Date: Wed, 8 Feb 2017 14:19:31 -0000 From: "Thomas Sparrevohn" <Thomas.Sparrevohn@btinternet.com> To: "'Ronald Klop'" <ronald-lists@klop.ws>, "'FreeBSD Current'" <FreeBSD-current@freebsd.org> Subject: RE: gptzfsboot trouble Message-ID: <000501d28216$5f6e9620$1e4bc260$@btinternet.com> In-Reply-To: <op.yvcdz2xmkndu52@53556c9c.cm-6-6b.dynamic.ziggo.nl> References: <000d01d2815c$74f1be60$5ed53b20$@btinternet.com> <op.yvccuojgkndu52@53556c9c.cm-6-6b.dynamic.ziggo.nl> <002201d28208$85492bc0$8fdb8340$@btinternet.com> <op.yvcdz2xmkndu52@53556c9c.cm-6-6b.dynamic.ziggo.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multipart message in MIME format. ------=_NextPart_000_0006_01D28216.5F6F0B50 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Ok Basic data included -----Original Message----- From: Ronald Klop [mailto:ronald-lists@klop.ws]=20 Sent: 08 February 2017 12:51 To: Thomas Sparrevohn <Thomas.Sparrevohn@btinternet.com>; FreeBSD = Current <FreeBSD-current@freebsd.org> Subject: Re: gptzfsboot trouble On Wed, 08 Feb 2017 13:40:25 +0100, Thomas Sparrevohn = <Thomas.Sparrevohn@btinternet.com> wrote: > > The bug in the bugzilla could be related - what is weird is I have = been =20 > running this setup for years without issues - which I guess just shows = =20 > how good ye'ol FreeBSD still is ;-) Tried to run through the svn log = but =20 > could not immediately see anything that seemed to be related I was triggered on that bugzilla issue because of the wrong lba number. > Would the photos of the screen help? Everything helps. NB: please keep the mailinglist in the address list. There are more =20 knowledgeable people there. Ronald. > -----Original Message----- > From: Ronald Klop [mailto:ronald-lists@klop.ws] > Sent: 08 February 2017 12:27 > To: FreeBSD-current@freebsd.org; Thomas Sparrevohn =20 > <Thomas.Sparrevohn@btinternet.com> > Subject: Re: gptzfsboot trouble > > On Tue, 07 Feb 2017 17:08:44 +0100, Thomas Sparrevohn =20 > <Thomas.Sparrevohn@btinternet.com> wrote: > >> Hi all >> >> >> Last week I decided to upgrade my FreeBSD installation - it's been a >> while (September 16 was last time). Unfortunately CURRENT does not >> boot and cash in a weird way. Both 11-RELEASE and 12 CURRENT boot >> loader seems to attempt to read blocks that exceeds the physical = disk. >> Initially I through it was a hard disk error - but after a "oh" >> experience I realised that the >> "gptzfsboot: error 4 lba 921592" is actually beyond the physical >> boundaries of the disk (300GB disk). In order to rule out different >> options - I installed a vanilla 11-RELEASE on the 300G with a simple >> stripe - it also gives the error but does boot - the LBA of the error >> is slightly different on 11 CURRENT and comes up with LBA 921600 >> >> >> I have scanned all the disks for physical faults and there seems to = be >> none and I have tried doing a single disk installation on each disk - >> they give the same error - Does anybody have any idea? Included = Photos >> as sometimes it get through to the actual boot menu but then crash in >> another place >> >> >> I have some images - but they are 2 bit for the mailing list ;-) > > > Can it be related to this issue? > https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D144234 > > Would be nice if you tell more about the system. CPU? dmesg? > The 