From owner-freebsd-hackers Sun Mar 1 16:00:34 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id QAA28543 for freebsd-hackers-outgoing; Sun, 1 Mar 1998 16:00:34 -0800 (PST) (envelope-from owner-freebsd-hackers@FreeBSD.ORG) Received: from implode.root.com (implode.root.com [198.145.90.17]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id QAA28502 for ; Sun, 1 Mar 1998 16:00:11 -0800 (PST) (envelope-from root@implode.root.com) Received: from implode.root.com (localhost [127.0.0.1]) by implode.root.com (8.8.5/8.8.5) with ESMTP id PAA24648; Sun, 1 Mar 1998 15:57:24 -0800 (PST) Message-Id: <199803012357.PAA24648@implode.root.com> To: Ulf Zimmermann cc: abial@nask.pl (Andrzej Bialecki), hackers@FreeBSD.ORG Subject: Re: Intel DK440LX motherboard with EtherExpress Pro/100B on board In-reply-to: Your message of "Sun, 01 Mar 1998 12:09:48 PST." <199803012009.MAA23799@Gatekeeper.Alameda.net> From: David Greenman Reply-To: dg@root.com Date: Sun, 01 Mar 1998 15:57:24 -0800 Sender: owner-freebsd-hackers@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > > > fxp0: warning: unsupported PHY, type = 11, addr = 1 ... >Port Name Status Vlan Level Duplex Speed Type >----- ------------------ ---------- ---------- ------ ------ ----- ------------ > 5/11 connected 1 normal full 100 10/100BaseTX > >And I just checked transfer rates, very bad. many runts. >Switched hub from Full Duplex 100 to Auto and it still shows Full Duplex and >100, but much better transfer rate. When that error comes out, full-duplex operation won't work correctly, so you'll have to use half duplex until support can be added for the PHY. It would help if you told me what chips were on the board. -DG David Greenman Core-team/Principal Architect, The FreeBSD Project To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message