Date: Tue, 27 Jan 2004 17:15:19 +0300 From: =?koi8-r?B?4czFy9PFyiDkzcnU0snF18ne?= <novad@newmail.ru> To: freebsd-questions@FreeBSD.ORG Subject: Re[2]: Problem with foppy drive Message-ID: <01192224.20040127171519@newmail.ru> In-Reply-To: <MIEPLLIBMLEEABPDBIEGOENKFFAA.fbsd_user@a1poweruser.com> References: <873340513.20040123145624@newmail.ru> <MIEPLLIBMLEEABPDBIEGOENKFFAA.fbsd_user@a1poweruser.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Friend I could not write you earlier because I didn't have Internet so i write you now. First time i made default BOIS setup Than i booted FreeBSD when the table with different boot options appered i choosed (There is a devil on the right part of the display): Boot FreeBSD with ACPI disable (it has second number) after it logged in as root and found that there is fd0-file in /dev and i can mount floppy drive (i mounted it)and it works good. Than i rebooted my PC and booted FreeBSD as it does itself (default) and found that there is no fd0 So whan i boot FreeBSD with ACPI disable it's possible to use floppy. That's all. Friday, January 23, 2004, 4:50:00 PM, you wrote: f> Please explain in detail what you did different this time to get f> your floppy drive working. f> How did you disable ACPI? f> -----Original Message----- f> From: owner-freebsd-questions@freebsd.org f> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Алексей f> Дмитриевич f> Sent: Friday, January 23, 2004 6:56 AM f> To: freebsd-questions@FreeBSD.ORG f> Subject: Problem with foppy drive f> Hello Support. f> I have read this files and it didn't help me. f> Also I booted with GENERIC kernel and my floppy drive didn't work. f> But this day I booted in kernel's model where ACPI don't supports f> at f> all and my drive worked good. So it helps to solve the problem. f> Thank you for help. f> Thursday, January 22, 2004, 7:56:42 PM, you wrote: f>> Ok friend I found your problem. f>> You deleted part of the floppy definition out of your custom f> kernel f>> source. Look at the GENERIC or LINT kernel source for how the f>> floppy should be defined and copy those statements into your f>> custom kernel and recompile. f>> -----Original Message----- f>> From: owner-freebsd-questions@freebsd.org f>> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Алексей f>> Дмитриевич f>> Sent: Thursday, January 22, 2004 3:45 AM f>> To: freebsd-questions@FreeBSD.ORG f>> Subject: Problem with foppy drive f>> Hello friend f>> I did everything you wrote about and it didn't help me. f>> dmesg did not change at all so floppy drive didn't work. f>> All PnP options was disable from the hole beginning and they are f>> disable f>> and now. f>> But I fount in BIOS one option :"OnBoard FDC". f>> I disabled it and found that some things have changed in f> dmesg.boot. f>> There disappeared lines with some fdc0 errors (i send it in this f>> e-mail) f>> Also I send you my kernel configuration maybe i should write or f>> delete some f>> lines there. f>> ---------dmesg------------------------- f>> Copyright (c) 1992-2003 The FreeBSD Project. f>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, f> 1993, f>> 1994 f>> The Regents of the University of California. All rights f>> reserved. f>> FreeBSD 5.1-RELEASE #0: Wed Jan 21 16:35:32 MSK 2004 f>> root@:/usr/src/sys/i386/compile/NovAD3c f>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc050b000. f>> Timecounter "i8254" frequency 1193182 Hz f>> Timecounter "TSC" frequency 1817950912 Hz f>> CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1817.95-MHz 