNP0c01: end config pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1 PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1 PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0xd000-0xd000, size=0x1, align=0x1 PNP0c02: adding io range 0xd004-0xd004, size=0x1, align=0x1 PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1 PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1 PNP0c02: adding io range 0x2180-0x218f, size=0x10, align=0x1 PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 PNP0c02: end config pnpbios: handle 1 device ID PNP0c02 (020cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000 PNP0c01: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000 PNP0c01: end config pnpbios: handle 2 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 PNP0200: end config pnpbios: handle 3 device ID PNP0200 (0002d041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 PNP0000: end config pnpbios: handle 4 device ID PNP0000 (0000d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 PNP0100: end config pnpbios: handle 5 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 PNP0b00: end config pnpbios: handle 6 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 PNP0303: end config pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 PNP0c04: end config pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 PNP0800: end config pnpbios: handle 9 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0a03: end config pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 PNP0e03: end config pnpbios: handle 11 device ID PNP0e03 (030ed041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x10 PNP0501: end config pnpbios: handle 17 device ID PNP0501 (0105d041) PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8 PNP0400: adding irq mask 0x80 PNP0400: end config pnpbios: handle 19 device ID PNP0400 (0004d041) CSC0000: adding io range 0x530-0x537, size=0x8, align=0x1 CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8 CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20 CSC0000: adding dma mask 0x2 CSC0000: adding dma mask 0x8 CSC0000: adding irq mask 0x20 CSC0000: end config pnpbios: handle 23 device ID CSC0000 (0000630e) CSC0010: adding io range 0xf00-0xf07, size=0x8, align=0x8 CSC0010: end config pnpbios: handle 26 device ID CSC0010 (1000630e) PNP0f13: end config pnpbios: handle 27 device ID PNP0f13 (130fd041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: end config pnpbios: handle 28 device ID PNP0700 (0007d041) ata-: ata0 already exists, using ata2 instead ata-: ata1 already exists, using ata3 instead Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc-: sc0 already exists, using sc1 instead vga-: vga0 already exists, using vga1 instead isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices adv0 failed to probe at port 0x330 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata3: mask=00 status0=ff status1=ff ata3: probe allocation failed ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 10 on isa0 pcic ident regs: 0x83 0xff 0xff 0xff pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only pccard1: <16-bit PCCard bus> on pcic0 pcic0: bus_space_alloc range 0x0330-0x03ff (probed) pmtimer0 on isa0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus0 bpf: lp0 attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: Cannot allocate irq sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 sc1: no video adapter is found. sc1: failed to probe on isa0 vga1: failed to probe on isa0 isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x65 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe. unknown: can't assign resources unknown: at port 0x70-0x71 on isa0 unknown: can't assign resources unknown: at port 0x60 on isa0 adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe. unknown: failed to probe at port 0x61 on isa0 adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe. unknown: can't assign resources unknown: at port 0x3e0-0x3e1 on isa0 unknown: can't assign resources unknown: at port 0x3f8-0x3ff on isa0 unknown: can't assign resources unknown: at port 0x378-0x37f on isa0 pcm0: at port 0x530-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,3 on isa0 pcm: setmap 6c7000, 1000; 0xc5d13000 -> 6c7000 pcm: setmap 6c8000, 1000; 0xc5d14000 -> 6c8000 adv1: Invalid baseport of 0xf00 specified. Nearest valid baseport is 