Date: Sat, 22 Feb 1997 00:53:33 -0800 (PST) From: Morgan Davis <mdavis@io.cts.com> To: stable@freebsd.org Subject: Random dives out of make world Message-ID: <199702220853.AAA21597@io.cts.com>
next in thread | raw e-mail | index | archive | help
What might cause a system with the latest -stable sources to bomb out
of a "make world" at random places with "internal compiler error:
signal 11" and other such errors? This system is a freshly installed
2.1.6 which has the -stable branch via cvsup. It is lightly used,
only for telnetting out at this point, so no other crashing. I
managed to get it up to 2.1.7 by continual "make all install" attempts
until in /usr/src it finally completed. But even after 2.1.7, I still
get:
pid 23979 (cc1), uid 0: exited on signal 11
Here's a dmesg if this helps pinpoint a trouble spot I should focus
on. Would a kernel config file help, too? (based on generic -- it's
all rather vanilla).
Thanks for any assistance.
--Morgan
----- Forwarded message from Morgan Davis -----
>From mdavis@freek.cts.com Wed Feb 19 00:01:03 1997
Date: Wed, 19 Feb 1997 00:00:53 -0800 (PST)
From: Morgan Davis <mdavis@freek.cts.com>
Message-Id: <199702190800.AAA23996@freek.cts.com>
To: mdavis@io.cts.com
FreeBSD 2.1.7-RELEASE #0: Fri Feb 14 15:54:55 PST 1997
mdavis@freek.cts.com:/usr/src/sys/compile/FREEK
CPU: 120-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 62996480 (61520K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437FX PCI cache memory controller> rev 1 on pci0:0
chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0
chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1
de0 <Digital DC21140 Fast Ethernet> rev 18 int a irq 12 on pci0:9
de0: SMC 9332 DC21140 [10-100Mb/s] pass 1.2
de0: address 00:00:c0:b5:51:dc
de0: enabling 10baseT port
de1 <Digital DC21140 Fast Ethernet> rev 18 int a irq 10 on pci0:10
de1: SMC 9332 DC21140 [10-100Mb/s] pass 1.2
de1: address 00:00:c0:ad:51:dc
de1: enabling 10baseT port
bt0 <Buslogic 946 SCSI host adapter> rev 0 int a irq 11 on pci0:11
bt0: Bt946C/ 0-(32bit) bus
bt0: reading board settings, busmastering, int=11
bt0: version 4.25J, fast sync, parity, 32 mbxs, 32 ccbs
bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 1 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 2 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 6 sync rate= 5.00MB/s(200ns), offset=08
bt0: Using Strict Round robin scheme
bt0 waiting for scsi devices to settle
(bt0:0:0): "SEAGATE ST32430N 0300" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 2049MB (4197405 512 byte sectors)
(bt0:1:0): "SEAGATE ST32430N 0300" type 0 fixed SCSI 2
sd1(bt0:1:0): Direct-Access 2049MB (4197405 512 byte sectors)
(bt0:2:0): "SEAGATE ST32430N 0510" type 0 fixed SCSI 2
sd2(bt0:2:0): Direct-Access 2049MB (4197405 512 byte sectors)
(bt0:6:0): "SONY SDT-5200 3.26" type 1 removable SCSI 2
st0(bt0:6:0): Sequential-Access density code 0x13, drive empty
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
bt: unit number (1) too high
bt1 not found at 0x330
npx0 on motherboard
npx0: INT 16 interface
pid 16220 (cc1), uid 0: exited on signal 11
pid 20490 (cc1), uid 0: exited on signal 11
pid 23979 (cc1), uid 0: exited on signal 11
----- End of forwarded message from Morgan Davis -----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199702220853.AAA21597>