686-class f> CPU) f>> Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 f>> f> Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE, f>> MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> f>> real memory = 536805376 (511 MB) f>> avail memory = 515895296 (491 MB) f>> Pentium Pro MTRR support enabled f>> acpi0: <AMIINT INTEL845> on motherboard f>> pcibios: BIOS version 2.10 f>> Using $PIR table, 6 entries at 0xc00f78a0 f>> acpi0: power button is handled as a fixed feature programming f> model. f>> Timecounter "ACPI-fast" frequency 3579545 Hz f>> ACPI-1287: *** Error: Method execution failed f> [\\_SB_.PCI0.MDET] f>> (Node 0xc150ed20), AE_AML_REGION_LIMIT f>> ACPI-1287: *** Error: Method execution failed f> [\\_SB_.PCI0._CRS] f>> (Node 0xc150ec60), AE_AML_REGION_LIMIT f>> ACPI-0175: *** Error: Method execution failed f> [\\_SB_.PCI0._CRS] f>> (Node 0xc150ec60), AE_AML_REGION_LIMIT f>> can't fetch resources for \\_SB_.PCI0 - AE_AML_REGION_LIMIT f>> ACPI-1287: *** Error: Method execution failed f> [\\_SB_.PCI0.MDET] f>> (Node 0xc150ed20), AE_AML_REGION_LIMIT f>> ACPI-1287: *** Error: Method execution failed f> [\\_SB_.MEM_._CRS] f>> (Node 0xc4046a20), AE_AML_REGION_LIMIT f>> ACPI-0175: *** Error: Method execution failed f> [\\_SB_.MEM_._CRS] f>> (Node 0xc4046a20), AE_AML_REGION_LIMIT f>> can't fetch resources for \\_SB_.MEM_ - AE_AML_REGION_LIMIT f>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on f> acpi0 f>> acpi_cpu0: <CPU> on acpi0 f>> acpi_button0: <Power Button> on acpi0 f>> pcib0: <ACPI Host-PCI bridge> on acpi0 f>> pci0: <ACPI PCI bus> on pcib0 f>> agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe7ffffff f> at f>> device 0.0 on pci0 f>> pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 f>> pci1: <PCI bus> on pcib1 f>> pci1: <display, VGA> at device 0.0 (no driver attached) f>> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 f>> pci2: <ACPI PCI bus> on pcib2 f>> pcm0: <Creative EMU10K1> port 0xc800-0xc81f irq 12 at device 3.0 f> on f>> pci2 f>> pcm0: <SigmaTel STAC9708/11 AC97 Codec> f>> pci2: <simple comms> at device 4.0 (no driver attached) f>> isab0: <PCI-ISA bridge> at device 31.0 on pci0 f>> isa0: <ISA bus> on isab0 f>> atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f at f>> device 31.1 on pci0 f>> ata0: at 0x1f0 irq 14 on atapci0 f>> ata1: at 0x170 irq 15 on atapci0 f>> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port f>> 0xe800-0xe81f irq 12 at device 31.2 on pci0 f>> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 f>> usb0: USB revision 1.0 f>> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 f>> uhub0: 2 ports with 2 removable, self powered f>> pci0: <serial bus, SMBus> at device 31.3 (no driver attached) f>> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port f>> 0xec00-0xec1f irq 10 at device 31.4 on pci0 f>> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 f>> usb1: USB revision 1.0 f>> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 f>> uhub1: 2 ports with 2 removable, self powered f>> sio0 port 0x3f8-0x3ff irq 4 on acpi0 f>> sio0: type 16550A f>> sio1 port 0x2f8-0x2ff irq 3 on acpi0 f>> sio1: type 16550A f>> ppc0 port 0x378-0x37f irq 7 on acpi0 f>> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode f>> ppbus0: <Parallel port bus> on ppc0 f>> plip0: <PLIP network interface> on ppbus0 f>> lpt0: <Printer> on ppbus0 f>> lpt0: Interrupt-driven port f>> ppi0: <Parallel I/O> on ppbus0 f>> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on