11-RELEASE did that boot from the same disk? In the mentioned = issue =20 > there is the case that gptzfsboot does recognize a secondary disk (can = =20 > be configured as mirror), but not the first. > > As you say UFS works, the bug might be in the gptzfsboot code, because = =20 > that is not used for UFS. > > Regards, > Ronald. ------=_NextPart_000_0006_01D28216.5F6F0B50 Content-Type: application/octet-stream; name="camcontrol_devlist" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="camcontrol_devlist" <TSSTcorp DVD+-RW TS-H653G DW10> at scbus0 target 0 lun 0 (cd0,pass0)=0A= <Samsung SSD 840 EVO 250GB EXT0BB6Q> at scbus5 target 0 lun 0 = (pass1,ada0)=0A= <Hitachi HDP725032GLA360 GM3OA52A> at scbus6 target 0 lun 0 (pass2,ada1)=0A= <SAMSUNG HD642JJ 1AA01117> at scbus7 target 0 lun 0 (pass3,ada2)=0A= <Hitachi HDP725032GLA360 GM3OA52A> at scbus8 target 0 lun 0 (pass4,ada3)=0A= <SAMSUNG HD642JJ 1AA01117> at scbus9 target 0 lun 0 (pass5,ada4)=0A= <Hitachi HDP725032GLA360 GM3OA5CA> at scbus10 target 0 lun 0 = (pass6,ada5)=0A= <AHCI SGPIO Enclosure 1.00 0001> at scbus11 target 0 lun 0 (pass7,ses0)=0A= <Innostor Innostor 1.00> at scbus12 target 0 lun 0 (da0,pass8)=0A= <WD My Passport 0820 1012> at scbus13 target 0 lun 0 (da2,pass10)=0A= <WD SES Device 1012> at scbus13 target 0 lun 1 = (ses1,pass11)=0A= <TOSHIBA MK1059GSM GU00> at scbus14 target 0 lun 0 (da1,pass9)=0A= ------=_NextPart_000_0006_01D28216.5F6F0B50 Content-Type: application/octet-stream; name="camcontrol_identify" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="camcontrol_identify" pass2: <Hitachi HDP725032GLA360 GM3OA52A> ATA8-ACS SATA 2.x device=0A= pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)=0A= =0A= protocol ATA/ATAPI-8 SATA 2.x=0A= device model Hitachi HDP725032GLA360=0A= firmware revision GM3OA52A=0A= serial number GEB030RG03EZZH=0A= WWN 5000cca32bc191aa=0A= cylinders 16383=0A= heads 16=0A= sectors/track 63=0A= sector size logical 512, physical 512, offset 0=0A= LBA supported 268435455 sectors=0A= LBA48 supported 625142448 sectors=0A= PIO supported PIO4=0A= DMA supported WDMA2 UDMA6 =0A= media RPM 7200=0A= =0A= Feature Support Enabled Value Vendor=0A= read ahead yes yes=0A= write cache yes yes=0A= flush cache yes yes=0A= overlap no=0A= Tagged Command Queuing (TCQ) no no=0A= Native Command Queuing (NCQ) yes 32 tags=0A= NCQ Queue Management no=0A= NCQ Streaming no=0A= Receive & Send FPDMA Queued no=0A= SMART yes yes=0A= microcode download yes yes=0A= security yes no=0A= power management yes yes=0A= advanced power management yes no 0/0x00=0A= automatic acoustic management yes yes 254/0xFE 128/0x80=0A= media status notification no no=0A= power-up in Standby yes no=0A= write-read-verify no no=0A= unload no no=0A= general purpose logging yes yes=0A= free-fall no no=0A= Data Set Management (DSM/TRIM) no=0A= Host Protected Area (HPA) yes no 625142448/625142448=0A= HPA - Security no=0A= ------=_NextPart_000_0006_01D28216.5F6F0B50 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Waiting (max 60 seconds) for system process `vnlru' to stop... done=0A= Waiting (max 60 seconds) for system process `bufdaemon' to stop... done=0A= Waiting (max 60 seconds) for system process `syncer' to stop... =0A= Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 0 0 0 0 done=0A= All buffers synced.