Date: Tue, 6 Feb 2007 19:08:56 +0100 From: "Stefan Moro" <moro@dtek.chalmers.se> To: freebsd-questions@freebsd.org Subject: plextor PX-760SA problem Message-ID: <2961fef0702061008g32b27d57hd5a4fced29f6b2ae@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hello!
I'm having some trouble trying to burn dvd:s using my PX-760SA under FreeBSD.
As far as I know, the DVD-burning software that is available for FBSD
uses the SCSI subsystem and therefore requires atapicam.
My problem is the following:
After Compiling the kernel with the following options
device atapicam
device ata
device scbus
device cd
device pass
The system almost hangs at startup. With almost I mean that when it
tries to recognize the cd0 device it hangs for about 5-10 minutes and
then produces the output:
cd0 at ata2 bus 0 target 1 lun 0
cd0: <PLEXTOR DVDR PX-760A 1.03> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: @
after that it hangs again.
I've also tried loading the atapicam module with kldload which
generates almost the same behavior.
After kldload I can use the system until I try kldstat or "ls /dev"
then it hangs for about 5-10 minutes. produces the output
cd0 at ata2 bus 0 target 1 lun 0
cd0: <PLEXTOR DVDR PX-760A 1.03> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: @
and then hangs again for another couple of minutes, responds to my
commands for a couple of minutes and hangs again and so on.
I tried upgrading the firmware of the PK-760SA to 1.06. Still the same problem
There is no problem using the PX-760SA without atapicam.
dmesg attached. (without atapicam in kernel)
Any help appreciated
//Stefan
[-- Attachment #2 --]
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #7: Wed Jan 17 22:52:39 CET 2007
root@moro:/usr/obj/usr/src/sys/DAKERNEL
ACPI APIC Table: <AOpen AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (2001.38-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2137915392 (2038 MB)
avail memory = 2087067648 (1990 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <AOpen AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> port 0xff00-0xff07 mem 0xfde80000-0xfdefffff,0xd0000000-0xdfffffff,0xfdf80000-0xfdfbffff irq 16 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <display> at device 2.1 (no driver attached)
pcm0: <Intel 82801G High Definition Audio Controller> mem 0xfdff8000-0xfdffbfff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0xef00-0xef1f mem 0xfdde0000-0xfddfffff irq 17 at device 0.0 on pci2
em0: Ethernet address: 00:01:80:64:ee:18
uhci0: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
fwohci0: <Lucent FW322/323> mem 0xfdaff000-0xfdafffff irq 19 at device 7.0 on pci3
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:01:80:13:94:64:ee:18
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7M SATA300 controller> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f mem 0xfdffe000-0xfdffe3ff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ichsmb0: <SMBus controller> port 0x500-0x51f irq 19 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
ad0: 381554MB <Seagate ST3400620AS 3.AAC> at ata2-master SATA150
acd0: DVDR <PLEXTOR DVDR PX-760A/1.06> at ata2-slave SATA150
pcm0: <HDA Codec: Realtek ALC882>
pcm0: <HDA Driver Revision: 20061017_0033>
SMP: AP CPU #1 Launched!
.
.
.
.
.
.
Mounting NFS file systems:
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/mplayer/vidix /usr/local/lib/mysql
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files:
.
Starting syslogd.
Initial i386 initialization:
.
Additional ABI support:
.
Starting local daemons:
.
Updating motd
.
Mounting late file systems:
.
Starting usbd.
Configuring syscons:
blanktime
.
Starting sshd.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting default moused:
.
Starting background file system checks in 60 seconds.
Tue Feb 6 18:12:56 CET 2007
drmsub0: <Intel i945GM>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xfde80000 0MB
info: [drm] Initialized i915 1.4.0 20060119
Feb 6 18:16:16 moro su: stefan to root on /dev/ttyp1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2961fef0702061008g32b27d57hd5a4fced29f6b2ae>