f> acpi0 f>> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 f>> kbd0 at atkbd0 f>> npx0: <math processor> on motherboard f>> npx0: INT 16 interface f>> pmtimer0 on isa0 f>> fdc0: cannot reserve I/O port range (6 ports) f>> pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 5 on isa0 f>> pcic_attach: attach found no sockets f>> device_probe_and_attach: pcic0 attach returned 6 f>> sc0: <System console> at flags 0x100 on isa0 f>> sc0: VGA <16 virtual consoles, flags=0x300> f>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff f> on f>> isa0 f>> Timecounters tick every 10.000 msec f>> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently f>> 100.0% f>> ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100 f>> acd0: CD-RW <YAMAHA CRW3200E> at ata1-master PIO4 f>> acd1: CDROM <ASUS CD-S500/A> at ata1-slave PIO4 f>> Mounting root from ufs:/dev/ad0s3a f>> KLD fire_saver.ko: depends on splash - not available f>> --------------------------------------- f>> Here is kernel config f>> I deleted some devices. f>> I don't have them but I didn't change lines about floppy (I think f>> so). f>> -------------------------------------- f>> machine i386 f>> cpu I686_CPU f>> ident NovAD_3c f>> #To statically compile in device wiring instead of f>> /boot/device.hints f>> #hints "GENERIC.hints" #Default places to look f> for f>> devices. f>> options CPU_ENABLE_SSE f>> options SCHED_4BSD #4BSD scheduler f>> options INET #InterNETworking f>> options INET6 #IPv6 communications f>> protocols f>> options FFS #Berkeley Fast Filesystem f>> options SOFTUPDATES #Enable FFS soft updates f>> support f>> options UFS_ACL #Support for access f> control f>> lists f>> options UFS_DIRHASH #Improve performance on f> big f>> directories f>> options MD_ROOT #MD is a potential root f>> device f>> options MSDOSFS #MSDOS Filesystem f>> options CD9660 #ISO 9660 Filesystem f>> options PROCFS #Process filesystem f>> (requires PSEUDOFS) f>> options PSEUDOFS #Pseudo-filesystem f> framework f>> options COMPAT_43 #Compatible with BSD 4.3 f>> [KEEP THIS!] f>> options COMPAT_FREEBSD4 #Compatible with FreeBSD4 f>> options SCSI_DELAY=15000 #Delay (in ms) before f>> probing SCSI f>> options KTRACE #ktrace(1) support f>> options SYSVSHM #SYSV-style shared memory f>> options SYSVMSG #SYSV-style message f> queues f>> options SYSVSEM #SYSV-style semaphores f>> options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B f>> real-time extensions f>> options KBD_INSTALL_CDEV # install a CDEV entry in f>> /dev f>> options AHC_REG_PRETTY_PRINT # Print register f> bitfields f>> in debug f>> # output. Adds ~128k to f>> driver. f>> options AHD_REG_PRETTY_PRINT # Print register f> bitfields f>> in debug f>> # output. Adds ~215k to f>> driver. f>> # Debugging for use in -current f>> #!!!options INVARIANT_SUPPORT #Extra sanity checks of f>> internal structures, required by INVARIANTS f>> # To make an SMP kernel, the next two are needed f>> device isa f>> device eisa f>> device pci f>> device pcm f>> device acpi f>> # Floppy drives f>> device fdc f>> # ATA and ATAPI devices f>> device ata f>> device atadisk # ATA disk drives f>> device atapicd # ATAPI CDROM drives f>> device atapifd # ATAPI floppy drives f>> device atapist # ATAPI tape drives f>> options ATA_STATIC_ID #Static device numbering f>> # SCSI peripherals f>> device scbus # SCSI bus (required) f>> device da # Direct Access (disks) f>> # atkbdc0 controls both the keyboard and the PS/2 mouse f>> device atkbdc # AT keyboard controller