=0A= Copyright (c) 1992-2016 The FreeBSD Project.=0A= Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A= The Regents of the University of California. All rights reserved.=0A= FreeBSD is a registered trademark of The FreeBSD Foundation.=0A= FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 01:43:23 UTC 2016=0A= root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64=0A= FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on = LLVM 3.8.0)=0A= VT(vga): resolution 640x480=0A= CPU: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz (3208.03-MHz = K8-class CPU)=0A= Origin=3D"GenuineIntel" Id=3D0x106a5 Family=3D0x6 Model=3D0x1a = Stepping=3D5=0A= = Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A= = Features2=3D0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,P= DCM,SSE4.1,SSE4.2,POPCNT>=0A= AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>=0A= AMD Features2=3D0x1<LAHF>=0A= VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID=0A= TSC: P-state invariant, performance statistics=0A= real memory =3D 12884901888 (12288 MB)=0A= avail memory =3D 12401463296 (11826 MB)=0A= Event timer "LAPIC" quality 400=0A= ACPI APIC Table: <ALWARE ALIENWRE>=0A= FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs=0A= FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads=0A= random: unblocking device.=0A= ioapic0 <Version 2.0> irqs 0-23 on motherboard=0A= random: entropy device external interface=0A= kbd1 at kbdmux0=0A= netmap: loaded module=0A= module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19=0A= vtvga0: <VT VGA driver> on motherboard=0A= cryptosoft0: <software crypto> on motherboard=0A= acpi0: <ALWARE ALIENWRE> on motherboard=0A= acpi0: Power Button (fixed)=0A= cpu0: <ACPI CPU> on acpi0=0A= cpu1: <ACPI CPU> on acpi0=0A= cpu2: <ACPI CPU> on acpi0=0A= cpu3: <ACPI CPU> on acpi0=0A= cpu4: <ACPI CPU> on acpi0=0A= cpu5: <ACPI CPU> on acpi0=0A= cpu6: <ACPI CPU> on acpi0=0A= cpu7: <ACPI CPU> on acpi0=0A= attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0=0A= Timecounter "i8254" frequency 1193182 Hz quality 0=0A= Event timer "i8254" frequency 1193182 Hz quality 100=0A= atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0=0A= Event timer "RTC" frequency 32768 Hz quality 0=0A= hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0=0A= Timecounter "HPET" frequency 14318180 Hz quality 950=0A= Event timer "HPET" frequency 14318180 Hz quality 350=0A= Event timer "HPET1" frequency 14318180 Hz quality 340=0A= Event timer "HPET2" frequency 14318180 Hz quality 340=0A= Event timer "HPET3" frequency 14318180 Hz quality 340=0A= Timecounter "ACPI-fast" frequency 3579545 Hz quality 900=0A= acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0=0A= pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=0A= pci0: <ACPI PCI bus> on pcib0=0A= pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0=0A= pci1: <ACPI PCI bus> on pcib1=0A= pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0=0A= pci2: <ACPI PCI bus> on pcib2=0A= vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem = 0xd0000000-0xdfffffff,0xcf800000-0xcfffffff,0xfbc00000-0xfbc3ffff irq 16 = at device 0.0 on pci2=0A= vgapci0: Boot video device=0A= hdac0: <ATI (0xaac8) HDA Controller> mem 0xfbe00000-0xfbe03fff irq 17 at = device 0.1 on pci2=0A= pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0=0A= pci3: <ACPI PCI bus> on pcib3=0A= pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0=0A= pci4: <ACPI PCI bus> on pcib4=0A= pci0: <base peripheral, interrupt controller> at device 20.0 (no driver = attached)=0A= pci0: <base peripheral, interrupt controller> at device 20.1 (no driver = attached)=0A= pci0: <base peripheral, interrupt controller> at device 20.2 (no driver = attached)=0A= pci0: <base peripheral, interrupt controller> at device 20.3 (no driver = attached)=0A= uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xa400-0xa41f = irq 16 at device 26.0 on pci0=0A= uhci0: LegSup =3D 0x2f00=0A= usbus0 on uhci0=0A= uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xa480-0xa49f = irq 21 at device 26.1 on pci0=0A= uhci1: LegSup =3D 0x2f00=0A= usbus1 on uhci1=0A= uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xa800-0xa81f = irq 19 at device 26.2 on pci0=0A= uhci2: LegSup =3D 0x2f00=0A= usbus2 on uhci2=0A= ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem = 0xf9e00000-0xf9e003ff irq 18 at device 26.7 on pci0=0A= usbus3: EHCI version 1.0=0A= usbus3 on ehci0=0A= hdac1: <Intel 82801JI HDA Controller> mem 0xfa000000-0xfa003fff irq 22 = at device 27.0 on pci0=0A= pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0=0A= pcib5: [GIANT-LOCKED]=0A= pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0=0A= pcib6: [GIANT-LOCKED]=0A= pci5: <ACPI PCI bus> on pcib6=0A= bge0: <Broadcom NetLink Gigabit Ethernet Controller , ASIC rev. = 0x5784100> mem 0xfb800000-0xfb80ffff irq 17 at device 0.0 on pci5=0A= bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E=0A= miibus0: <MII bus> on bge0=0A= brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0=0A= brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow=0A= bge0: Using defaults for TSO: 65518/35/2048=0A= bge0: Ethernet address: a4:ba:db:02:6f:a2=0A= pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0=0A= pcib7: [GIANT-LOCKED]=0A= pci6: <ACPI PCI bus> on pcib7=0A= bge1: <Broadcom NetLink Gigabit Ethernet Controller , ASIC rev. = 0x5784100> mem 0xfb600000-0xfb60ffff irq 18 at device 0.0 on pci6=0A= bge1: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E=0A= miibus1: <MII bus> on bge1=0A= brgphy1: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus1=0A= brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow=0A= bge1: Using defaults for TSO: 65518/35/2048=0A= bge1: Ethernet address: a4:ba:db:02:6f:a1=0A= pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0=0A= pcib8: [GIANT-LOCKED]=0A= pci7: <ACPI PCI bus> on pcib8=0A= atapci0: <JMicron JMB363 UDMA133 controller> port = 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f = mem 0xfb200000-0xfb201fff irq 19 at device 0.0 on pci7=0A= ahci0: <JMicron JMB363 AHCI SATA controller> at channel -1 on atapci0=0A= ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported=0A= ahci0: quirks=3D0x1<NOFORCE>=0A= ahcich0: <AHCI channel> at channel 0 on ahci0=0A= ahcich1: <AHCI channel> at channel 1 on ahci0=0A= ata2: <ATA channel> at channel 0 on atapci0=0A= pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0=0A= pcib9: [GIANT-LOCKED]=0A= pci8: <ACPI PCI bus> on pcib9=0A= siis0: <SiI3132 SATA controller> port 0xcc00-0xcc7f mem = 0xfb000000-0xfb00007f,0xfae00000-0xfae03fff irq 17 at device 0.0 on pci8=0A= siisch0: <SIIS channel> at channel 