Date: Wed, 09 Jul 2008 20:52:59 -0400 From: Mike Tancsa <mike@sentex.net> To: netperf-admins@freebsd.org Cc: netperf-users@freebsd.org Subject: netperf 10gige switch back online! Message-ID: <200807100053.m6A0r1Aq033423@lava.sentex.ca>
next in thread | raw e-mail | index | archive | help
Good news everyone!
Cisco sent the replacement part this morning and I was able
to install the sup module and boot up the switch. I then put in the
new blade with 4 new 10gigE ports and plugged in the 5th card. The
port assignment now looks like
giga-x#show int status
Port Name Status Vlan Duplex Speed Type
Gi1/1 disabled 1 full 1000 No
Transceiver
Gi1/2 xover to zoo connected routed a-full a-1000
10/100/1000BaseT
Te2/1 "hydra1 cxgb0" connected 10 full 10G 10Gbase-CX4
Te2/2 "leopard2 mxge0" connected 10 full 10G 10Gbase-CX4
Te2/3 "leopard1 cxgb0" connected 10 full 10G 10Gbase-CX4
Te2/4 "hydra2 intel" connected 10 full 10G 10Gbase-SR
Te3/1 "leopard3 mxge0" connected 10 full 10G 10Gbase-CX4
Te3/2 notconnect 10 full 10G 10Gbase-CX4
Te3/3 notconnect 10 full 10G 10Gbase-CX4
Te3/4 notconnect 10 full 10G 10Gbase-CX4
giga-x#
So there is room for 3 more cards. We have some PCI-X cards but I
forget what they are. The only other "highish" end boxes are bear1
(quad core, pci-e, not pci-x) and camel (pci-x), which pjd does a lot
of zfs work on.
giga-x#show modul
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 Supervisor Engine 720
(Active) WS-SUP720-BASE SAD0742012J
2 4 CEF720 4 port 10-Gigabit
Ethernet WS-X6704-10GE SAL104575BL
3 4 CEF720 4 port 10-Gigabit
Ethernet WS-X6704-10GE SAL1222S8JJ
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 000d.290f.e690 to 000d.290f.e693 2.8 8.4(2) 12.2(18)SXD7 Ok
2 0018.bab0.2034 to 0018.bab0.2037 2.5 12.2(14r)S5 12.2(18)SXD7 Ok
3 001f.cac6.da98 to 001f.cac6.da9b 2.7 12.2(14r)S5 12.2(18)SXD7 Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ ------------ ------- -------
1 Policy Feature Card 3 WS-F6K-PFC3A SAD074105D8 1.4 Ok
1 MSFC3 Daughterboard WS-SUP720 SAD074203BF 1.11 Ok
2 Centralized Forwarding Card WS-F6700-CFC SAL1049A4P4 2.1 Ok
3 Centralized Forwarding Card WS-F6700-CFC SAL1222RZ83 4.0 Ok
Mod Online Diag Status
--- -------------------
1 Pass
2 Pass
3 Pass
giga-x#
Other details below!
giga-x#show inv
NAME: "WS-C6503-E", DESCR: "Cisco Systems Catalyst 6500 3-slot Chassis System"
PID: WS-C6503-E , VID: V02, SN: FOX1038071Z
NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1"
PID: CLK-7600 , VID: , SN: NWG1038041T
NAME: "CLK-7600 2", DESCR: "OSR-7600 Clock FRU 2"
PID: CLK-7600 , VID: , SN: NWG1038041T
NAME: "1", DESCR: "WS-SUP720-BASE 2 ports Supervisor Engine 720 Rev. 2.8"
PID: WS-SUP720-BASE , VID: , SN: SAD0742012J
NAME: "msfc sub-module of 1", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 1.11"
PID: WS-SUP720 , VID: , SN: SAD074203BF
NAME: "switching engine sub-module of 1", DESCR: "WS-F6K-PFC3A Policy
Feature Card 3 Rev. 1.4"
PID: WS-F6K-PFC3A , VID: , SN: SAD074105D8
NAME: "2", DESCR: "WS-X6704-10GE CEF720 4 port 10-Gigabit Ethernet Rev. 2.5"
PID: WS-X6704-10GE , VID: V02, SN: SAL104575BL
NAME: "Te2/1", DESCR: "10Gbase-CX4"
PID: ECX-7700-XEN-P4 , VID: , SN: EMC10479070
NAME: "Te2/2", DESCR: "10Gbase-CX4"
PID: ECX-7700-XEN-P4 , VID: , SN: EMC10479348
NAME: "Te2/3", DESCR: "10Gbase-CX4"
PID: TREC010EN-BWC , VID: , SN: OSA111000DQ
NAME: "Te2/4", DESCR: "10Gbase-SR"
PID: TXN174310850F1A , VID: , SN: IJM1113M0BZ
NAME: "switching engine sub-module of 2", DESCR: "WS-F6700-CFC
Centralized Forwarding Card Rev. 2.1"
PID: WS-F6700-CFC , VID: V03, SN: SAL1049A4P4
NAME: "3", DESCR: "WS-X6704-10GE CEF720 4 port 10-Gigabit Ethernet Rev. 2.7"
PID: WS-X6704-10GE , VID: V02, SN: SAL1222S8JJ
NAME: "Te3/1", DESCR: "10Gbase-CX4"