f>> device atkbd # AT keyboard f>> device psm # PS/2 mouse f>> device vga # VGA video card driver f>> # syscons is the default console driver, resembling an SCO f> console f>> device sc f>> device agp # support several AGP chipsets f>> # Floating point support - do not disable. f>> device npx f>> # Add suspend/resume support for the i8254. f>> device pmtimer f>> # PCCARD (PCMCIA) support f>> # Pcmcia and cardbus bridge support f>> device cbb # cardbus (yenta) bridge f>> device pcic # ExCA ISA and PCI f> bridges f>> device pccard # PC Card (16-bit) bus f>> device cardbus # CardBus (32-bit) bus f>> # Serial (COM) ports f>> device sio # 8250, 16[45]50 based serial f> ports f>> # Parallel port f>> device ppc f>> device ppbus # Parallel port bus (required) f>> device lpt # Printer f>> device plip # TCP/IP over parallel f>> device ppi # Parallel port interface device f>> # NOTE: Be sure to keep the 'device miibus' line in order to use f>> these NICs! f>> device miibus # MII bus support f>> # Pseudo devices - the number indicates how many units to f> allocate. f>> device random # Entropy device f>> device loop # Network loopback f>> device ether # Ethernet support f>> device sl # Kernel SLIP f>> device ppp # Kernel PPP f>> device tun # Packet tunnel. f>> device pty # Pseudo-ttys (telnet etc) f>> device md # Memory "disks" f>> device gif # IPv6 and IPv4 tunneling f>> device faith # IPv6-to-IPv4 relaying f>> (translation) f>> # The `bpf' device enables the Berkeley Packet Filter. f>> # Be aware of the administrative consequences of enabling this! f>> device bpf # Berkeley packet filter f>> # USB support f>> device uhci # UHCI PCI->USB interface f>> device ohci # OHCI PCI->USB interface f>> device usb # USB Bus (required) f>> device ugen # Generic f>> device umass # Disks/Mass storage - Requires f>> scbus and da f>> # FireWire support f>> device firewire # FireWire bus code f>> device sbp # SCSI over FireWire (Requires f> scbus f>> and da) f>> #device fwe # Ethernet over FireWire f>> (non-standard!) f>> -------------------------------------- f>> Tuesday, January 20, 2004, 6:01:53 PM, you wrote: f>>> Friend f>>> I think I see your problem in the boot log. f>>> FBSD is having problems reading your PC's bios. f>>> Enter your PC bio's menu and disable all options dealing with f>> power f>>> management. f>>> While you are there also disable any plug-n-play option and if f>> there f>>> is an operating system option change that to 'other' or at least f>> not f>>> ms/windows. f>>> f>> f> http://www.freebsd.org/cgi/man.cgi?query=acpi&apropos=0&sektion=0&ma f>>> npath=FreeBSD+5.2-RELEASE+and+Ports&format=html f>>> acpi -- Advanced Configuration and Power Management support f>>> -----Original Message----- f>>> From: owner-freebsd-questions@freebsd.org f>>> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Алексей f>>> Дмитриевич f>>> Sent: Tuesday, January 20, 2004 8:16 AM f>>> To: freebsd-questions@FreeBSD.ORG f>>> Subject: Problem with foppy drive f>>> Hello Друг( it means friend on russian) f>>> Now I'll try to answer your questions. f>>> I tested my floppy drive in the same way f>>> 1. Boot one Operating System f>>> 2. Write some data on the floppy disc (usually it is mp3-files f> or f>>> jpg-files) f>>> 3. Reboot my PC and boot another OS f>>> 4. Check data - everything good f>>> 5. Format disc and test again in the same way f>>> Also I read and wrote data on my discs on another PC during this f>>> term f>>> and didn't have problems f>>> Next question about hardware f>>> 1. Soltek mainboard f>>> SL-85DIR f>>> Socket 478 Mainboard f>>> Intel 845d series f>>> 2. nVidia G-force 4 MX 440 64MB DDR (AGP) f>>> 3. 