0 on siis0=0A= siisch1: <SIIS channel> at channel 1 on siis0=0A= uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xa880-0xa89f = irq 23 at device 29.0 on pci0=0A= uhci3: LegSup =3D 0x2f00=0A= usbus4 on uhci3=0A= uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xac00-0xac1f = irq 19 at device 29.1 on pci0=0A= uhci4: LegSup =3D 0x2f00=0A= usbus5 on uhci4=0A= uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb000-0xb01f = irq 18 at device 29.2 on pci0=0A= uhci5: LegSup =3D 0x2f00=0A= usbus6 on uhci5=0A= ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem = 0xfa200000-0xfa2003ff irq 23 at device 29.7 on pci0=0A= usbus7: EHCI version 1.0=0A= usbus7 on ehci1=0A= pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0=0A= pci9: <ACPI PCI bus> on pcib10=0A= pci9: <serial bus, FireWire> at device 2.0 (no driver attached)=0A= isab0: <PCI-ISA bridge> at device 31.0 on pci0=0A= isa0: <ISA bus> on isab0=0A= ahci1: <Intel ICH10 AHCI SATA controller> port = 0xb880-0xb887,0xb800-0xb803,0xb480-0xb487,0xb400-0xb403,0xb080-0xb09f = mem 0xfa400000-0xfa4007ff irq 19 at device 31.2 on pci0=0A= ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported=0A= ahcich2: <AHCI channel> at channel 0 on ahci1=0A= ahcich3: <AHCI channel> at channel 1 on ahci1=0A= ahcich4: <AHCI channel> at channel 2 on ahci1=0A= ahcich5: <AHCI channel> at channel 3 on ahci1=0A= ahcich6: <AHCI channel> at channel 4 on ahci1=0A= ahcich7: <AHCI channel> at channel 5 on ahci1=0A= ahciem0: <AHCI enclosure management bridge> on ahci1=0A= acpi_button0: <Power Button> on acpi0=0A= qpi0: <QPI system bus> on motherboard=0A= pcib11: <QPI Host-PCI bridge> pcibus 255 on qpi0=0A= pci10: <PCI bus> on pcib11=0A= orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0=0A= atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A= atkbd0: <AT Keyboard> irq 1 on atkbdc0=0A= kbd0 at atkbd0=0A= atkbd0: [GIANT-LOCKED]=0A= ppc0: cannot reserve I/O port range=0A= uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0=0A= est0: <Enhanced SpeedStep Frequency Control> on cpu0=0A= est1: <Enhanced SpeedStep Frequency Control> on cpu1=0A= est2: <Enhanced SpeedStep Frequency Control> on cpu2=0A= est3: <Enhanced SpeedStep Frequency Control> on cpu3=0A= est4: <Enhanced SpeedStep Frequency Control> on cpu4=0A= est5: <Enhanced SpeedStep Frequency Control> on cpu5=0A= est6: <Enhanced SpeedStep Frequency Control> on cpu6=0A= est7: <Enhanced SpeedStep Frequency Control> on cpu7=0A= usbus0: 12Mbps Full Speed USB v1.0=0A= ZFS filesystem version: 5=0A= ZFS storage pool version: features support (5000)=0A= Timecounters tick every 1.000 msec=0A= nvme cam probe device init=0A= hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0=0A= hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0=0A= pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0=0A= pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0=0A= pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0=0A= pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0=0A= pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0=0A= pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0=0A= hdacc1: <Realtek ALC1200 HDA CODEC> at cad 0 on hdac1=0A= hdaa1: <Realtek ALC1200 Audio Function Group> at nid 1 on hdacc1=0A= pcm6: <Realtek ALC1200 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and = 24,25,26 on hdaa1=0A= pcm7: <Realtek ALC1200 (Digital)> at nid 30 on hdaa1=0A= pcm8: <Realtek ALC1200 (Rear Digital)> at nid 17 on hdaa1=0A= usbus1: 12Mbps Full Speed USB v1.0=0A= usbus2: 12Mbps Full Speed USB v1.0=0A= ugen0.1: <Intel> at usbus0=0A= uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0=0A= ugen1.1: <Intel> at usbus1=0A= uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1=0A= ugen2.1: <Intel> at usbus2=0A= uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2=0A= usbus3: 480Mbps High Speed USB v2.0=0A= usbus4: 12Mbps Full Speed USB v1.0=0A= usbus5: 12Mbps Full Speed USB v1.0=0A= ugen3.1: <Intel> at usbus3=0A= uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3=0A= ugen4.1: <Intel> at usbus4=0A= uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4=0A= ugen5.1: <Intel> at usbus5=0A= uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5=0A= usbus6: 12Mbps Full Speed USB v1.0=0A= usbus7: 480Mbps High Speed USB v2.0=0A= ugen6.1: <Intel> at usbus6=0A= uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6=0A= ugen7.1: <Intel> at usbus7=0A= uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7=0A= uhub0: 2 ports with 2 removable, self powered=0A= uhub1: 2 ports with 2 removable, self powered=0A= uhub2: 2 ports with 2 removable, self powered=0A= uhub4: 2 ports with 2 removable, self powered=0A= uhub5: 2 ports with 2 removable, self powered=0A= uhub6: 2 ports with 2 removable, self powered=0A= ses0 at ahciem0 bus 0 scbus11 target 0 lun 0=0A= ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device=0A= ses0: SEMB SES Device=0A= ada0 at ahcich2 bus 0 scbus5 target 0 lun 0=0A= ada0: <Samsung SSD 840 EVO 250GB EXT0BB6Q> ACS-2 ATA SATA 3.x device=0A= ada0: Serial Number S1DFNEAD904333V=0A= ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)=0A= ada0: Command Queueing enabled=0A= ada0: 238475MB (488397168 512 byte sectors)=0A= ada0: quirks=3D0x3<4K,NCQ_TRIM_BROKEN>=0A= ada1 at ahcich3 bus 0 scbus6 target 0 lun 0=0A= ada1: <Hitachi HDP725032GLA360 GM3OA52A> ATA8-ACS SATA 2.x device=0A= ada1: Serial Number GEB030RG03EZZH=0A= ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)=0A= ada1: Command Queueing enabled=0A= ada1: 305245MB (625142448 512 byte sectors)=0A= ada2 at ahcich4 bus 0 scbus7 target 0 lun 0=0A= ada2: <SAMSUNG HD642JJ 1AA01117> ATA-7 SATA 2.x device=0A= ada2: Serial Number S1JNJ90Z104658=0A= ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)=0A= ada2: Command Queueing enabled=0A= ada2: 610480MB (1250263728 512 byte sectors)=0A= ada3 at ahcich5 bus 0 scbus8 target 0 lun 0=0A= ada3: <Hitachi HDP725032GLA360 GM3OA52A> ATA8-ACS SATA 2.x device=0A= ada3: Serial Number GEB330RC0ASTSF=0A= ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)=0A= ada3: Command Queueing enabled=0A= ada3: 305245MB (625142448 512 byte sectors)=0A= ada4 at ahcich6 bus 0 scbus9 target 0 lun 0=0A= ada4: <SAMSUNG HD642JJ 1AA01117> ATA-7 SATA 2.x device=0A= ada4: Serial Number S1JNJ90Z104652=0A= ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)=0A= ada4: Command Queueing enabled=0A= ada4: 610480MB (1250263728 512 byte sectors)=0A= ada5 at ahcich7 bus 0 scbus10 target 0 lun 0=0A= ada5: <Hitachi HDP725032GLA360 GM3OA5CA> ATA8-ACS SATA 2.x device=0A= ada5: Serial Number GECR34RF20X7LE=0A= ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)=0A= ada5: Command Queueing enabled=0A= ada5: 305245MB (625142448 512 byte sectors)=0A= SMP: AP CPU #1 Launched!