From owner-freebsd-bugs  Mon Nov 18  9: 0:21 2002
Delivered-To: freebsd-bugs@hub.freebsd.org
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 07A8137B401
	for <freebsd-bugs@hub.freebsd.org>; Mon, 18 Nov 2002 09:00:06 -0800 (PST)
Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21])
	by mx1.FreeBSD.org (Postfix) with ESMTP id DA11743E6E
	for <freebsd-bugs@hub.freebsd.org>; Mon, 18 Nov 2002 09:00:04 -0800 (PST)
	(envelope-from gnats@FreeBSD.org)
Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1])
	by freefall.freebsd.org (8.12.6/8.12.6) with ESMTP id gAIH04x3040199
	for <freebsd-bugs@freefall.freebsd.org>; Mon, 18 Nov 2002 09:00:04 -0800 (PST)
	(envelope-from gnats@freefall.freebsd.org)
Received: (from gnats@localhost)
	by freefall.freebsd.org (8.12.6/8.12.6/Submit) id gAIH04QA040198;
	Mon, 18 Nov 2002 09:00:04 -0800 (PST)
Date: Mon, 18 Nov 2002 09:00:04 -0800 (PST)
Message-Id: <200211181700.gAIH04QA040198@freefall.freebsd.org>
To: freebsd-bugs@FreeBSD.org
Cc: 
From: "Dan Langille" <dan@langille.org>
Subject: Re: kern/45324: Re: 4.7 kernel does not find aha1
Reply-To: "Dan Langille" <dan@langille.org>
Sender: owner-freebsd-bugs@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-bugs.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-bugs>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-bugs>
X-Loop: FreeBSD.org

The following reply was made to PR kern/45324; it has been noted by GNATS.

From: "Dan Langille" <dan@langille.org>
To: freebsd-gnats-submit@FreeBSD.org
Cc: dan@langille.org
Subject: Re: kern/45324: Re: 4.7 kernel does not find aha1
Date: Mon, 18 Nov 2002 09:40:38 -0500

 Might as well put this stuff with the PR:
 