512MB DDR RAM memory f>>> 4. Creative Sound Blaster Live!5.1 f>>> 5. Winmodem ZyXEL Omni 56K PCI (i thinc FreeBSD know nothing f>> about f>>> it) f>>> 6. Asus CD-ROM drive 50x IDE f>>> 7. Yamaha 3200 CD-RW drive f>>> 8. Intel Pentium 4 Processor Socket 478 f>>> 9. HDD 40 Gb SEAGATE UDMA 7200 BARRACUDA f>>> 10. and this floppy drive f>>> I think that's all f>>> My PC is 1.5 years old. f>>> I bought in 24-July-2002 f>>> About scsi: f>>> There is no scsi in my computer so floppy drive is not scsi f>>> when I try : f>>> mount -t msdos /dev/fd0 /mnt f>>> my system displays : f>>> msdosfs : /dev/fd0: No sush file or directory f>>> I can say that there was no time whan this file existed f>>> so i cannot mount floppy f>>> Here is /var/run/dmesg.boot f>>> Copyright (c) 1992-2003 The FreeBSD Project. f>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, f>> 1993, f>>> 1994 f>>> The Regents of the University of California. All rights f>>> reserved. f>>> FreeBSD 5.1-RELEASE #0: Fri Jan 16 18:39:42 MSK 2004 f>>> root@:/usr/src/sys/i386/compile/NovAD3a f>>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc054a000. f>>> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc054a26c. f>>> Timecounter "i8254" frequency 1193182 Hz f>>> Timecounter "TSC" frequency 1817949908 Hz f>>> CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1817.95-MHz 686-class f>> CPU) f>>> Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 f>>> f>> f> Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE, f>>> MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> f>>> real memory = 536805376 (511 MB) f>>> avail memory = 515624960 (491 MB) f>>> Pentium Pro MTRR support enabled f>>> npx0: <math processor> on motherboard f>>> npx0: INT 16 interface f>>> acpi0: <AMIINT INTEL845> on motherboard f>>> pcibios: BIOS version 2.10 f>>> Using $PIR table, 6 entries at 0xc00f78a0 f>>> acpi0: power button is handled as a fixed feature programming f>> model. f>>> Timecounter "ACPI-fast" frequency 3579545 Hz f>>> ACPI-1287: *** Error: Method execution failed f>> [\\_SB_.PCI0.MDET] f>>> (Node 0xc150ec60), AE_AML_REGION_LIMIT f>>> ACPI-1287: *** Error: Method execution failed f>> [\\_SB_.PCI0._CRS] f>>> (Node 0xc150eba0), AE_AML_REGION_LIMIT f>>> ACPI-0175: *** Error: Method execution failed f>> [\\_SB_.PCI0._CRS] f>>> (Node 0xc150eba0), AE_AML_REGION_LIMIT f>>> can't fetch resources for \\_SB_.PCI0 - AE_AML_REGION_LIMIT f>>> ACPI-1287: *** Error: Method execution failed f>> [\\_SB_.PCI0.MDET] f>>> (Node 0xc150ec60), AE_AML_REGION_LIMIT f>>> ACPI-1287: *** Error: Method execution failed f>> [\\_SB_.MEM_._CRS] f>>> (Node 0xc4047960), AE_AML_REGION_LIMIT f>>> ACPI-0175: *** Error: Method execution failed f>> [\\_SB_.MEM_._CRS] f>>> (Node 0xc4047960), AE_AML_REGION_LIMIT f>>> can't fetch resources for \\_SB_.MEM_ - AE_AML_REGION_LIMIT f>>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on f>> acpi0 f>>> acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 f>>> acpi_button0: <Power Button> on acpi0 f>>> pcib0: <ACPI Host-PCI bridge> on acpi0 f>>> pci0: <ACPI PCI bus> on pcib0 f>>> agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe7ffffff f>> at f>>> device 0.0 on pci0 f>>> pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 f>>> pci1: <PCI bus> on pcib1 f>>> pci1: <display, VGA> at device 0.0 (no driver