From owner-cvs-all Sat Jul 29 2:23:58 2000 Delivered-To: cvs-all@freebsd.org Received: from zibbi.mikom.csir.co.za (zibbi.mikom.csir.co.za [146.64.24.58]) by hub.freebsd.org (Postfix) with ESMTP id 0AB6D37B811; Sat, 29 Jul 2000 02:23:37 -0700 (PDT) (envelope-from jhay@zibbi.mikom.csir.co.za) Received: (from jhay@localhost) by zibbi.mikom.csir.co.za (8.10.1/8.10.1) id e6T9Mqc78590; Sat, 29 Jul 2000 11:22:52 +0200 (SAT) From: John Hay Message-Id: <200007290922.e6T9Mqc78590@zibbi.mikom.csir.co.za> Subject: Re: cvs commit: src/release/scripts dokern.sh In-Reply-To: <200007282048.NAA49823@netplex.com.au> from Peter Wemm at "Jul 28, 2000 01:48:11 pm" To: peter@netplex.com.au (Peter Wemm) Date: Sat, 29 Jul 2000 11:22:52 +0200 (SAT) Cc: groudier@club-internet.fr, cvs-committers@freebsd.org, cvs-all@freebsd.org X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-cvs-all@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > > * Remove the `ncr' driver in the Alpha case -- the `sym' driver works with > > every known Alpha. > > I think it is time to switch -current to sym-only. No disrespect towards the > ncr driver writer intended, but the sym driver is well maintained, robust, > up-to-date, not implicated in the recurring fxp+ncr bugs, and supports all > the hardware. It does not support all hardware yet. I have an old 810 card that don't even want to boot using the sym driver. It just go into a loop of printing errors at the stage where it should probe the disks. The same machine works just fine with the ncr driver. John -- John Hay -- John.Hay@icomtek.csir.co.za Console: serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS drive D: is disk2 BIOS 639kB/31744kB available memory FreeBSD/i386 bootstrap loader, Revision 0.8 (jhay@angel.cids.org.za, Sun Jul 16 17:19:03 SAST 2000) Loading /boot/defaults/loader.conf /kernel text=0x152b2a data=0x1f864+0x20af4 syms=[0x4+0x24150+0x4+0x29aea] - Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 8 seconds... Type '?' for a list of commands, 'help' for more detailed help. ok boot -v SMAP type=01 base=00000000 00000000 len=00000000 0009fc00 SMAP type=01 base=00000000 0009fc00 len=00000000 00000400 SMAP type=02 base=00000000 000f0000 len=00000000 00010000 SMAP type=01 base=00000000 00100000 len=00000000 01f00000 SMAP type=02 base=00000000 fec00000 len=00000000 00001000 SMAP type=02 base=00000000 fee00000 len=00000000 00001000 SMAP type=02 base=00000000 ffff0000 len=00000000 00010000 Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #2: Sat Jul 29 09:04:15 SAST 2000 jhay@angel.cids.org.za:/usr/src/sys/compile/TOBY Calibrating clock(s) ... TSC clock: 89997030 Hz, i8254 clock: 1193144 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 80678965 Hz CPU: Pentium/P54C (80.68-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping = 5 Features=0x3bf real memory = 33554432 (32768K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x002fc000 - 0x01ff7fff, 30392320 bytes (7420 pages) avail memory = 29954048 (29252K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fa520 bios32: Entry = 0xfa850 (c00fa850) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xa880 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc02e3000. Intel Pentium detected, installing workaround for F00F bug mem: random: nulldev: npx0: on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 59435364 bytes/sec bzero() bandwidth = 29901623 bytes/sec pcib0: on motherboard found-> vendor=0x8086, dev=0x04a3, revid=0x11 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x0482, revid=0x04 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x5333, dev=0x88f0, revid=0x00 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base f0000000, size 25, enabled found-> vendor=0x1000, dev=0x0001, revid=0x01 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 4, range 32, base 00006000, size 8, enabled map[14]: type 1, range 32, base f2000000, size 8, enabled pci0: on pcib0 pci0: (vendor=0x8086, dev=0x04a3) at 0.0 isab0: at device 2.0 on pci0 eisa0: on isab0 mainboard0: on eisa0 slot 0 isa0: on isab0 pci0: (vendor=0x5333, dev=0x88f0) at 3.0 irq 11 sym0: <810> port 0x6000-0x60ff mem 0xf2000000-0xf20000ff irq 12 at device 4.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc-: sc0 exists, using next available unit number vga-: vga0 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 04 b0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff atkbd: the current kbd controller command byte 0045 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd: keyboard ID 0xffffffff (1) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 ata0: mask=00 status0=ff status1=ff ata0: probe allocation failed ata0 failed to probe at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 psm0: current command byte:0045 kbdc: TEST_AUX_PORT status:0001 psm0: strange result for test aux port (1). kbdc: RESET_AUX return code:ffffffff kbdc: RESET_AUX return code:ffffffff kbdc: RESET_AUX return code:ffffffff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. ed0 at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 5 on isa0 bpf: ed0 attached ed0: address 00:00:c0:d3:de:d6, type SMC8216/SMC8216C (16 bit) fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 gusc0 failed to probe at port 0x220 irq 5 drq 1 flags 0x13 on isa0 ppc0: parallel port found at 0x378 ppc0: This ppc chipset does not support the extended I/O port range...no problem ppc0: SPP ppc0: at port 0x378-0x37b irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 bpf: lp0 attached sc1: no video adapter is found. sc1: failed to probe on isa0 sio0: irq maps: 0x1041 0x1051 0x1041 0x1041 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16450, console sio1: irq maps: 0x1041 0x1049 0x1041 0x1041 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16450 vga1: failed to probe on isa0 isa_probe_children: probing PnP devices sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. sym0:0: ERROR (c0:0) (8-0-0) (0/3) @ (scripta 170:720d0000). sym0: script cmd = 808cfd02 sym0: regdump: ca 00 00 03 47 00 00 1f 00 08 00 00 80 00 0f 02 00 f0 f3 01 20 ff ff ff. sym0: PCI STATUS = 0x8100 (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe cvs-all" in the body of the message