0x330. Failing probe. unknown: failed to probe at port 0xf00-0xf0f on isa0 unknown: failed to probe at port 0x330 on isa0 unknown: can't assign resources unknown: at port 0x3f0-0x3f5 on isa0 BIOS Geometries: 0:020cfe3f 0..524=525 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: ppp0 attached bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached ata0-master: success setting UDMA2 on PIIX4 chip Creating DISK ad0 ad0: ATA-4 disk at ata0-master ad0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 ad0: 4126MB [8944/15/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s2a ad0s1: type 0xb, start 63, end = 819314, size 819252 : OK ad0s2: type 0xa5, start 819315, end = 8450189, size 7630875 : OK pccbb0: card inserted: event=0x00000000, state=30000410 pccard0: chip_socket_enable pccbb_pcic_socket_enable: pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15] pccbb0: pccbb_pcic_wait_ready: status 0x7f pccbb0: card type is mem pccard0: read_cis pccbb_pcic_mem_map window 0 bus 44001000+400+bbfff000 card addr 0 pccbb_pcic_do_mem_map window 0: 8001 8001 3fff 44 (44001000+00000400.00001000*bbfff000) pccbb_pcic_do_mem_map window 0: 8001 8001 7fff 44 (44001000+00000400.00001000*bbfff000) cis mem map c6365000 pccard0: CIS tuple chain: CISTPL_DEVICE type=null speed=null 01 02 00 ff CISTPL_DEVICE_A type=eeprom speed=150ns 17 03 43 02 ff CISTPL_MANFID 20 04 01 01 89 05 CISTPL_FUNCID 21 02 06 00 CISTPL_VERS_1 15 39 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69 6f 6e 00 33 43 35 38 39 00 54 50 2f 42 4e 43 20 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20 32 61 00 30 30 30 30 30 32 00 ff CISTPL_CONFIG 1a 06 02 03 00 00 01 03 CISTPL_CFTABLE_ENTRY 1b 0f c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff CISTPL_CFTABLE_ENTRY 1b 07 03 01 71 55 26 26 54 unhandled CISTPL 19 19 03 00 00 ff CISTPL_NO_LINK 14 00 CISTPL_CHECKSUM addr=0 len=80 cksum=0 ok 10 05 89 ff 80 00 00 CISTPL_END ff pccard0: check_cis_quirks pccard0: CIS version PCCARD 2.0 or 2.1 pccard0: CIS info: 3Com Corporation, 3C589, TP/BNC LAN Card Ver. 2a, 000002 pccard0: Manufacturer code 0x101, product 0x589 pccard0: function 0: network adapter, ccr addr 10000 mask 3 pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel pccard0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel pccard0: functions scanning pccbb_pcic_socket_enable: pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15] pccbb0: pccbb_pcic_wait_ready: status 0x7f pccbb0: card type is io pccard0: ++enabled_count = 1 pccbb_pcic_mem_map window 0 bus 44001000+400+bbfff000 card addr 0 pccbb_pcic_do_mem_map window 0: 8001 8001 3fff 44 (44001000+00000400.00001000*bbfff000) pccard0: ccr_res == 44001000-440013ff, base=10000 pccbb_pcic_do_mem_map window 0: 8001 8001 7fff 44 (44001000+00000400.00001000*bbfff000) pccbb_pcic_do_mem_map window 0: 8001 8001 400f 44 (44001000+00000400.00001000*bc00f000) pccard0: function 0 CCR at 0 offset 0: 41 0 41 0, 0 41 0 41, 0 ep0: <3Com 3c589 10Mbps Ethernet> at port 0x100-0x10f irq 3 function 0 config 1 on pccard0 pccbb_pcic_io_map window 0 auto port 100+10 pccbb_pcic_do_io_map window 0: 0100 010f (00000100+00000010) pccbb_pcic_io_map window 0 auto port 100+10 pccbb_pcic_do_io_map window 0: 0100 010f (00000100+00000010) ep0: Ethernet address 00:a0:24:a5:4b:22 bpf: ep0 attached pccard0: function 0 CCR at 0 offset 0: 45 0 45 0, 0 45 0 45, 0 start_init: trying /sbin/init Connection attempt to UDP 192.44.67.2:1024 from 192.44.67.6:53 Connection attempt to UDP 192.44.67.2:1025 from 192.44.67.6:53 --azLHFNyN32YCQGCU Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg-xl0 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Wed Feb 14 09:21:41 CET 2001 root@biceps:/users/obj/usr/src/sys/NEWCARD Calibrating clock(s) ... TSC clock: 262364233 Hz, i8254 clock: 1193059 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P55C (quarter-micron) (262.39-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x582 Stepping = 2 Features=0x8001bf real memory = 67043328 (65472K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00537000 - 0x03fe7fff, 61542400 bytes (15025 pages) avail memory = 60059648 (58652K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f62f0 bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd7e0+0x21a pnpbios: Found PnP BIOS data at 0xc00f6340 pnpbios: Entry = f0000:b99b Rev = 1.0 Other BIOS