attached) f>>> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 f>>> pci2: <ACPI PCI bus> on pcib2 f>>> pcm0: <Creative EMU10K1> port 0xc800-0xc81f irq 12 at device 3.0 f>> on f>>> pci2 f>>> pcm0: <SigmaTel STAC9708/11 AC97 Codec> f>>> pci2: <simple comms> at device 4.0 (no driver attached) f>>> isab0: <PCI-ISA bridge> at device 31.0 on pci0 f>>> isa0: <ISA bus> on isab0 f>>> atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f at f>>> device 31.1 on pci0 f>>> ata0: at 0x1f0 irq 14 on atapci0 f>>> ata1: at 0x170 irq 15 on atapci0 f>>> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port f>>> 0xe800-0xe81f irq 12 at device 31.2 on pci0 f>>> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 f>>> usb0: USB revision 1.0 f>>> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 f>>> uhub0: 2 ports with 2 removable, self powered f>>> pci0: <serial bus, SMBus> at device 31.3 (no driver attached) f>>> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port f>>> 0xec00-0xec1f irq 10 at device 31.4 on pci0 f>>> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 f>>> usb1: USB revision 1.0 f>>> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 f>>> uhub1: 2 ports with 2 removable, self powered f>>> fdc0: cmd 3 failed at out byte 1 of 3 f>>> sio0 port 0x3f8-0x3ff irq 4 on acpi0 f>>> sio0: type 16550A f>>> sio1 port 0x2f8-0x2ff irq 3 on acpi0 f>>> sio1: type 16550A f>>> ppc0 port 0x378-0x37f irq 7 on acpi0 f>>> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode f>>> ppbus0: <Parallel port bus> on ppc0 f>>> plip0: <PLIP network interface> on ppbus0 f>>> lpt0: <Printer> on ppbus0 f>>> lpt0: Interrupt-driven port f>>> ppi0: <Parallel I/O> on ppbus0 f>>> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on f>> acpi0 f>>> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 f>>> kbd0 at atkbd0 f>>> fdc0: cmd 3 failed at out byte 1 of 3 f>>> pmtimer0 on isa0 f>>> fdc0: cannot reserve I/O port range (6 ports) f>>> pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 5 on isa0 f>>> pcic_attach: attach found no sockets f>>> device_probe_and_attach: pcic0 attach returned 6 f>>> sc0: <System console> at flags 0x100 on isa0 f>>> sc0: VGA <16 virtual consoles, flags=0x300> f>>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem f> 0xa0000-0xbffff f>> on f>>> isa0 f>>> Timecounters tick every 10.000 msec f>>> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently f>>> 100.0% f>>> ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100 f>>> acd0: CD-RW <YAMAHA CRW3200E> at ata1-master PIO4 f>>> acd1: CDROM <ASUS CD-S500/A> at ata1-slave PIO4 f>>> Mounting root from ufs:/dev/ad0s3a f>>> That's all. f>>> P.S. f>>> Thank you that you try to help me. f>>> Sunday, January 18, 2004, 7:28:54 PM, you wrote: f>>>> Hello friend f>>>> Post the /var/run/dmesg.boot file in your next email, so I can f>>> look f>>>> for problems. f>>>> Explain how you tested floppy drive using different operating f>>>> systems. f>>>> What hardware is in the PC? f>>>> How old is the PC? f>>>> Is it pre-Y2K? f>>>> Is this an scsi floppy drive? f>>>> Tell me what happens when you try this f>>>> Login in as root user f>>>> Put msdos formatted floppy disk in drive f>>>> Issue this command f>>>> mount -t msdos /dev/fd0 /mnt f>>>> cd /mnt f>>>> ls f>>>> cd /root f>>>> umount /mnt f>>>> -----Original Message----- f>>>> From: owner-freebsd-questions@freebsd.org f>>>> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of f> Алексей f>>>> Дмитриевич f>>>> Sent: Sunday, January 18, 2004 10:10 AM f>>>> To: freebsd-questions@FreeBSD.ORG f>>>> Subject: Problem with foppy drive f>>>> Hello , Support f>>>> I used my floppy just now in Ms Windows XP and it works. f>>>> Also i used it in ASPlinux 7.2 and Linux Mandrake 9.1 (russian) f>>>> and it worked very good. f>>>> So what should i do. if it is possible please write as detailly f>>> as f>>>> possible because i know FreeBSD badly (i use it for about 3 f>>> weeks) f>>>> This boot error message general means that your floppy drive is f>>>> broken. f>>>> When was the last time you used it? f>>>> Try to verify that it's in working order by booting an f> MS/Window f>>>> system on that PC, f>>>> or swap that floppy drive with one from some other PC that you f>>> can f>>>> test works first. f>>>> -----Original Message----- f>>>> From: owner-freebsd-questions@freebsd.org f>>>> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of f> Алексей f>>>> Дмитриевич f>>>> Sent: Sunday, January 18, 2004 8:28 AM f>>>> To: freebsd-questions@FreeBSD.ORG f>>>> Subject: FreeBSD support f>>>> Hello Support, f>>>> I have a problem my floppy drive does not want to work. f>>>> when my FreeBSD 5.1 boots I have a message f>>>> fdc0: cmd 3 faild at out byte 1 of 3 f>>>> and f>>>> cannot reserve I/O port range (6 port) f>>>> After logining I cannot use my floppy drive- there is no device f>>>> file. f>>>> What should I do? f>>>> -- f>>>> Best regards, f>>>> Alexey mailto:novad@newmail.ru f>>>> _______________________________________________ f>>>> freebsd-questions@freebsd.org mailing list f>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions f>>>> To unsubscribe, send any mail to f>>>> "freebsd-questions-unsubscribe@freebsd.org" f>>>> __________ f>>>> -- f>>>> Best regards, f>>>> Алексей mailto:novad@newmail.ru f>>>> _______________________________________________ f>>>> freebsd-questions@freebsd.org mailing list f>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions f>>>> To unsubscribe, send any mail to f>>>> "freebsd-questions-unsubscribe@freebsd.org" f>>>> __________ f>>>> www.zakaz.orc.ru - доставка карт связи: ОРЦ (IP-телефония, f>>>> доступ в Интернет, хостинг), МТС, БИ Плюс f>>> -- f>>> Best regards, f>>> Алексей mailto:novad@newmail.ru f>>> _______________________________________________ f>>> freebsd-questions@freebsd.org mailing list f>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions f>>> To unsubscribe, send any mail to f>>> "freebsd-questions-unsubscribe@freebsd.org" f>>> __________ f>>> http://www.newhost.ru - Уютно, по-домашнему, в тапочках..... f>> -- f>> Best regards, f>> Алексей mailto:novad@newmail.ru f>> _______________________________________________ f>> freebsd-questions@freebsd.org mailing list f>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions f>> To unsubscribe, send any mail to f>> "freebsd-questions-unsubscribe@freebsd.org" f>> __________ f>> www.zakaz.orc.ru - доставка карт связи: ОРЦ (IP-телефония, f>> доступ в Интернет, хостинг), МТС, БИ Плюс f> -- f> Best regards, f> Алексей mailto:novad@newmail.ru f> _______________________________________________ f> freebsd-questions@freebsd.org mailing list f> http://lists.freebsd.org/mailman/listinfo/freebsd-questions f> To unsubscribe, send any mail to f> "freebsd-questions-unsubscribe@freebsd.org" f> __________ f> www.zakaz.orc.ru - доставка карт связи: ОРЦ (IP-телефония, f> доступ в Интернет, хостинг), МТС, БИ Плюс -- Best regards, Алексей mailto:novad@newmail.ru
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01192224.20040127171519>