Date: Wed, 25 Sep 2002 18:18:47 +0200 From: Eric Masson <e-masson@kisoft-services.com> To: Bruce M Simpson <bms@spc.org> Cc: Mailing List FreeBSD Mobile <freebsd-mobile@FreeBSD.org> Subject: Re: CF card & pcmcia adapter issues Message-ID: <86ptv23uvs.fsf@notbsdems.nantes.kisoft-services.com> In-Reply-To: <20020925154908.GN26280@spc.org> (Bruce M Simpson's message of "Wed, 25 Sep 2002 16:49:08 %2B0100") References: <86d6r25d0j.fsf@notbsdems.nantes.kisoft-services.com> <20020925154908.GN26280@spc.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-=-= Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit >>>>> "Bruce" == Bruce M Simpson <Bruce> writes: Bruce> In order to get various flavours of CF to work I used the Bruce> following:- <snip pccard.conf entries> I'll have a look asap. Bruce> Enclose a 'pccard dumpcis' and we may be able to help further, Bruce> but try tailoring one of those regexps to suit your card's CIS. Attached. Regards Eric Masson -- > C'est malheureux de constater k'apres kelkes millers d'années d'evolution, > les hommes sont encore au stade *primitive* : peur de ce k'on ne connait > pas, juger ses sembles a tout prix, coller une etiquette et j'en passe. -+- Gl in : <http://www.le-gnu.net> - fufe, c'est du Darwin -+- --=-=-= Content-Disposition: attachment; filename=dumpcis.txt Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: d9 01 ff Common memory device information: Device number 1, type Function specific, WPS = ON Speed = 250nS, Memory block size = 2Kb, 1 units Tuple #2, code = 0x1c (Other conditions for common memory), length = 4 000: 03 d9 01 ff (MWAIT) (3V card) Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2 000: df 01 Tuple #4, code = 0x20 (Manufacturer ID), length = 4 000: 01 4e 00 02 PCMCIA ID = 0x4e01, OEM ID = 0x200 Tuple #5, code = 0x15 (Version 1 info), length = 43 000: 04 01 44 45 4d 20 41 54 41 20 46 6c 61 73 68 20 010: 20 20 20 20 20 20 20 20 20 20 20 00 53 54 4f 52 020: 4d 20 20 00 53 54 4c 30 31 00 ff Version = 4.1, Manuf = [DEM ATA Flash ], card vers = [STORM ] Addit. info = [STL01] Tuple #6, code = 0x21 (Functional ID), length = 2 000: 04 01 Fixed disk card - POST initialize Tuple #7, code = 0x22 (Functional EXT), length = 2 000: 01 01 Disk interface: IDE Tuple #8, code = 0x22 (Functional EXT), length = 3 000: 02 04 5f Disk features: Silicon, Single Sleep, Standby, Idle, Low power, Reg inhibit, Iois16 Tuple #9, code = 0x1a (Configuration map), length = 5 000: 01 03 00 02 0f Reg len = 2, config register addr = 0x200, last config = 0x3 Registers: XXXX---- Tuple #10, code = 0x1b (Configuration entry), length = 11 000: c0 40 a1 27 55 4d 5d 75 08 00 21 Config index = 0x0(default) Interface byte = 0x40 (memory) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Max current average over 10 ms: 8 x 10mA Memory space length = 0x8 Max twin cards = 1 Misc attr: (Power down supported) Tuple #11, code = 0x1b (Configuration entry), length = 6 000: 00 01 21 b5 1e 4d Config index = 0x0 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #12, code = 0x1b (Configuration entry), length = 13 000: c1 41 99 27 55 4d 5d 75 64 f0 ff ff 21 Config index = 0x1(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Max current average over 10 ms: 8 x 10mA Card decodes 4 address lines, full 8/16 Bit I/O IRQ modes: Level, Pulse, Shared IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Max twin cards = 1 Misc attr: (Power down supported) Tuple #13, code = 0x1b (Configuration entry), length = 6 000: 01 01 21 b5 1e 4d Config index = 0x1 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #14, code = 0x1b (Configuration entry), length = 18 000: c2 41 99 27 55 4d 5d 75 ea 61 f0 01 07 f6 03 01 010: ee 21 Config index = 0x2(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Max current average over 10 ms: 8 x 10mA Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x1f0 block length = 0x8 I/O address # 2: block start = 0x3f6 block length = 0x2 IRQ modes: Level, Pulse, Shared IRQ level = 14 Max twin cards = 1 Misc attr: (Power down supported) Tuple #15, code = 0x1b (Configuration entry), length = 6 000: 02 01 21 b5 1e 4d Config index = 0x2 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #16, code = 0x1b (Configuration entry), length = 18 000: c3 41 99 27 55 4d 5d 75 ea 61 70 01 07 76 03 01 010: ee 21 Config index = 0x3(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Max current average over 10 ms: 8 x 10mA Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x170 block length = 0x8 I/O address # 2: block start = 0x376 block length = 0x2 IRQ modes: Level, Pulse, Shared IRQ level = 14 Max twin cards = 1 Misc attr: (Power down supported) Tuple #17, code = 0x1b (Configuration entry), length = 6 000: 03 01 21 b5 1e 4d Config index = 0x3 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #18, code = 0x14 (No link), length = 0 Tuple #19, code = 0xff (Terminator), length = 0 --=-=-=-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86ptv23uvs.fsf>