PID: ECX-7700-XEN-P4 , VID: , SN: EMB12159162
NAME: "Te3/2", DESCR: "10Gbase-CX4"
PID: ECX-7700-XEN-P4 , VID: , SN: EMB12159132
NAME: "Te3/3", DESCR: "10Gbase-CX4"
PID: ECX-7700-XEN-P4 , VID: , SN: EMB12159348
NAME: "Te3/4", DESCR: "10Gbase-CX4"
PID: ECX-7700-XEN-P4 , VID: , SN: EMB12159142
NAME: "switching engine sub-module of 3", DESCR: "WS-F6700-CFC
Centralized Forwarding Card Rev. 4.0"
PID: WS-F6700-CFC , VID: V05, SN: SAL1222RZ83
NAME: "WS-C6503-E-FAN 1", DESCR: "Enhanced 3-slot Fan Tray 1"
PID: WS-C6503-E-FAN , VID: V02, SN: DCH10411759
NAME: "PS 1 PWR-1400-AC", DESCR: "AC power supply, 1400 watt 1"
PID: PWR-1400-AC , VID: V02, SN: DTH1041J004
giga-x#show run
Building configuration...
Current configuration : 3075 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
service counters max age 10
!
hostname giga-x
!
boot system flash bootflash:s72033-psv-mz.122-18.SXD7b.bin
logging buffered informational
enable secret 5 $1$5Fof$JJxVroRh05l76mhiB53L1.
enable password 7 150804030F2F2E342D21
!
no aaa new-model
ip subnet-zero
!
!
no ip domain-lookup
!
mls ip multicast flow-stat-timer 9
no mls flow ip
no mls flow ipv6
mls cef error action freeze
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
diagnostic cns publish cisco.cns.device.diag_results
diagnostic cns subscribe cisco.cns.device.diag_commands
!
redundancy
mode sso
main-cpu
auto-sync running-config
!
vlan internal allocation policy ascending
vlan access-log ratelimit 2000
!
!
interface GigabitEthernet1/1
no ip address
shutdown
!
interface GigabitEthernet1/2
description xover to zoo
ip address 192.168.5.95 255.255.255.0
media-type rj45
!
interface TenGigabitEthernet2/1
description "hydra1 cxgb0"
mtu 9216
no ip address
logging event link-status
logging event spanning-tree status
logging event trunk-status
switchport
switchport access vlan 10
switchport mode access
spanning-tree portfast
!
interface TenGigabitEthernet2/2
description "leopard2 mxge0"
mtu 9216
no ip address
logging event link-status
switchport
switchport access vlan 10
spanning-tree portfast
!
interface TenGigabitEthernet2/3
description "leopard1 cxgb0"
mtu 9216
no ip address
logging event link-status
switchport
switchport access vlan 10
spanning-tree portfast
!
interface TenGigabitEthernet2/4
description "hydra2 intel"
mtu 9216
no ip address
logging event link-status
switchport
switchport access vlan 10
spanning-tree portfast
!
interface TenGigabitEthernet3/1
description "leopard3 mxge0"
mtu 9216
no ip address
logging event link-status
switchport
switchport access vlan 10
spanning-tree portfast
!
interface TenGigabitEthernet3/2
mtu 9216
no ip address
logging event link-status
switchport
switchport access vlan 10
spanning-tree portfast
!
interface TenGigabitEthernet3/3
mtu 9216
no ip address
logging event link-status
switchport
switchport access vlan 10
spanning-tree portfast
!
interface TenGigabitEthernet3/4
mtu 9216
no ip address
logging event link-status
switchport
switchport access vlan 10
spanning-tree portfast
!
interface Vlan1
no ip address
shutdown
!
interface Vlan10
description "big switch"
no ip address
!
interface Vlan11
description vl11
no ip address
shutdown
!
ip classless
no ip http server
!
!
!
logging facility local5
logging source-interface GigabitEthernet1/2
logging 192.168.5.1
!
snmp-server community public RO
!
!
control-plane
!
!
banner login ^CCCC
************************************************
password is zookeeper
enable is zookeeper
************************************************
^C
!
line con 0
line vty 0 4
password 7 1113160A1C170E1C0138
no login
line vty 5 15
password 7 1113160A1C170E1C0138
no login
!
end
giga-x#
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200807100053.m6A0r1Aq033423>