From owner-freebsd-questions  Tue Jun 20 11:29:58 2000
Delivered-To: freebsd-questions@freebsd.org
Received: from mail.telestream.com (mail.telestream.com [205.238.4.5])
	by hub.freebsd.org (Postfix) with ESMTP id 1ABE237B829
	for <freebsd-questions@FreeBSD.ORG>; Tue, 20 Jun 2000 11:29:55 -0700 (PDT)
	(envelope-from keith@mail.telestream.com)
Received: from localhost (keith@localhost)
	by mail.telestream.com (8.9.3/8.9.3) with ESMTP id LAA08323;
	Tue, 20 Jun 2000 11:29:48 -0700
Date: Tue, 20 Jun 2000 11:29:48 -0700 (PDT)
From: <keith@mail.telestream.com>
To: Kenneth Wayne Culver <culverk@wam.umd.edu>
Cc: freebsd-questions@FreeBSD.ORG
Subject: Re: Sound config
In-Reply-To: <Pine.GSO.4.21.0006201412590.21567-100000@rac10.wam.umd.edu>
Message-ID: <Pine.LNX.4.10.10006201123270.8192-100000@mail.telestream.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-questions@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

Here is where it stands as of now.
I've put this into the kernel and it seems to come up ok

# For non-pnp sound cards with no bridge drivers only:
device          pcm0 at isa? irq 5 drq 1 flags 0x0
#
# For PnP/PCI sound cards
device          pcm
device          sbc0    at isa? port 0x220 irq 5 drq 1 flags 0x15

Things seem to get detected just fine but when I go and try to fire up
xcdplayer I get just a screen full of 
open: : Device not configured

wmcdplay errors with.....
wmcdplay : Unable to open cdrom device '/dev/cdrom'.


Is this something as simple as doing a MAKEDEV on one thing or another?


Keith

=================================
Keith W.

At the helm <for better or worse>
=================================


On Tue, 20 Jun 2000, Kenneth Wayne Culver wrote:

> add pcm0 and sbc0, if the card is supported it will detect the card and it
> will work :-) (if it's not PnP, you may have to add some info about io
> port ranges and irq's and what not.. but it'll work) it should be in this
> form:
> 
> device pcm
> device sbc
> 
> check /usr/src/sys/i386/conf/LINT for the exact format of the lines if you
> have a non-PnP card. My ViBRA16x works fine though so I think your's
> should work :-) (PS, how's work goin?)
> 
> 
> =================================================================
> | Kenneth Culver              | FreeBSD: The best NT upgrade    |
> | Unix Systems Administrator  | ICQ #: 24767726                 |
> | and student at The          | AIM: muythaibxr                 |
> | The University of Maryland, | Website: (Under Construction)   |
> | College Park.	              | http://www.wam.umd.edu/~culverk/|
> =================================================================
> 
> On Tue, 20 Jun 2000 keith@mail.telestream.com wrote:
> 
> > I've got a sound blaster ISA that I would like to use on my workstation
> > but am having a hard time determining what features to put into the
> > kernel. Any hints on this would be great. 
> > 
> > INFO:
> > 
> > FreeBSD 4.0-Stable
> > Soundblaster Model CT4170
> > Vibra 16xv chip
> > 
> > On boot of the machine here is what the boot prompt gives as info for the
> > card
> > 
> > Card    Device   DMA    IRQ
> > -----   ------   ---    ---
> > 1          0     1,3     5
> > 
> > 
> > Thanks.
> > Keith
> > 
> > 
> > =================================
> > Keith W.
> > 
> > At the helm <for better or worse>
> > =================================
> > 
> > 
> > 
> > 
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-questions" in the body of the message
> > 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message