From owner-freebsd-stable Mon May 17 10:23:28 1999 Delivered-To: freebsd-stable@freebsd.org Received: from fed-ef1.frb.gov (fed.frb.gov [132.200.32.32]) by hub.freebsd.org (Postfix) with ESMTP id AB0C214E04 for ; Mon, 17 May 1999 10:23:24 -0700 (PDT) (envelope-from seth@freebie.dp.ny.frb.org) Received: by fed-ef1.frb.gov; id NAA10521; Mon, 17 May 1999 13:23:23 -0400 (EDT) Received: from m1pmdf.frb.gov(192.168.3.38) by fed.frb.gov via smap (V4.2) id xma009887; Mon, 17 May 99 13:22:36 -0400 Date: Mon, 17 May 1999 13:22:27 -0400 (EDT) From: Seth Subject: 3.1-stable to 3.2-stable weirdness To: freebsd-stable@freebsd.org Message-id: MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG OK, it's probably my fault, but I finally did a build/installworld to 3.2-STABLE (as of ctm 142). Everything went great, and I compiled a new kernel. The kernel won't boot. I get the following: changing root device to da0s1a changing root device to da0a error 6: panic: cannot mount root (2) and drop into the debugger. The old (3.1-stable) kernel works fine and can mount root. I DID mess around w/ /dev... did sh MAKEDEV all per the instructions, doing the ls | awk business before and after. There were no major differences. Please let me know what other information to include (I've attached dmesg from the successful -- 3.1-stable -- boot). Notice that it successfully changes the root device to da0s1a. Thanks for any help. SB Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.1-STABLE #0: Tue Apr 27 14:41:30 EDT 1999 seth@freebie.dp.ny.frb.org:/usr/home/seth/freebsd/src/sys/compile/KERNEL-F Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (686-class CPU) Origin = "GenuineIntel" Id = 0x653 Stepping=3 Features=0x183fbff> real memory = 402653184 (393216K bytes) avail memory = 388853760 (379740K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel.good" at 0xc02cd000. Probing for devices on PCI bus 0: chip0: rev 0x00 on pci0.0.0 chip1: rev 0x00 on pci0.1.0 chip2: rev 0x02 on pci0.7.0 chip3: rev 0x02 on pci0.7.3 xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 16 on pci0.13.0 xl0: Ethernet address: 00:10:5a:22:14:82 xl0: autoneg complete, link status good (half-duplex, 100Mbps) xl1: <3Com 3c905B-TX Fast Etherlink XL> rev 0x24 int a irq 17 on pci0.17.0 xl1: Ethernet address: 00:c0:4f:68:dc:ec xl1: autoneg complete, link status good (half-duplex, 100Mbps) chip4: rev 0x03 on pci0.19.0 Probing for devices on PCI bus 1: vga0: rev 0x01 int a irq 16 on pci1.0.0 Probing for devices on PCI bus 2: ahc0: rev 0x00 int a irq 18 on pci2.10.0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: rev 0x01 int a irq 18 on pci2.14.0 ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in ppc0 at 0x378 irq 7 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppi0: on ppbus 0 plip0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 Waiting 8 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! sa0 at ahc1 bus 0 target 6 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) changing root device to da0s1a cd0 at ahc1 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates xl1: selecting MII, 100Mbps, half duplex xl1: selecting MII, 100Mbps, full duplex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message