From owner-freebsd-current@FreeBSD.ORG Thu Sep 22 05:25:39 2005 Return-Path: X-Original-To: freebsd-current@freebsd.org Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 54ACE16A41F for ; Thu, 22 Sep 2005 05:25:39 +0000 (GMT) (envelope-from nate@root.org) Received: from ylpvm12.prodigy.net (ylpvm12-ext.prodigy.net [207.115.57.43]) by mx1.FreeBSD.org (Postfix) with ESMTP id E69FA43D45 for ; Thu, 22 Sep 2005 05:25:38 +0000 (GMT) (envelope-from nate@root.org) Received: from ylpvm01.prodigy.net (ylpvm01-int.prodigy.net [207.115.5.207]) by ylpvm12.prodigy.net (8.12.10 outbound/8.12.10) with ESMTP id j8M5PT0X007633 for ; Thu, 22 Sep 2005 01:25:29 -0400 X-ORBL: [71.139.46.176] Received: from [10.0.5.50] (ppp-71-139-46-176.dsl.snfc21.pacbell.net [71.139.46.176]) by ylpvm01.prodigy.net (8.13.4 dk-milter linux/8.13.4) with ESMTP id j8M5PDDh021003 for ; Thu, 22 Sep 2005 01:25:13 -0400 Message-ID: <43324049.6000307@root.org> Date: Wed, 21 Sep 2005 22:25:29 -0700 From: Nate Lawson User-Agent: Mozilla Thunderbird 1.0.6 (X11/20050723) X-Accept-Language: en-us, en MIME-Version: 1.0 To: FreeBSD Current Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: an(4) timeouts after a while? X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Sep 2005 05:25:39 -0000 I use an Aironet 340 card in my laptop, running 7-current. It will run fine for 30-40 minutes and then suddenly timeout. Ejecting and reinserting fixes this. It may only happen after a suspend/resume, even if the suspend/resume was before the card was first inserted. Here's what I get on insertion: an0: at port 0x2000-0x203f irq 11 function 0 config 5 on pccard1 an0: record length mismatch -- expected 192, got 200 for Rid ff00 an0: got RSSI <-> dBM map an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps an0: Ethernet address: 00:40:xxxxx an0: [GIANT-LOCKED] When net connections start hanging, this is ifconfig: an0: flags=8843 mtu 1500 inet6 fe80::xx:xx:xx:xx%an0 prefixlen 64 scopeid 0x4 inet 10.0.xx.xx netmask 0xffffff00 broadcast 10.0.xx.255 ether 00:40:xx:xx:xx:xx media: IEEE 802.11 Wireless Ethernet autoselect status: no carrier ssid 1:myssid channel 6 stationname "" authmode OPEN privacy ON deftxkey 1 txpowmax 0 rtsthreshold 0 roaming DEVICE And dmesg says: an0: xmit failed an0: device timeout Then I eject the card: an0: RID access failed an0: RID access failed an0: detached cbb1: Bad Vcc requested Interrupt storm detected on "irq11: pcm0 cbb0+++"; throttling interrupt source cbb1: Bad Vcc requested And then reinsert: an0: at port 0x2000-0x203f irq 11 function 0 config 5 on pccard1 an0: record length mismatch -- expected 192, got 200 for Rid ff00 an0: got RSSI <-> dBM map an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps an0: Ethernet address: 00:40:xxxxx an0: [GIANT-LOCKED] -- Nate