 4.7-boot-v.txt  *****************************************************
 
 ok boot -v
 SMAP type=01 base=00000000 00000000 len=00000000 0009fc00
 SMAP type=01 base=00000000 0009fc00 len=00000000 00000400
 SMAP type=02 base=00000000 000f0000 len=00000000 00010000
 SMAP type=02 base=00000000 ffff0000 len=00000000 00010000
 SMAP type=01 base=00000000 00100000 len=00000000 03f00000
 Copyright (c) 1992-2002 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 
 1994
         The Regents of the University of California. All rights 
 reserved.
 FreeBSD 4.7-STABLE #0: Fri Nov 15 09:44:58 NZDT 2002
     dan@cvsup.nz.freebsd.org:/usr/home/ncvs/usr-src/sys/compile/ZEKE
 Calibrating clock(s) ... TSC clock: 132974131 Hz, i8254 clock: 
 1193359 Hz
 CLK_USE_I8254_CALIBRATION not specified - using default frequency
 Timecounter "i8254"  frequency 1193182 Hz
 CLK_USE_TSC_CALIBRATION not specified - using old calibration method
 CPU: Pentium/P54C (132.95-MHz 586-class CPU)
   Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
   Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
 real memory  = 67108864 (65536K bytes)
 Physical memory chunk(s):
 0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
 0x00506000 - 0x03ff7fff, 61808640 bytes (15090 pages)
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 avail memory = 60383232 (58968K bytes)
 bios32: Found BIOS32 Service Directory header at 0xc00fae70
 bios32: Entry = 0xfb270 (c00fb270)  Rev = 0  Len = 1
 pcibios: PCI BIOS entry at 0xb2a0
 pnpbios: Found PnP BIOS data at 0xc00fbf90
 pnpbios: Entry = f0000:bfb8  Rev = 1.0
 Other BIOS signatures found:
 ACPI: 00000000
 Preloaded elf kernel "kernel" at 0xc04df000.
 Intel Pentium detected, installing workaround for F00F bug
 Creating DISK md0
 md0: Malloc disk
 Math emulator present
 pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000005c
 pci_open(1a):   mode1res=0x80000000 (0x80000000)
 pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there 
 (id=12508086)
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 i586_bzero() bandwidth = 130225289 bytes/sec
 bzero() bandwidth = 736919675 bytes/sec
 pcib0: <Host to PCI bridge> on motherboard
 found-> vendor=0x8086, dev=0x1250, revid=0x03
         class=06-00-00, hdrtype=0x00, mfdev=0
         subordinatebus=0        secondarybus=0
 found-> vendor=0x8086, dev=0x7000, revid=0x01
         class=06-01-00, hdrtype=0x00, mfdev=1
         subordinatebus=0        secondarybus=0
 found-> vendor=0x8086, dev=0x7010, revid=0x00
         class=01-01-80, hdrtype=0x00, mfdev=0
         subordinatebus=0        secondarybus=0
         map[20]: type 1, range 32, base 0000f000, size  4
 found-> vendor=0x8086, dev=0x1229, revid=0x01
         class=02-00-00, hdrtype=0x00, mfdev=0
         subordinatebus=0        secondarybus=0
         intpin=a, irq=15
         map[10]: type 1, range 32, base e1100000, size 12
         map[14]: type 1, range 32, base 00006100, size  5
         map[18]: type 1, range 32, base e1000000, size 20
 found-> vendor=0x1013, dev=0x00a8, revid=0xf9
         class=03-00-00, hdrtype=0x00, mfdev=0
         subordinatebus=0        secondarybus=0
         map[10]: type 1, range 32, base e0000000, size 24
 pci0: <PCI bus> on pcib0
 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
         I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks
         Extended BIOS: disabled
         Lower BIOS: disabled
         Coprocessor IRQ13: enabled
         Mouse IRQ12: disabled
         Interrupt Routing: A: disabled, B: IRQ15, C: disabled, D: 
 disabled
                 MB0: disabled, MB1:
 isa0: <ISA bus> on isab0
 atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 
 7.1 on pci0
 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
 ata0: mask=03 ostat0=50 ostat2=00
 ata0-master: ATAPI 00 00
 ata0-slave: ATAPI 00 00
 ata0: mask=03 stat0=50 stat1=00
 ata0-master: ATA 01 a5
 ata0: devices=01
 ata0: at 0x1f0 irq 14 on atapci0
 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
 ata1: at 0x170 irq 15 on atapci0
 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6100-0x611f mem 
 0xe1000000-0xe10f
 ffff,0xe1100000-0xe1100fff irq 15 at device 18.0 on pci0
 fxp0: using memory space register mapping
         using shared irq15.
 fxp0: Ethernet address 00:a0:c9:16:d5:60, 10Mbps
 fxp0: PCI IDs: 8086 1229 0000 0000 0001
 fxp0: Dynamic Standby mode is disabled
 bpf: fxp0 attached
 pci0: <Cirrus Logic GD5434 SVGA controller> (vendor=0x1013, 
 dev=0x00a8) at 19.0
 ex_isa_identify()
 ata-: ata0 exists, using next available unit number
 ata-: ata1 exists, using next available unit number
 Trying Read_Port at 203
 ADP1542: adding irq mask 0xdc00
 ADP1542: adding dma mask 0xe0
 ADP1542: start dependant