signatures found: Preloaded elf kernel "kernel" at 0xc0511000. Preloaded elf module "splash_bmp.ko" at 0xc05110a8. Preloaded splash_image_data "/boot/images/daemon.bmp" at 0xc051114c. Intel Pentium detected, installing workaround for F00F bug null: random: mem: WARNING: Driver mistake: destroy_dev on 154/0 Math emulator present splash: image@0xc04ff2fc, size:65074 splash_bmp: beyond screen capacity (320x200, 255 colors) bmp_start(): splash_mode:28 splash: image decoder found: splash_bmp Using $PIR table, 4 entries at 0xc00fdf90 apm0: on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 158077774 bytes/sec bzero() bandwidth = 512820512 bytes/sec pcib0: at pcibus 0 on motherboard pci0: physical bus=0 found-> vendor=0x8086, dev=0x7100, revid=0x01 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=1, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 map[20]: type 4, range 32, base 0000fcf0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=1, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 map[20]: type 4, range 32, base 0000fcc0, size 5, port disabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=1, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=255 map[90]: type 4, range 32, base 00002180, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=1, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 map[10]: type 3, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base fea00000, size 21, enabled map[18]: type 1, range 32, base fed00000, size 20, enabled found-> vendor=0x10c8, dev=0x0004, revid=0x01 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=0 found-> vendor=0x1180, dev=0x0475, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 pci0: on pcib0 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: at device 1.0 on pci0 isa0: on isab0 atapci0: port 0xfcf0-0xfcff at device 1.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed uhci0: at device 1.2 on pci0 uhci0: Could not map ports device_probe_and_attach: uhci0 attach returned 6 pci0: at 1.3 (no driver attached) pci0: at 2.0 (no driver attached) pccbb0: at device 10.0 on pci0 pccbb0: PCI Memory allocated: 44000000 pci_cfgintr_virgin: using routable interrupt 3 pci_cfgintr: 0:10 INTA routed to irq 3 cardbus0: on pccbb0 pccard0: <16-bit PCCard bus> on pccbb0 ex_isa_identify() pnpbios: 18 devices, largest 138 bytes PNP0c01: adding fixed memory32 range 0xca000-0xcbfff, size=0x2000 PNP0c01: skipping empty range PNP0c01: skipping empty range PNP0c01: skipping empty range PNP0c01: skipping empty range PNP0c01: end config pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1 PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1 PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0xd000-0xd000, size=0x1, align=0x1 PNP0c02: adding io range 0xd004-0xd004, size=0x1, align=0x1 PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1 PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1 PNP0c02: adding io range 0x2180-0x218f, size=0x10, align=0x1 PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 PNP0c02: end config pnpbios: handle 1 device ID PNP0c02 (020cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000 PNP0c01: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000 PNP0c01: end config pnpbios: handle 2 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 PNP0200: end config pnpbios: handle 3 device ID PNP0200 (0002d041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 PNP0000: end config pnpbios: handle 4 device ID PNP0000 (0000d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 PNP0100: end config pnpbios: handle 5 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 PNP0b00: end config pnpbios: handle 6 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 PNP0303: end config pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 PNP0c04: end config pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 PNP0800: end config pnpbios: handle 9 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0a03: end config pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 PNP0e03: end config pnpbios: handle 11 device ID PNP0e03 (030ed041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x10 PNP0501: end config pnpbios: handle 17 device ID PNP0501 (0105d041) PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8 PNP0400: adding irq mask 0x80 PNP0400: end config pnpbios: handle 