Date: Fri, 26 Sep 2003 09:28:39 -0700 From: Joe Kelsey <joek@mail.flyingcroc.net> To: stable@freebsd.org Subject: 4.9 Boot Hang when USB Devices Attached Message-ID: <3F746937.2070409@mail.flyingcroc.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------090609000500050601080908 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit I have a system running FreeBSD zircon.zircon.seattle.wa.us 4.9-PRERELEASE FreeBSD 4.9-PRERELEASE #20: Fri Sep 19 12:55:28 PDT 2003 joe@zircon.zircon.seattle.wa.us:/usr/obj/usr/src/sys/ZIRCON i386 When I upgraded to fix the OpenSSH problems, the system started hanging at boot time right after the USB/OHCI messages whenever I had devices plugged into the USB ports (mainly a USB mouse). Now, in order to boot, I have to unplug the mouse and wait for the system to pass the USB part of boot before replugging. Due to lack of attention on my part, I had previously built a kernel around 25 August which also exhibited this same symptom, but I had never actually booted it. So, when I reverted to kernel.old, I got the same hang. I had an old GENERIC kernel that I booted from to experiment with solving the problems. It seems a little more than inconvenient to have to unplug and replug USB devices in order to boot. Does anyone have any insight to offer? dmesg output attached. /Joe --------------090609000500050601080908 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-PRERELEASE #20: Fri Sep 19 12:55:28 PDT 2003 joe@zircon.zircon.seattle.wa.us:/usr/obj/usr/src/sys/ZIRCON Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(TM) XP 1800+ (1533.39-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> real memory = 536854528 (524272K bytes) avail memory = 518144000 (506000K bytes) Preloaded elf kernel "kernel" at 0xc0421000. Preloaded elf module "snd_cmi.ko" at 0xc042109c. Preloaded elf module "snd_pcm.ko" at 0xc042113c. Preloaded elf module "usb.ko" at 0xc04211dc. Preloaded elf module "ums.ko" at 0xc0421278. Preloaded elf module "umass.ko" at 0xc0421314. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-PRERELEASE #20: Fri Sep 19 12:55:28 PDT 2003 joe@zircon.zircon.seattle.wa.us:/usr/obj/usr/src/sys/ZIRCON Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(TM) XP 1800+ (1533.40-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> real memory = 536854528 (524272K bytes) avail memory = 518144000 (506000K bytes) Preloaded elf kernel "kernel" at 0xc0421000. Preloaded elf module "snd_cmi.ko" at 0xc042109c. Preloaded elf module "snd_pcm.ko" at 0xc042113c. Preloaded elf module "usb.ko" at 0xc04211dc. Preloaded elf module "ums.ko" at 0xc0421278. Preloaded elf module "umass.ko" at 0xc0421314. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00f1e30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <Matrox MGA G550 AGP graphics accelerator> at 0.0 irq 11 isab0: <PCI to ISA bridge (vendor=1039 device=0018)> at device 2.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <SiS 5571 USB controller> mem 0xf2800000-0xf2800fff irq 6 at device 2.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xf2000000-0xf2000fff irq 9 at device 2.3 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiS 5591 ATA100 controller> port 0xd800-0xd80f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <CMedia CMI8738> port 0xb000-0xb0ff irq 10 at device 5.0 on pci0 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xa800-0xa8ff mem 0xf1800000-0xf1800fff irq 10 at device 9.0 on pci0 aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs de0: <Digital 21140A Fast Ethernet> port 0xa400-0xa47f mem 0xf1000000-0xf100007f irq 5 at device 10.0 on pci0 de0: 21140A [10-100Mb/s] pass 2.0 de0: address 00:40:05:31:ea:13 pcib1: <SiS 5591 host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROMs> at iomem 0xc0000-0xc8fff,0xcc000-0xcc7ff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port pca0 at port 0x40 on isa0 joy0 at port 0x201 on isa0 IPsec: Initialized Security Association Processing. ad0: 58644MB <IC35L060AVVA07-0> [119150/16/63] at ata0-master UDMA100 ad1: 58644MB <IC35L060AVVA07-0> [119150/16/63] at ata0-slave UDMA100 acd0: DVD-ROM <DVD-ROM DDU1621> at ata1-master PIO4 Waiting 2 seconds for SCSI devices to settle de0: enabling Full Duplex 100baseTX port pt0 at ahc0 bus 0 target 3 lun 0 pt0: <HP C5100A R032> Fixed Processor SCSI-2 device pt0: 3.300MB/s transfers Mounting root from ufs:/dev/ad0s1a cd1 at ata1 bus 0 target 0 lun 0 cd1: <SONY DVD-ROM DDU1621 S1.6> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present cd0 at ahc0 bus 0 target 4 lun 0 cd0: < CD-R/RW RW7060S 1.20> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present WARNING: / was not properly dismounted ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. --------------090609000500050601080908--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F746937.2070409>