 ADP1542: adding io range 0x330-0x333, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x334-0x337, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x234-0x237, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x230-0x233, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x134-0x137, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x130-0x133, size=0x4, align=0x4
 ADP1542: end dependant
 ADP1542: adding memory range 0xc8000-0xdffff, size=0x4000, 
 align=0x4000
 isa_probe_children: disabling PnP devices
 isa_probe_children: probing non-PnP devices
 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on 
 isa0
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 ata2 failed to probe at port 0x1f0 irq 14 on isa0
 ata3 failed to probe at port 0x170 irq 15 on isa0
 adv0 failed to probe on isa0
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x330
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x334
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x230
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x234
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x130
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x134
 bt0 failed to probe at port 0x134-0x137 on isa0
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0 failed to probe at port 0x134-0x137 on isa0
 aic0 failed to probe at port 0x140-0x15f on isa0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 psm0: current command byte:0047
 kbdc: TEST_AUX_PORT status:0000
 kbdc: RESET_AUX return code:00fe
 kbdc: RESET_AUX return code:00fe
 kbdc: RESET_AUX return code:00fe
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 psm0: failed to reset the aux device.
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
 isa0
 fb0: vga0, vga, type:VGA (5), flags:0x7007f
 fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
 fb0: init mode:24, bios mode:3, current mode:24
 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
 VGA parameters upon power-up
 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
 VGA parameters in BIOS for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
 EGA/VGA parameters to be used for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x100>
 sc0: fb0, terminal emulator: sc (syscons terminal)
 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
 pcic1: not probed (disabled)
 sio0: irq maps: 0x41 0x51 0x41 0x41
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
 sio0: type 16550A, console
 sio1: irq maps: 0x41 0x49 0x41 0x41
 sio1 at port 0x2f8-0x2ff irq 3 on isa0
 sio1: type 16550A
 sio2: not probed (disabled)
 sio3: not probed (disabled)
 ppc0: parallel port found at 0x378
 ppc0: using extended I/O port range
 ppc0: ECP SPP ECP+EPP SPP
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/15 bytes threshold
 plip0: <PLIP network interface> on ppbus0
 bpf: lp0 attached
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
 fe0 failed to probe at port 0x300-0x31f on isa0
 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
 cs0 failed to probe at port 0x300-0x31f on isa0
 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
 isa_probe_children: probing PnP devices
 aha1: status reg test failed ff
 unknown: <Adaptec 1542/aha-1535> failed to probe at port 0x330-0x33f 
 iomem 0xcc0
 00-0xcffff irq 10 drq 5 on isa0
 BIOS Geometries:
  0:026a3f3f 0..618=619 cylinders, 0..63=64 heads, 1..63=63 sectors
  1:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors
  2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 
 sectors
  0 accounted for
 Device configuration finished.
 bpf: lo0 attached
 bpf: ppp0 attached
 new masks: bio 68c040, tty 630098, net 678098
 bpf: sl0 attached
 bpf: faith0 attached
 IPsec: Initialized Security Association Processing.
 ad0: success setting WDMA2 on Intel chip
 Creating DISK ad0
 ar: FreeBSD check1 failed
 ad0: <Seagate Technology 1275MB - ST31276A/1.35> ATA-2 disk at ata0-
 master
 ad0: 1221MB (2501856 sectors), 2482 C, 16 H, 63 S, 512 B
 ad0: 16 secs/int, 1 depth queue, WDMA2
 ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0
 Mounting root from ufs:/dev/ad0s1a
 ad0s1: type 0xa5, start 63, end = 2499839, size 2499777 : OK
 start_init: trying /sbin/init
 swapon: adding /dev/ad0s1b as swap device
 Automatic boot in progress...
 /dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
 /dev/ad0s1a: clean, 6417 free (113 frags, 788 blocks, 0.2% 
 fragmentation)
 Can't open /dev/da1s1e: Device not configured
 /dev/da1s1e: CAN'T CHECK FILE SYSTEM.
 /dev/da1s1e: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
 /dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
 /dev/ad0s1f: clean, 647395 free (40411 frags, 75873 blocks, 3.6% 
 fragmentation)
 /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
 /dev/ad0s1e: clean, 17010 free (266 frags, 2093 blocks, 1.3% 
 fragmentation)
 THE FOLLOWING FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY:
         /dev/da1s1e (/home/ncvs)
 Automatic file system check failed . . . help!
 Enter full pathname of shell or RETURN for /bin/sh:
 
