Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 10 Aug 2015 22:30:36 +0000
From:      Ulrich Grey <usenet@ulrich-grey.de>
To:        Ian Lepore <ian@freebsd.org>, freebsd-arm@freebsd.org
Subject:   Re: Crochet Updates for RPi, BeagleBone
Message-ID:  <20150810223036.9d5e5c9d415aba68fefb8a50@ulrich-grey.de>
In-Reply-To: <672F2D0C-BC6D-4A5F-BF3E-F3CF659636CD@kientzle.com>
References:  <486955D9-6EED-47E4-BCAA-AA66650BB9DA@kientzle.com> <55C3EA7E.7050905@blarg.com> <85E89B54-B2AA-4D87-BA80-5BD2956B2F8A@kientzle.com> <1439058129.70393.262.camel@freebsd.org> <8C0A45D4-38F0-4099-84AE-D904B8614604@kientzle.com> <1439087009.70393.274.camel@freebsd.org> <672F2D0C-BC6D-4A5F-BF3E-F3CF659636CD@kientzle.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 9 Aug 2015 11:32:00 -0700
Tim Kientzle <tim@kientzle.com> wrote:

> 
> > On Aug 8, 2015, at 7:23 PM, Ian Lepore <ian@freebsd.org> wrote:
> > 
> > On Sat, 2015-08-08 at 12:01 -0700, Tim Kientzle wrote:
> >>> On Aug 8, 2015, at 11:22 AM, Ian Lepore <ian@freebsd.org> wrote:
> >>> 
> >>> On Sat, 2015-08-08 at 10:52 -0700, Tim Kientzle wrote:
> >>>>> On Aug 6, 2015, at 4:15 PM, kah42pub <kah42pub@blarg.com> wrote:
> >>>>> 
> >>>>> On 7/19/15 18:39, Tim Kientzle wrote:
> >>>>>> I just committed changes to Crochet so that it now uses the U-Boot ports for RPi
> >>>>>> and BeagleBone (including BBB).  It already used the port for RPi2.
> >>>>> 
> >>>>> Has anyone successfully built the u-boot-rpi port recently for RPI-B?
> >>>> 
> >>>> I just tried building each U-Boot port with an upgraded -CURRENT system (including
> >>>> packages).  Looks like anything based on U-Boot older than 2015.04 is broken:
> >>>> 
> >>>> The following did not build for me:
> >>>>  u-boot-beaglebone (uses U-Boot 2014.10)
> >>>>  u-boot-cubox-hummingbird (based on U-Boot 2013.10)
> >>>>  u-boot-duovero (based on U-Boot 2014.10)
> >>>>  u-boot-pandaboard (uses U-Boot 2014.10)
> >>>>  u-boot-rpi  (based on U-Boot 2013.01)
> >>>>  u-boot-wandboard (based on U-Boot 2013.10)
> >>>> 
> >>>> These did build:
> >>>>  u-boot-bananapi (uses U-Boot 2015.04)
> >>>>  u-boot-cubieboard (uses U-Boot 2015.04)
> >>>>  u-boot-cubieboard2 (uses U-Boot 2015.04)
> >>>>  u-boot-rpi2 (uses U-boot 2015.04)
> >>> 
> >>> The cross-compiler port used for u-boot got upgraded behind our backs to
> >>> gcc5, and that breaks all the u-boots that are based on older
> >>> vendor-supplied sources.  I have a new arm-none-eabi-gcc492 port ready
> >>> to go, but I'm not a ports committer, so I'm waiting for someone to
> >>> review and approve the commit.
> >> 
> >> Great!
> >> 
> >> Keeping old GCC versions available in the ports tree sounds like a
> >> good plan in general.
> >> 
> >>> I also plan to try and get as many of our u-boot ports as possible
> >>> updated to the latest mainline u-boot sources, but I still want to get
> >>> the gcc492 port in first because I think updating to mainline u-boot is
> >>> more than a day or two of work.
> >> 
> >> Thanks for your work on this.
> >> 
> >> Cheers,
> >> 
> >> Tim
> > 
> > I just committed the fixes for all the u-boot ports on your 'did not
> > build' list.  I also snuck in the fix for the cubox-hummingboard port to
> > make the board detection work, and it should choose the right fdt file
> > now for hummingboard users.
> 
> After updating my ports tree, I was able to build every U-Boot port on an up-to-date
> -CURRENT system.

After updating the ports tree I can not build devel/arm-none-eabi-gcc492 in a changeroot.

gcc.o:(.rodata+0x88c): undefined reference to `host_detect_local_cpu(int, char const**)'
c++: error: linker command failed with exit code 1 (use -v to see invocation)
Makefile:1805: recipe for target 'xgcc' failed
gmake[2]: *** [xgcc] Error 1
gmake[2]: *** Waiting for unfinished jobs....
214 warnings generated.
3 warnings generated.
11 warnings generated.
rm gcc.pod
gmake[2]: Leaving directory '/usr/ports/devel/arm-none-eabi-gcc492/work/build-gcc/gcc'
Makefile:3967: recipe for target 'all-gcc' failed
gmake[1]: *** [all-gcc] Error 2
gmake[1]: Leaving directory '/usr/ports/devel/arm-none-eabi-gcc492/work/build-gcc'
===> Compilation failed unexpectedly.
Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to
the maintainer.
*** Error code 1

Stop.
make: stopped in /usr/ports/devel/arm-none-eabi-gcc492

===>>> make build failed for devel/arm-none-eabi-gcc492
===>>> Aborting update
______________________________________________
> freebsd-arm@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150810223036.9d5e5c9d415aba68fefb8a50>