Date: Tue, 25 Nov 2008 09:31:44 -0800 From: "Jack Vogel" <jfvogel@gmail.com> To: "Jan Mikkelsen" <janm@transactionware.com> Cc: freebsd-net@freebsd.org Subject: Re: [em] 7.1-PRE, one em port works, one fails, no problem on 6.3-p1 Message-ID: <2a41acea0811250931x53e545b8qd392c56c7705104d@mail.gmail.com> In-Reply-To: <F414FED1A0AB4629A4BA123733C0E857@STUDYPC> References: <F414FED1A0AB4629A4BA123733C0E857@STUDYPC>
next in thread | previous in thread | raw e-mail | index | archive | help
There is a fix for this, but have not been able to get it in yet :( Jack On Tue, Nov 25, 2008 at 5:02 AM, Jan Mikkelsen <janm@transactionware.com>wrote: > Hi, > > On a machine with a Supermicro X7DB8 board I get this error on startup: > > em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x3020-0x303f mem > 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6 > em1: Using MSI interrupt > em1: Hardware Initialization Failed > em1: Unable to initialize the hardware > device_attach: em1 attach returned 5 > > There is no management card in this particular machine, and em0 on the same > motherboard is fine. I can see a few similar problems in the archives, but > I don't see a definitive solution. The same machine runs fine with 6.3-p1. > > Dmesg below. > > Any suggestions? > > Thanks, > > Jan Mikkelsen > > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-PRERELEASE #0: Tue Nov 25 10:07:25 EST 2008 > > root@dm.transactionware.com: > /home/janm/p4/freebsd-image-std-2008.2/work/base > -freebsd/home/janm/p4/freebsd-image-std-2008.2/FreeBSD/src/sys/TW-SMP > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(R) CPU 5140 @ 2.33GHz (2333.35-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA > ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > > Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA > > > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > usable memory = 4280651776 (4082 MB) > avail memory = 4117843968 (3927 MB) > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 6 > cpu3 (AP): APIC ID: 7 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <SMCI SMCISLP2> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 > pci4: <ACPI PCI bus> on pcib4 > ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0x2400-0x24ff,0x2000-0x20ff mem 0xd8500000-0xd8501fff irq 16 at device 2.0 > on pci4 > ahd0: [ITHREAD] > aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs > ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0x2c00-0x2cff,0x2800-0x28ff mem 0xd8502000-0xd8503fff irq 17 at device 2.1 > on pci4 > ahd1: [ITHREAD] > aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs > pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3 > pci5: <ACPI PCI bus> on pcib5 > bge0: <Altima Gigabit Ethernet Controller, ASIC rev. 0x105> mem > 0xd8600000-0xd860ffff irq 16 at device 1.0 on pci5 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5701 10/100/1000baseTX PHY> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bge0: Ethernet address: 00:40:f4:66:b1:56 > bge0: [ITHREAD] > pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 > pci6: <ACPI PCI bus> on pcib6 > em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x3000-0x301f mem > 0xd8400000-0xd841ffff irq 18 at device 0.0 on pci6 > em0: Using MSI interrupt > em0: [FILTER] > em0: Ethernet address: 00:30:48:31:67:86 > em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x3020-0x303f mem > 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6 > em1: Using MSI interrupt > em1: Hardware Initialization Failed > em1: Unable to initialize the hardware > device_attach: em1 attach returned 5 > pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1 > pci7: <ACPI PCI bus> on pcib7 > pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci8: <ACPI PCI bus> on pcib8 > pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci9: <ACPI PCI bus> on pcib9 > pcib10: <PCI-PCI bridge> at device 0.0 on pci9 > pci10: <PCI bus> on pcib10 > arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable) > > mem 0xd8900000-0xd8900fff,0xd8000000-0xd83fffff irq 16 at device 14.0 on > pci10 > ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07 > ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13 > arcmsr0: [ITHREAD] > pcib11: <PCI-PCI bridge> at device 0.2 on pci9 > pci11: <PCI bus> on pcib11 > pcib12: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci12: <ACPI PCI bus> on pcib12 > uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1800-0x181f > irq 17 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1820-0x183f > irq 19 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1840-0x185f > irq 18 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xd8c00000-0xd8c003ff irq 17 > at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <Intel 63XXESB USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 > uhub3: 6 ports with 6 removable, self powered > pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci13: <ACPI PCI bus> on pcib13 > vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem > 0xd0000000-0xd7ffffff,0xd8800000-0xd880ffff irq 18 at device 1.0 on pci13 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel 63XXESB2 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model Generic PS/2 mouse, device ID 0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > sio1: [FILTER] > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FILTER] > ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > ppbus0: [ITHREAD] > plip0: <PLIP network interface> on ppbus0 > plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ppc0: [GIANT-LOCKED] > ppc0: [ITHREAD] > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 728072806000728 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 728072806000728 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > cpu2: <ACPI CPU> on acpi0 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 728072806000728 > device_attach: est2 attach returned 6 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > cpu3: <ACPI CPU> on acpi0 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 728072806000728 > device_attach: est3 attach returned 6 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > acd0: DVDR <PIONEER DVD-RW DVR-111D/1.23> at ata0-master UDMA66 > Waiting 5 seconds for SCSI devices to settle > (probe46:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step > da0 at arcmsr0 bus 0 target 0 lun 0 > da0: <Areca ARC-1220-VOL#00 R001> Fixed Direct Access SCSI-5 device > da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) > da0: 77247MB (158201856 512 byte sectors: 255H 63S/T 9847C) > da1 at arcmsr0 bus 0 target 1 lun 0 > da1: <Areca ARC-1220-VOL#01 R001> Fixed Direct Access SCSI-5 device > da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) > da1: 953673MB (1953122304 512 byte sectors: 255H 63S/T 121576C) > da2 at arcmsr0 bus 0 target 2 lun 0 > da2: <Areca ARC-1220-VOL#02 R001> Fixed Direct Access SCSI-5 device > da2: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) > da2: 800131MB (1638669312 512 byte sectors: 255H 63S/T 102002C) > sa0 at ahd1 bus 0 target 6 lun 0 > sa0: <SEAGATE DAT 04106-XXX 7600> Removable Sequential Access SCSI-2 > device > sa0: 10.000MB/s transfers (10.000MHz, offset 15) > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #3 Launched! > Trying to mount root from ufs:/dev/da0s1a > This module (opensolaris) contains code covered by the > Common Development and Distribution License (CDDL) > see http://opensolaris.org/os/licensing/opensolaris_license/ > WARNING: ZFS is considered to be an experimental feature in FreeBSD. > ZFS filesystem version 6 > ZFS storage pool version 6 > em0: link state changed to UP > bge0: link state changed to UP > > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2a41acea0811250931x53e545b8qd392c56c7705104d>