 4.6-boot-v.txt ******************************************************
 
 ok unload
 ok load kernel.old.works
 /kernel.old.works text=0x2e3775 data=0x3b4a0+0x345f4 
 syms=[0x4+0x3e450+0x4+0x44e
 15]
 ok boot -v
 SMAP type=01 base=00000000 00000000 len=00000000 0009fc00
 SMAP type=01 base=00000000 0009fc00 len=00000000 00000400
 SMAP type=02 base=00000000 000f0000 len=00000000 00010000
 SMAP type=02 base=00000000 ffff0000 len=00000000 00010000
 SMAP type=01 base=00000000 00100000 len=00000000 03f00000
 Copyright (c) 1992-2002 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 
 1994
         The Regents of the University of California. All rights 
 reserved.
 FreeBSD 4.6-STABLE #0: Tue Aug 13 13:31:45 NZST 2002
     dan@cvsup.nz.freebsd.org:/usr/home/ncvs/usr-obj/usr/src/sys/ZEKE
 Calibrating clock(s) ... TSC clock: 132973991 Hz, i8254 clock: 
 1193358 Hz
 CLK_USE_I8254_CALIBRATION not specified - using default frequency
 Timecounter "i8254"  frequency 1193182 Hz
 CLK_USE_TSC_CALIBRATION not specified - using old calibration method
 CPU: Pentium/P54C (132.96-MHz 586-class CPU)
   Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
   Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
 real memory  = 67108864 (65536K bytes)
 Physical memory chunk(s):
 0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
 0x00500000 - 0x03ff7fff, 61833216 bytes (15096 pages)
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 avail memory = 60407808 (58992K bytes)
 bios32: Found BIOS32 Service Directory header at 0xc00fae70
 bios32: Entry = 0xfb270 (c00fb270)  Rev = 0  Len = 1
 pcibios: PCI BIOS entry at 0xb2a0
 pnpbios: Found PnP BIOS data at 0xc00fbf90
 pnpbios: Entry = f0000:bfb8  Rev = 1.0
 Other BIOS signatures found:
 ACPI: 00000000
 Preloaded elf kernel "kernel.old.works" at 0xc04d9000.
 Intel Pentium detected, installing workaround for F00F bug
 md0: Malloc disk
 Creating DISK md0
 Math emulator present
 pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000005c
 pci_open(1a):   mode1res=0x80000000 (0x80000000)
 pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there 
 (id=12508086)
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 i586_bzero() bandwidth = 130225289 bytes/sec
 bzero() bandwidth = 736377025 bytes/sec
 pcib0: <Host to PCI bridge> on motherboard
 found-> vendor=0x8086, dev=0x1250, revid=0x03
         class=06-00-00, hdrtype=0x00, mfdev=0
         subordinatebus=0        secondarybus=0
 found-> vendor=0x8086, dev=0x7000, revid=0x01
         class=06-01-00, hdrtype=0x00, mfdev=1
         subordinatebus=0        secondarybus=0
 found-> vendor=0x8086, dev=0x7010, revid=0x00
         class=01-01-80, hdrtype=0x00, mfdev=0
         subordinatebus=0        secondarybus=0
         map[20]: type 1, range 32, base 0000f000, size  4
 found-> vendor=0x8086, dev=0x1229, revid=0x01
         class=02-00-00, hdrtype=0x00, mfdev=0
         subordinatebus=0        secondarybus=0
         intpin=a, irq=15
         map[10]: type 1, range 32, base e1100000, size 12
         map[14]: type 1, range 32, base 00006100, size  5
         map[18]: type 1, range 32, base e1000000, size 20
 found-> vendor=0x1013, dev=0x00a8, revid=0xf9
         class=03-00-00, hdrtype=0x00, mfdev=0
         subordinatebus=0        secondarybus=0
         map[10]: type 1, range 32, base e0000000, size 24
 pci0: <PCI bus> on pcib0
 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
         I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks
         Extended BIOS: disabled
         Lower BIOS: disabled
         Coprocessor IRQ13: enabled
         Mouse IRQ12: disabled
         Interrupt Routing: A: disabled, B: IRQ15, C: disabled, D: 
 disabled
                 MB0: disabled, MB1:
 isa0: <ISA bus> on isab0
 atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 
 7.1 on pci0
 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
 ata0: mask=03 ostat0=50 ostat2=00
 ata0-master: ATAPI 00 00
 ata0-slave: ATAPI 00 00
 ata0: mask=03 stat0=50 stat1=00
 ata0-master: ATA 01 a5
 ata0: devices=01
 ata0: at 0x1f0 irq 14 on atapci0
 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
 ata1: at 0x170 irq 15 on atapci0
 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6100-0x611f mem 
 0xe1000000-0xe10f
