From owner-freebsd-scsi Thu Sep 16 9: 5:28 1999 Delivered-To: freebsd-scsi@freebsd.org Received: from mocha.baileylink.net (mocha.baileylink.net [63.71.213.4]) by hub.freebsd.org (Postfix) with ESMTP id 45D3B15007 for ; Thu, 16 Sep 1999 09:05:25 -0700 (PDT) (envelope-from brad@baileylink.net) Received: from togo (dhcp51.javabit.com [63.71.213.51]) by mocha.baileylink.net (Netscape Mail Server v2.02) with SMTP id AAA20818 for ; Thu, 16 Sep 1999 11:04:02 -0500 From: brad@baileylink.net To: Subject: RE: tandberg ns8 with on-board adaptec AIC-7890 Date: Thu, 16 Sep 1999 10:58:06 -0500 Message-ID: <000201bf005c$43cf17e0$33d5473f@togo.javabit.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <19990916130936.39256.qmail@hotmail.com> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Probably not. If I read correctly you use one SCSI bus. Every SCSI bus should have 2 terminators, one on each end. I believe that the motherboard controller will terminate one end automatically. It is advisable to either terminate the last device and place it at the end of the cable or to use and external (preferably active) terminator. On a side note, I have heard that one would only need one terminator for busses with cable length of less than 18 inches, personally I always use two. BMG p.s. Please go easy on me if this is not exactly correct, SCSI busses have changed a lot over the years. -----Original Message----- From: owner-freebsd-scsi@FreeBSD.ORG [mailto:owner-freebsd-scsi@FreeBSD.ORG]On Behalf Of Giorgio Bozio Sent: Thursday, September 16, 1999 8:10 AM To: up@3.am; webgio@hotmail.com Cc: freebsd-scsi@freebsd.org Subject: Re: tandberg ns8 with on-board adaptec AIC-7890 tape and disk are both terminated, is this correct? > > >Having gone though this myself recently...have a look at your termination. > >On Thu, 16 Sep 1999, Giorgio Bozio wrote: > > > I'm trying to install a tandberg tape ns8 (fast-Scsi) on a pc with a >asus > > P2B-S motherboard that has a on-board adaptec AIC-7890. The motherboard >has > > a quantum vicking II on (Ultra2 scsi) and has always worked fine. HD is >on > > ID 0 and tape on ID 4. The problem I encountered is that approx. 1 out >of 3 > > boots (and reboots) the system hangs at the point when it says "waiting >15 > > seconds for scsi devices to settle". I wonder if changing the scsi_delay > > setting in the kernel config and raising it would do any help. > > Please help! > > thank you, > > Giorgio Bozio > > ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message