Date: Sat, 17 Apr 2004 18:39:16 -0700 (PDT) From: brandon orcutt <brandon@hebowear.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/65691: fxp0: device timeout Message-ID: <200404180139.i3I1dGcN084672@www.freebsd.org> Resent-Message-ID: <200404180140.i3I1eHdo057750@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 65691
>Category: i386
>Synopsis: fxp0: device timeout
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Apr 17 18:40:17 PDT 2004
>Closed-Date:
>Last-Modified:
>Originator: brandon orcutt
>Release: 4.8-release
>Organization:
hebowear
>Environment:
FreeBSD diablo.hebowear.com 4.8-RELEASE FreeBSD 4.8-RELEASE #1: Sat Apr 17 17:33:42 PDT 2004 lorddrunk@diablo.hebowear.com:/usr/src/sys/compile/DIABLO i386
>Description:
system hangs with "fxp0: device timeout" no keyboard input, net traffic, etc.
diablo# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #1: Sat Apr 17 17:33:42 PDT 2004
lorddrunk@diablo.hebowear.com:/usr/src/sys/compile/DIABLO
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (598.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 335478784 (327616K bytes)
avail memory = 320729088 (313212K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc052c000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdf40
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1060-0x107f mem 0xfa000000-0xfa0fffff,0xfa204000-0xfa204fff irq 11 at device 11.0 on pci0
fxp0: Ethernet address 00:a0:c9:af:b7:fb
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0x1400-0x14ff mem 0xfa200000-0xfa200fff,0xfa203000-0xfa2030ff irq 11 at device 13.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x1800-0x18ff mem 0xfa201000-0xfa201fff,0xfa203400-0xfa2034ff irq 11 at device 13.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x1080-0x109f mem 0xfa100000-0xfa1fffff,0xfa205000-0xfa205fff irq 11 at device 15.0 on pci0
fxp1: Ethernet address 00:90:27:73:94:01
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 18.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x10a0-0x10bf irq 11 at device 18.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 18.3 on pci0
pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcc7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
(probe4:sym0:0:4:0): phase change 6-7 6@041bd18c resid=4.
pass2 at sym0 bus 0 target 4 lun 0
pass2: <TOSHIBA SMC2.1 A02> Fixed Processor SCSI-2 device
pass2: 3.300MB/s transfers
Mounting root from ufs:/dev/da0s1a
cd0 at sym1 bus 0 target 6 lun 0
cd0: <YAMAHA CRW6416S 1.0b> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM DNES-309170Y SA30> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
da1 at sym0 bus 0 target 1 lun 0
da1: <IBM DNES-309170Y SA30> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da1: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
>How-To-Repeat:
usually occurs during large transfers over local area. (eg. tar -zxvf foo.tar.gz on large files 6mb+ thru ssh).
>Fix:
i wish.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200404180139.i3I1dGcN084672>