Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Jul 1998 10:29:29 +0100 (BST)
From:      Kerry Woods <kerryw@demon.net>
To:        freebsd-scsi@FreeBSD.ORG
Subject:   AHC SCSI errors
Message-ID:  <901099770.0027031.0@office.demon.net>

next in thread | raw e-mail | index | archive | help
Hi

Using the FreeBSD 2.2CAM-19980716-SNAP, with 

ahc1 <Adaptec 3940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci1:4:0
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc2 <Adaptec 3940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci1:5:0
ahc2: aic7880 Wide Channel B, SCSI Id=7, 16/255 SCBs

and 
da1 at ahc1 bus 0 target 0 lun 0
da1: <SEAGATE ST15230N 0638> Fixed Direct Access SCSI2 device 
da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
da1: 4095MB (8386733 512 byte sectors: 64H 32S/T 4095C)

plus five more of the same disks off ahc1 forming a ccd array

Problems seen:

Jul 21 17:58:04 test /kernel: SEQADDR == 0x8
Jul 21 17:58:04 test /kernel: SSTAT1 == 0xa
Jul 21 17:58:04 test /kernel: (da2:ahc1:0:1:0): Queuing a BDR SCB
Jul 21 17:58:04 test /kernel: (da2:ahc1:0:1:0): Bus Device Reset Message Sent
Jul 21 17:58:04 test /kernel: (da2:ahc1:0:1:0): no longer in timeout, status = 3
4c
Jul 21 17:58:04 test /kernel: ahc1: Bus Device Reset Sent. 1 SCBs aborted
Jul 21 17:58:12 test /kernel: (da2:ahc1:0:1:0): SCB 0x7c - timed out while idle,
 LASTPHASE == 0x1, SCSISIGI == 0x0
Jul 21 17:58:12 test /kernel: SEQADDR == 0xb
Jul 21 17:58:12 test /kernel: SSTAT1 == 0xa
Jul 21 17:58:12 test /kernel: (da2:ahc1:0:1:0): Queuing a BDR SCB
Jul 21 17:58:12 test /kernel: (da2:ahc1:0:1:0): Bus Device Reset Message Sent
Jul 21 17:58:12 test /kernel: (da2:ahc1:0:1:0): no longer in timeout, status = 3
4c

Seen over various drives and over both controllers when the drives were
split between them; option SCB_PAGING is not enabled;

Any suggestions appreciated

Cheers
-- 
Kerry Woods                                  kerryw@demon.net

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?901099770.0027031.0>