19 device ID PNP0400 (0004d041) CSC0000: adding io range 0x530-0x537, size=0x8, align=0x1 CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8 CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20 CSC0000: adding dma mask 0x2 CSC0000: adding dma mask 0x8 CSC0000: adding irq mask 0x20 CSC0000: end config pnpbios: handle 23 device ID CSC0000 (0000630e) CSC0010: adding io range 0xf00-0xf07, size=0x8, align=0x8 CSC0010: end config pnpbios: handle 26 device ID CSC0010 (1000630e) PNP0f13: end config pnpbios: handle 27 device ID PNP0f13 (130fd041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: end config pnpbios: handle 28 device ID PNP0700 (0007d041) ata-: ata0 already exists, using ata2 instead ata-: ata1 already exists, using ata3 instead Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc-: sc0 already exists, using sc1 instead vga-: vga0 already exists, using vga1 instead isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices adv0 failed to probe at port 0x330 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata3: mask=00 status0=ff status1=ff ata3: probe allocation failed ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 10 on isa0 pcic ident regs: 0x83 0xff 0xff 0xff pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only pccard1: <16-bit PCCard bus> on pcic0 pcic0: bus_space_alloc range 0x0330-0x03ff (probed) pmtimer0 on isa0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus0 bpf: lp0 attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: Cannot allocate irq sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 sc1: no video adapter is found. sc1: failed to probe on isa0 vga1: failed to probe on isa0 isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x65 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe. unknown: can't assign resources unknown: at port 0x70-0x71 on isa0 unknown: can't assign resources unknown: at port 0x60 on isa0 adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe. unknown: failed to probe at port 0x61 on isa0 adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe. unknown: can't assign resources unknown: at port 0x3e0-0x3e1 on isa0 unknown: can't assign resources unknown: at port 0x3f8-0x3ff on isa0 unknown: can't assign resources unknown: at port 0x378-0x37f on isa0 pcm0: at port 0x530-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,3 on isa0 pcm: setmap 6c7000, 1000; 0xc5d13000 -> 6c7000 pcm: setmap 6c8000, 1000; 0xc5d14000 -> 6c8000 adv1: Invalid baseport of 0xf00 specified. Nearest valid baseport is 0x330. Failing probe. unknown: failed to probe at port 0xf00-0xf0f on isa0 unknown: failed to probe at port 0x330 on isa0 unknown: can't assign resources unknown: at port 0x3f0-0x3f5 on isa0 BIOS Geometries: 0:020cfe3f 0..524=525 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: ppp0 attached bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached ata0-master: success setting UDMA2 on PIIX4 chip Creating DISK ad0 ad0: ATA-4 disk at ata0-master ad0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 ad0: 4126MB [8944/15/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s2a ad0s1: type 0xb, start 63, end = 819314, size 819252 : OK ad0s2: type 0xa5, start 819315, end = 8450189, size 7630875 : OK pccbb0: card inserted: event=0x00000000, state=30000820 pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11] found-> vendor=0x10b7, dev=0x5157, revid=0x01 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=128 TUPLE: LINKTARGET [3]: 43 49 53 Manufacturer ID: 01015751 TUPLE: CONFIG_CB [6]: 03 01 00 00 00 00 TUPLE: CFTABLE_ENTRY_CB [12]: 41 9a 01 b5 1e 01 55 02 30 ff ff 01 cardbus0: Opening BAR: type=IO, bar=10, len=0040 Product version: 5.0 Product name: 3Com Corporation | 3CCFE575BT | LAN Cardbus Card | 001 | Functions: Network Adaptor, Memory TUPLE: CFTABLE_ENTRY_CB [6]: 00 80 80 80 80 19 CIS reading done xl0: <3Com 3c575B Fast Etherlink XL> port 0x3000-0x307f mem 0x44020000-0x4403ffff,0x44001080-0x440010ff,0x44001000-0x4400107f irq 3 at device 0.0 on cardbus0 xl0: Ethernet address: 00:50:04:8c:d4:ae xl0: media options word: 40 xl0: found MII/AUTO miibus0: on xl0 ukphy0: on miibus0 ukphy0: OUI 0x00c000, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached start_init: trying /sbin/init xl0: watchdog timeout --azLHFNyN32YCQGCU-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message