Date: Mon, 11 Sep 2006 11:42:03 GMT From: Andrew "squirL" Tovstik <sql82@list.ru> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/103132: update of Asus A8V-MX description Message-ID: <200609111142.k8BBg39P057207@www.freebsd.org> Resent-Message-ID: <200609111150.k8BBo9UF071278@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 103132
>Category: amd64
>Synopsis: update of Asus A8V-MX description
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-amd64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Sep 11 11:50:08 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Andrew "squirL" Tovstik
>Release: FreeBSD 6.1-Release
>Organization:
>Environment:
FreeBSD squirlhome.ilyichevsk.net 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Thu Jul 13 16:42:09 EEST 2006 squirl@squirlhome.ilyichevsk.net:/usr/src/sys/amd64/compile/CUSTOM13072006 amd64
>Description:
Experience with FreeBSD 6.1-RELEASE amd64 on ASUS A8V-MX:
ACPI 2.0 is enabled BIOS
APIC APIC Support is enabled in BIOS
SATA II WDC WD2500JS-55MHB gets recognized as SATA-150. Serial ATA IDE Controller mode in BIOS set in "SATA" (RAID and AHCI also avaliable)
Onboard sound and network adapter works fine
dmesg output:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Thu Jul 13 16:42:09 EEST 2006
squirl@squirlhome.ilyichevsk.net:/usr/src/sys/amd64/compile/CUSTOM13072006
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1800.08-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
AMD Features2=0x1<LAHF>
real memory = 1073414144 (1023 MB)
avail memory = 1027690496 (980 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 8251 SATA150 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfebffc00-0xfebfffff irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8251 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xe080-0xe09f irq 20 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 22 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xd880-0xd89f irq 23 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 22 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8251> port 0xd400-0xd4ff irq 22 at device 17.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem 0xfebff400-0xfebff4ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:13:d4:c6:67:e9
pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.1 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci5: <ACPI PCI bus> on pcib5
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1800079291 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <NEC DVD RW ND-3550A/1.05> at ata0-master UDMA33
ad4: 238475MB <WDC WD2500JS-55MHB0 02.01C03> at ata2-master SATA150
da0 at umass-sim0 bus 0 target 0 lun 0
da0: < PUSB20MFD1024LG 1.0> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-3550A 1.05> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s3a
vr0: link state changed to DOWN
vr0: link state changed to UP
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200609111142.k8BBg39P057207>