Date: Tue, 20 May 2003 21:41:00 +0200 (CEST) From: Marcel de Vries <mdevries@tnt.yi.org> To: questions@freebsd.org Subject: cant recieve sensor data (intel 440 lx) fbsd4.7 Message-ID: <20030520213942.C1589@tnt.yi.org>
next in thread | raw e-mail | index | archive | help
Hi everyone, Just have a question about gathering information from my mainboard sensors. I will give the output from dmesg to see the mainboard Iam using (Intel 82443LX (440 LX) CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x633 Stepping = 3 Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX> real memory = 134217728 (131072K bytes) avail memory = 127201280 (124220K bytes) Preloaded elf kernel "kernel" at 0xc0361000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fdf50 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard. -- intpm0: <Intel 82371AB Power management controller> port 0x7000-0x700f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 7000 intpm0: intr IRQ 9 enabled revision 0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus general purpose I/O> on smbus0 -- intpm0: PM I/O mapped 8000 I installed several ports like, lmmon, chm and healthd but no realtime sensor data will be retrieved. I am sure my sensors are intact, I have cpu fan sensor, systemboard temp sensor and a cpu temp sensor. Some kernel tweaks I did: Kernel tweaks: #BUS support device smbus device smb device iicbus device iicbb device ic device iic device iicsmb device intpm device alpm device ichsmb device viapm device amdpm Im really lost here, what can I do to retrieve valid sensor output? A Snapshot that lmmon gave me: Motherboard Temp Voltages 75C / 167F / 348K Vcore1: +0.875V Vcore2: +0.328V Fan Speeds + 3.3V: +1.516V + 5.0V: +1.774V 1: 3245 rpm +12.0V: +0.250V 2: 16875rpm -12.0V: -0.000V 3: 3443 rpm - 5.0V: -2.505V Its always the same, never changes. Can somebody help me out? Installed FreeBSD 4.7-STABLE FreeBSD 4.7-STABLE #9 Kind regards, Marcel de Vries
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030520213942.C1589>