Date: Fri, 29 May 1998 06:42:24 +0930 From: Greg Lehey <grog@lemis.com> To: "m. w." <m_wall@hotmail.com> Cc: FreeBSD SCSI Mailing List <freebsd-scsi@FreeBSD.ORG> Subject: Re: plextor SCSI cdrom Message-ID: <19980529064224.K25469@freebie.lemis.com> In-Reply-To: <19980528210858.1091.qmail@hotmail.com>; from m. w. on Thu, May 28, 1998 at 02:08:57PM -0700 References: <19980528210858.1091.qmail@hotmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 28 May 1998 at 14:08:57 -0700, m. w. wrote: > > >>> Hi, people-- >>> I seem to have a slight problem with FreeBSD version 2.2.6 seeing >>> my cdrom and tape drive. I have an Adaptec AHA-2940UW controller with a >>> Plextor 12x cdrom and Conner tape drive running off of it. NT sees >>> everything just fine, but when I boot from the cd to install BSD, it >>> probes the controller and finds nothing on any of the id's. It gets an >>> unknown response and says that the board is not responding. On the fifth >>> id it should find the cdrom, but it passes over it just like everything >>> else. The cables and termination are just fine. I can get as far as >>> selecting which media I want to install from, and when I select cdrom, >>> it simply says it can't find one. If anyone has any ideas, they'd be >>> appreciated. >> >> Let's see the dmesg output. >> >> Greg > > Well, here's the stuff it gives me: > ----------------------------------------------------------- > Probing for devices on PCI bus 0: > (it finds my chipset here) > ahc0<Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 10 on PCI > 0:11:0 > ahc0: aic 7880 Wide Channel, SCSI id = 7, 16SCBs > ahc0 waiting for scsi devices to settle > (ahc 0:0:0): "Seagate ST19171W 0023" type 0 fixed SCSI 2 > sdo (aho 0:0:0): Direct-Access 8683MB (lists clusters and stuff) > ahc0: board is not responding > (ahc 0:3:0): SCB 0x0 timedout in datain phase, SCSISIGI = 0x44 > SEQADDR = 0x128 SCSIEQ = 0x12 SSTAT0 = 0x0 SSTAT1 = 0x3 > (ahc 0:3:0): abort message in message buffer > ahc0: board is not responding > cmd fail > (ahc 0:3:0): SCB 0x1 timedout while recovery in progress > (ahc 0:3:0) "unknown unknown ????" type 13 fixed scsi 0 > uk0(ahc 0:3:0): Unknown > ahc0: board is not responding > (ahc 0:3:1): SCB 0x2 timedout while recovery in progress > (ahc 0:3:1): "unknown unknown ????" type 13 fixed scsi 0 > uk1(ahc0:3:1): Unknown > ahc0: board is not responding > cmd fail > ----------------------------------------------------------- > > It repeats this for every ID it probes, and then goes on with the rest > of the pci and isa detection, which has no problems. I'm pretty sure the > userconfig screen lists the drq and everything right, but I'll check > again. I haven't seen anything like this before. I'm copying the -scsi list. Maybe somebody there has an idea. Greg -- See complete headers for address and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980529064224.K25469>