Skip site navigation (1)Skip section navigation (2) 
Date:      Tue, 9 Mar 2004 16:52:22 +0300
From:      rust <rust@vinet.ru>
To:        freebsd-hardware@freebsd.org
Subject:   Digi AccelePort 4r 920 driver support in puc?
Message-ID:  <174698690593.20040309165222@vinet.ru>
next in thread | raw e-mail | index | archive | help 
Hello freebsd-hardware,

I have Digi AccelePort 4r 920 and it work fine on Linux

But now I  install FreeBSD 5.2 and there are no support for this
multiport card


#pciconf -l -v
pci0@pci3:1:0:       class=0x078000 card=0x00000000 chip=0x0026114f rev=0x01 hdr=0x00
    vendor   = 'Digi International'
    device   = 'AccelePort 4r 920'
    class    = simple comms

# pciconf -r  pci3:1:0 0:0xfF
0026114f 02000103 07800001 00000000
df800000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
dfdf0000 00000000 00000000 00000111
04030f0a 0010012c 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000

or

#pciconf -r -b pci3:1:0 0:0xfF
4f 11 26 00 03 01 00 02  01 00 80 07 00 00 00 00
00 00 80 df 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 df df 00 00 00 00  00 00 00 00 11 01 00 00
0a 0f 03 04 2c 01 10 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00



I add in pucdata.c


        {   "Digiboard XR 920",
            NULL,
            {   0x114f, 0x0026, 0, 0 },
            {   0xffff, 0xffff, 0, 0 },
            {
                { PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ},
            },

but unsuccefully - in dmesg i have

puc0: <Digiboard 4R 920> mem 0xdf800000-0xdfbfffff irq 17 at device 1.0 on pci3
puc0: could not get resource

How i make support in puc for Digi card??


-- 
Best regards,
 rust                          mailto:rust@vinet.ru

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?174698690593.20040309165222>