Date: Fri, 17 Nov 2006 09:22:22 -0800 From: Mark Atkinson <atkin901@yahoo.com> To: freebsd-current@freebsd.org Subject: Re: cvs commit: src/sys/dev/bce if_bce.c src/sys/dev/em if_em.c if_em.h src/sys/dev/mpt mpt.h mpt_pci.c Message-ID: <ejkr4f$s0f$1@sea.gmane.org> References: <200611152004.kAFK4vfe058983@repoman.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
(moving to current to avoid dirtying src further) John Baldwin wrote: > jhb 2006-11-15 20:04:57 UTC > > FreeBSD src repository > > Modified files: > sys/dev/bce if_bce.c > sys/dev/em if_em.c if_em.h > sys/dev/mpt mpt.h mpt_pci.c > Log: > Add MSI support to em(4), bce(4), and mpt(4). For now, we only support > devices that support a maximum of 1 message, and we use that 1 message > instead of the INTx rid 0 IRQ with the same interrupt handler, etc. > > Revision Changes Path > 1.19 +11 -3 src/sys/dev/bce/if_bce.c > 1.164 +11 -2 src/sys/dev/em/if_em.c > 1.56 +1 -0 src/sys/dev/em/if_em.h > 1.31 +1 -0 src/sys/dev/mpt/mpt.h > 1.39 +14 -1 src/sys/dev/mpt/mpt_pci.c > _______________________________________________ > cvs-src@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/cvs-src > To unsubscribe, send any mail to "cvs-src-unsubscribe@freebsd.org" This is great, I don't know if you plan on adding MSI support to all network drivers that could support it, but here's the output from the Tyan S2895 (k8WE) for the nve0 and nve1 devices, which report supporting 2 messages. pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LMAC:0) pci_link8: Picked IRQ 21 with weight 1 pcib0: slot 10 INTA routed to irq 21 via \\_SB_.PCI0.LMAC found-> vendor=0x10de, dev=0x005d, revid=0xa3 bus=0, slot=14, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit [...] pcib6: matched entry for 128.10.INTA (src \\_SB_.PCI1.LMAC:0) pci_link22: Picked IRQ 52 with weight 0 ioapic3: Changing polarity for pin 20 to high pcib6: slot 10 INTA routed to irq 52 via \\_SB_.PCI1.LMAC found-> vendor=0x10de, dev=0x005d, revid=0xa3 bus=128, slot=14, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit nve0@pci0:10:0: class=0x068000 card=0x289510f1 chip=0x005710de rev=0xa3 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 Ethernet Controller' class = bridge nve1@pci128:10:0: class=0x068000 card=0x289510f1 chip=0x005710de rev=0xa3 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce4 Ethernet Controller' class = bridge -- Mark Atkinson atkin901@yahoo.com (!wired)?(coffee++):(wired);
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ejkr4f$s0f$1>