Date: Fri, 16 Jun 2006 16:24:59 +0200 From: SebastienB <sebastien.bourdeauducq@gmail.com> To: Ian Dowse <iedowse@iedowse.com>, freebsd-usb@freebsd.org Subject: Re: eagleflash problem on 6.x Message-ID: <200606161625.00394.sebastien.bourdeauducq@gmail.com> In-Reply-To: <200606041351.aa22176@nowhere.iedowse.com> References: <200606041351.aa22176@nowhere.iedowse.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary-00=_88rkENcGEBGcY3b Content-Type: text/plain; charset="iso-8859-6" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hello, > Could you provide a full dmesg output including the messages when > the modem is attached? You can also compile a kernel with USB_DEBUG > and turn up the hw.usb sysctls to get more information. Here you are. I have set hw.usb.debug and hw.usb.uhci.debug to 1 (the modem is USB1). Unfortunately, I don't have access to a computer with an OHCI controller. Strangely enough, when the kernel is compiled with the USB_DEBUG option, the problem seems fixed, even when the debug sysctls are not enabled. Regards, Sebastien --Boundary-00=_88rkENcGEBGcY3b Content-Type: text/plain; charset="iso-8859-6"; name="eagle.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="eagle.txt" Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sun Jun 11 09:27:50 CEST 2006 root@oasis:/usr/src/sys/i386/compile/GOUROUGEEK Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.40GHz (2400.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNTX-ID,<b14>> real memory = 259850240 (247 MB) avail memory = 244801536 (233 MB) kbd1 at kbdmux0 acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xd0000000-0xd7ffffff,0xdff80000-0xdfffffff irq 11 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xdf20-0xdf3f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: LegSup = 0x0f30 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xdf40-0xdf5f irq 5 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: LegSup = 0x0f30 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xdf80-0xdf9f irq 9 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: LegSup = 0x0f30 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 usbd_get_string: getting lang failed, using 0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xdff7bc00-0xdff7bfff irq 10 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0: Get Max Lun not supported (STALLED) umass0:0:0:-1: Attached to scbus0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xc800-0xc8ff mem 0xdfdff000-0xdfdfffff irq 3 at device 12.0 on pci1 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:03:0d:07:3d:62 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0xe000-0xe0ff,0xe100-0xe13f at device 31.5 on pci0 pcm0: <VIA Technologies VIA1612A AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 0 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 acpi_lid0: <Control Method Lid Switch> on acpi0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcc800-0xcd7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 Timecounter "TSC" frequency 2400093756 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38204MB <SAMSUNG MP0402H UC100-14> at ata0-master UDMA100 acd0: CDRW <SAMSUNG CDRW/DVD SN-324F/U200> at ata1-master UDMA33 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Maxtor 6 B200P0 \\0000\\0000> Fixed Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 194481MB (398297088 512 byte sectors: 255H 63S/T 24792C) Trying to mount root from ufs:/dev/ad0s1a ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. -- usb debugging is then enabled, and the modem is connected usbd_new_device bus=0xc219e000 port=1 depth=1 speed=2 usbd_new_device: adding unit addr=2, rev=110, class=255, subclass=255, protocol=255, maxpacket=64, len=18, speed=2 usbd_new_device: new dev (addr 2), dev=0xc3154680, parent=0xc2192b80 usbd_probe_and_attach: trying device specific drivers usbd_probe_and_attach: no device specific driver found usbd_probe_and_attach: looping over 1 configurations usbd_set_config_index: (addr 1) cno=2 attr=0x80, selfpowered=0, power=100 usbd_set_config_index: set config 1 usbd_probe_and_attach: no interface drivers found ugen0: vendor 0x1110 product 0x9010, rev 1.10/40.00, addr 2 usbd_set_config_index: free old config usbd_set_config_index: (addr 1) cno=2 attr=0x80, selfpowered=0, power=100 usbd_set_config_index: set config 1 -- the firmware is uploaded ugen0: at uhub0 port 1 (addr 2) disconnected All threads purged from ugen0 ugen0: detached usbd_new_device bus=0xc219e000 port=1 depth=1 speed=2 usbd_new_device: adding unit addr=2, rev=100, class=2, subclass=0, protocol=0, maxpacket=64, len=18, speed=2 usbd_new_device: new dev (addr 2), dev=0xc3235600, parent=0xc2192b80 usbd_probe_and_attach: trying device specific drivers usbd_probe_and_attach: no device specific driver found usbd_probe_and_attach: looping over 1 configurations usbd_set_config_index: (addr 1) cno=2 attr=0x80, selfpowered=0, power=500 usbd_set_config_index: set config 1 usbd_probe_and_attach: no interface drivers found ugen0: vendor 0x1110 ADSL-USB Modem, rev 1.00/40.0b, addr 2 usbd_set_config_index: free old config usbd_set_config_index: (addr 1) cno=2 attr=0x80, selfpowered=0, power=500 usbd_set_config_index: set config 1 -- modem is disconnected ugen0: at uhub0 port 1 (addr 2) disconnected All threads purged from ugen0.4 All threads purged from ugen0.2 All threads purged from ugen0 ugen0: detached --Boundary-00=_88rkENcGEBGcY3b--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606161625.00394.sebastien.bourdeauducq>