Date: Fri, 28 Jun 2013 11:10:01 GMT From: Hans Petter Selasky <hps@bitfrost.no> To: freebsd-usb@FreeBSD.org Subject: Re: usb/179505: Kernel detaches Arduino Leonardo (and similar) board umodem after the arduino boots Message-ID: <201306281110.r5SBA1KE083819@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR usb/179505; it has been noted by GNATS. From: Hans Petter Selasky <hps@bitfrost.no> To: Hans Petter Selasky <hps@bitfrost.no> Cc: joerg@FreeBSD.org, freebsd-gnats-submit@FreeBSD.org Subject: Re: usb/179505: Kernel detaches Arduino Leonardo (and similar) board umodem after the arduino boots Date: Fri, 28 Jun 2013 13:09:07 +0200 This is a multi-part message in MIME format. --------------020401000108020403000905 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit On 06/28/13 11:10, Hans Petter Selasky wrote: > The following reply was made to PR usb/179505; it has been noted by GNATS. > > From: Hans Petter Selasky <hps@bitfrost.no> > To: Mike Meyer <mwm@mired.org> > Cc: freebsd-gnats-submit@FreeBSD.org > Subject: Re: usb/179505: Kernel detaches Arduino Leonardo (and similar) board > umodem after the arduino boots > Date: Fri, 28 Jun 2013 11:09:07 +0200 > > Hi Mike, > > I was not able to reproduce this issue yet. From the logs you sent I see: > > That the INTERRUPT endpoint is stalling: > > DONE-INTR-EP=00000084,SPD=FULL,NFR=1,SLEN=0,IVAL=1,ERR=STALLED > > Then the USB stack will try to clear the stall. And the clearing of > stall also fails: > > DONE-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=0,IVAL=0,ERR=STALLED > > These messages are mandatory to implement per usb.org specifications. > And I know Linux and Windows does not use these very much. In other > words I looks like the Arduino could need some more USB certification! > > After a given amount of stalling, the FreeBSD USB stack will reset the > device, which gives you the re-enumeration you are observing. > > This case can be prevented by setting: > > sysctl hw.usb.no_cs_fail=1 > > Then try again! > > --HPS > _______________________________________________ > freebsd-usb@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-usb > To unsubscribe, send any mail to "freebsd-usb-unsubscribe@freebsd.org" > > Hi, To get the Arduino Uno working, you need the following patch, due to what most likely looks like timing differences between Linux and FreeBSD! Joerg: Can you handle this patch for /usr/ports/devel/avrdude ? --HPS --------------020401000108020403000905 Content-Type: text/x-patch; name="stk500.c.diff" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="stk500.c.diff" --- stk500.c.orig 2013-06-28 13:00:11.000000000 +0200 +++ stk500.c 2013-06-28 13:01:13.000000000 +0200 @@ -91,10 +91,11 @@ /* * First send and drain a few times to get rid of line noise */ - - stk500_send(pgm, buf, 2); - stk500_drain(pgm, 0); - stk500_send(pgm, buf, 2); + + /* + * XXX The Arduino only sends the sync sequence once after modem open. + * XXX Only drain once! + */ stk500_drain(pgm, 0); stk500_send(pgm, buf, 2); --------------020401000108020403000905--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201306281110.r5SBA1KE083819>