 ffff,0xe1100000-0xe1100fff irq 15 at device 18.0 on pci0
 fxp0: using memory space register mapping
         using shared irq15.
 fxp0: Ethernet address 00:a0:c9:16:d5:60, 10Mbps
 fxp0: PCI IDs: 8086 1229 0000 0000 0001
 fxp0: Dynamic Standby mode is disabled
 bpf: fxp0 attached
 pci0: <Cirrus Logic GD5434 SVGA controller> (vendor=0x1013, 
 dev=0x00a8) at 19.0
 ex_isa_identify()
 ata-: ata0 exists, using next available unit number
 ata-: ata1 exists, using next available unit number
 Trying Read_Port at 203
 ADP1542: adding irq mask 0xdc00
 ADP1542: adding dma mask 0xe0
 ADP1542: start dependant
 ADP1542: adding io range 0x330-0x333, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x334-0x337, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x234-0x237, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x230-0x233, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x134-0x137, size=0x4, align=0x4
 ADP1542: start dependant
 ADP1542: adding io range 0x130-0x133, size=0x4, align=0x4
 ADP1542: end dependant
 ADP1542: adding memory range 0xc8000-0xdffff, size=0x4000, 
 align=0x4000
 isa_probe_children: disabling PnP devices
 isa_probe_children: probing non-PnP devices
 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on 
 isa0
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 ata2 failed to probe at port 0x1f0 irq 14 on isa0
 ata3 failed to probe at port 0x170 irq 15 on isa0
 adv0 failed to probe on isa0
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x330
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x334
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x230
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x234
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x130
 bt0: Failed Status Reg Test - ff
 bt_isa_probe: Probe failed at 0x134
 bt0 failed to probe at port 0x134-0x137 on isa0
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0: status reg test failed ff
 aha0 failed to probe at port 0x134-0x137 on isa0
 aic0 failed to probe at port 0x140-0x15f on isa0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 psm0: current command byte:0047
 kbdc: TEST_AUX_PORT status:0000
 kbdc: RESET_AUX return code:00fe
 kbdc: RESET_AUX return code:00fe
 kbdc: RESET_AUX return code:00fe
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 psm0: failed to reset the aux device.
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
 isa0
 fb0: vga0, vga, type:VGA (5), flags:0x7007f
 fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
 fb0: init mode:24, bios mode:3, current mode:24
 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
 VGA parameters upon power-up
 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
 VGA parameters in BIOS for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
 EGA/VGA parameters to be used for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 kbdc: DIAGNOSE status:0055
 kbdc: TEST_KBD_PORT status:0000
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x100>
 sc0: fb0, terminal emulator: sc (syscons terminal)
 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
 pcic1: not probed (disabled)
 sio0: irq maps: 0x41 0x51 0x41 0x41
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
 sio0: type 16550A, console
 sio1: irq maps: 0x41 0x49 0x41 0x41
 sio1 at port 0x2f8-0x2ff irq 3 on isa0
 sio1: type 16550A
 sio2: not probed (disabled)
 sio3: not probed (disabled)
 ppc0: parallel port found at 0x378
 ppc0: using extended I/O port range
 ppc0: ECP SPP ECP+EPP SPP
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/15 bytes threshold
 plip0: <PLIP network interface> on ppbus0
 bpf: lp0 attached
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
 fe0 failed to probe at port 0x300-0x31f on isa0
 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
 cs0 failed to probe at port 0x300-0x31f on isa0
 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
 isa_probe_children: probing PnP devices
 aha1: <Adaptec 1542/aha-1535> at port 0x330-0x333 iomem 0xcc000-
 0xcffff irq 10 d
 rq 5 on isa0
 aha1: AHA-1542CP FW Rev. F.0 (ID=46) SCSI Host Adapter, SCSI ID 7, 16 
 CCBs
 BIOS Geometries:
  0:026a3f3f 0..618=619 cylinders, 0..63=64 heads, 1..63=63 sectors
  1:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors
  2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 
 sectors
  0 accounted for
 Device configuration finished.
 bpf: faith0 attached
 bpf: lo0 attached
 bpf: ppp0 attached
 new masks: bio 68c040, tty 630098, net 678098
 bpf: sl0 attached
 IPsec: Initialized Security Association Processing.
 ad0: success setting WDMA2 on Intel chip
 Creating DISK ad0
 ar: FreeBSD check1 failed
 ad0: <Seagate Technology 1275MB - ST31276A/1.35> ATA-2 disk at ata0-
 master
 ad0: 1221MB (2501856 sectors), 2482 C, 16 H, 63 S, 512 B
 ad0: 16 secs/int, 1 depth queue, WDMA2
 ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0
 Waiting 15 seconds for SCSI devices to settle
 Creating DISK da0
 Creating DISK da1
 pass0 at aha1 bus 0 target 0 lun 0
 pass0: <SEAGATE ST32550N 0019> Fixed Direct Access SCSI-2 device
 pass0: Serial Number 01414934
 pass0: 10.000MB/s transfers (10.000MHz, offset 8)
 pass1 at aha1 bus 0 target 3 lun 0
 pass1: <COMPAQ ST19171W 9A10> Fixed Direct Access SCSI-2 device
 pass1: Serial Number LAA89359
 pass1: 10.000MB/s transfers (10.000MHz, offset 8)
 da0 at aha1 bus 0 target 0 lun 0
 da0: <SEAGATE ST32550N 0019> Fixed Direct Access SCSI-2 device
 da0: Serial Number 01414934
 da0: 10.000MB/s transfers (10.000MHz, offset 8)
 da0: 2047MB (4194058 512 byte sectors: 64H 32S/T 2047C)
 da1 at aha1 bus 0 target 3 lun 0
 da1: <COMPAQ ST19171W 9A10> Fixed Direct Access SCSI-2 device
 da1: Serial Number LAA89359
 da1: 10.000MB/s transfers (10.000MHz, offset 8)
 da1: 8678MB (17773500 512 byte sectors: 64H 32S/T 8678C)
 Mounting root from ufs:/dev/ad0s1a
 ad0s1: type 0xa5, start 63, end = 2499839, size 2499777 : OK
 start_init: trying /sbin/init
 swapon: adding /dev/ad0s1b as swap device
 Automatic boot in progress...
 /dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
 /dev/ad0s1a: clean, 6417 freed (113 frags, 788a blocks, 0.2% 
 fr1agmentation)
 s1: type 0xa5, start 63, end = 17767889, size 17767827 : OK
 /dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
 /dev/ad0s1f: clean, 647398 free (40414 frags, 75873 blocks, 3.6% 
 fragmentation)
 /dev/da1s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
 /dev/da1s1e: clean, 5907968 free (25344 frags, 735328 blocks, 0.3% 
 fragmentation
 )
 /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
 /dev/ad0s1e: clean, 17038 free (262 frags, 2097 blocks, 1.3% 
 fragmentation)
 da1s1: type 0xa5, start 63, end = 17767889, size 17767827 : OK
 Doing initial network setup: hostnameIP Filter: v3.4.29 initialized.  
 Default =
 pass all, Logging = enabled
 IP-filter module loaded.
  ipfilter.
 fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet 210.48.103.157 netmask 0xfffffff0 broadcast 
 210.48.103.159
         inet6 fe80::2a0:c9ff:fe16:d560%fxp0 prefixlen 64 tentative 
 scopeid 0x1
         ether 00:a0:c9:16:d5:60
         media: Ethernet manual
 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
         inet 127.0.0.1 netmask 0xff000000
 add net default: gateway 210.48.103.145
 Additional routing options: TCP keepalive=YES.
 Routing daemons:.
 Additional daemons: syslogd.
 Doing additional network setup: ntpd.
 Starting final network daemons:.
 ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib
 a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
 Starting standard daemons: inetd cron sshd sendmail-submit sendmail-
 clientmqueue
 .
 Initial rc.i386 initialization:.
 Configuring syscons: blanktime screensaver.
 Additional ABI support:.
 Local package initialization: cvsupd.
 Additional TCP options:.
 
 Fri Nov 15 17:00:45 NZDT 2002
 
 FreeBSD/i386 (cvsup.nz.freebsd.org) (ttyd0)
 
 login:
 
 
 
 4.6-pciconf.txt *****************************************************
 
 [dan@cvsup:/usr/home/dan] $ sudo pciconf -l
 chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x12508086 
 rev=0x03 hdr=0x00
 isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x70008086 
 rev=0x01 hdr=0x00
 atapci0@pci0:7:1:       class=0x010180 card=0x00000000 
 chip=0x70108086 rev=0x00 hdr=0x00
 fxp0@pci0:18:0: class=0x020000 card=0x00000000 chip=0x12298086 
 rev=0x01 hdr=0x00
 none0@pci0:19:0:        class=0x030000 card=0x00000000 
 chip=0x00a81013 rev=0xf9 hdr=0x00
 
 cheers
 
 -- 
 Dan Langille : http://www.langille.org/
 

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message