=0A= SMP: AP CPU #3 Launched!=0A= SMP: AP CPU #4 Launched!=0A= SMP: AP CPU #2 Launched!=0A= SMP: AP CPU #5 Launched!=0A= SMP: AP CPU #6 Launched!=0A= SMP: AP CPU #7 Launched!=0A= cd0 at ahcich0 bus 0 scbus0 target 0 lun 0=0A= cd0: <TSSTcorp DVD+-RW TS-H653G DW10> Removable CD-ROM SCSI device=0A= cd0: Serial Number R4606GFZ14166700=0A= cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO = 8192bytes)=0A= cd0: Attempt to query device size failed: NOT READY, Medium not present = - tray closed=0A= Timecounter "TSC-low" frequency 1604016454 Hz quality 1000=0A= Trying to mount root from zfs:zroot/ROOT/default []...=0A= Root mount waiting for: usbus7 usbus3=0A= Root mount waiting for: usbus7 usbus3=0A= uhub3: 6 ports with 6 removable, self powered=0A= uhub7: 6 ports with 6 removable, self powered=0A= Root mount waiting for: usbus7 usbus3=0A= ugen3.2: <vendor 0x04b4> at usbus3=0A= uhub8: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2> = on usbus3=0A= Root mount waiting for: usbus7 usbus3=0A= uhub8: 4 ports with 4 removable, self powered=0A= ugen5.2: <Logitech> at usbus5=0A= ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 2> on = usbus5=0A= ugen0.2: <Alienware> at usbus0=0A= kbd2 at ukbd0=0A= ugen7.2: <Innostor> at usbus7=0A= umass0: <Innostor PenDrive, class 0/0, rev 2.10/0.01, addr 2> on usbus7=0A= umass0: SCSI over Bulk-Only; quirks =3D 0x8100=0A= umass0:12:0: Attached to scbus12=0A= da0 at umass-sim0 bus 0 scbus12 target 0 lun 0=0A= da0: <Innostor Innostor 1.00> Removable Direct Access SPC-4 SCSI device=0A= da0: Serial Number AC220B7F2408000000000000000665=0A= da0: 40.000MB/s transfers=0A= da0: 29620MB (60661760 512 byte sectors)=0A= da0: quirks=3D0x12<NO_6_BYTE,NO_RC16>=0A= ugen3.3: <Broadcom> at usbus3=0A= uhub9: <Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 3> on usbus3=0A= uhub9: 3 ports with 0 removable, self powered=0A= Root mount waiting for: usbus3=0A= ugen3.4: <vendor 0x413c> at usbus3=0A= ukbd1: <vendor 0x413c product 0x8161, class 0/0, rev 2.00/1.00, addr 4> = on usbus3=0A= kbd3 at ukbd1=0A= ugen3.5: <vendor 0x413c> at usbus3=0A= Root mount waiting for: usbus3=0A= ugen3.6: <vendor 0x05ac> at usbus3=0A= uhub10: <vendor 0x05ac product 0x912f, class 9/0, rev 2.00/1.01, addr 6> = on usbus3=0A= uhub10: MTT enabled=0A= Root mount waiting for: usbus3=0A= uhub10: 3 ports with 2 removable, self powered=0A= Root mount waiting for: usbus3=0A= Root mount waiting for: usbus3=0A= Root mount waiting for: usbus3=0A= Root mount waiting for: usbus3=0A= ugen3.7: <Western Digital> at usbus3=0A= umass1: <Western Digital My Passport 0820, class 0/0, rev 2.10/10.12, = addr 7> on usbus3=0A= umass1: SCSI over Bulk-Only; quirks =3D 0xc001=0A= umass1:13:1: Attached to scbus13=0A= ugen3.8: <vendor 0x05ac> at usbus3=0A= Root mount waiting for: usbus3=0A= Root mount waiting for: usbus3=0A= ugen3.9: <LaCie> at usbus3=0A= umass2: <LaCie P9221 Mobile Drive, class 0/0, rev 2.00/0.06, addr 9> on = usbus3=0A= umass2: SCSI over Bulk-Only; quirks =3D 0x8100=0A= umass2:14:2: Attached to scbus14=0A= (probe1:umass-sim2:2:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 = 10 00 00 =0A= (probe1:umass-sim2:2:0:0): CAM status: SCSI Status Error=0A= (probe1:umass-sim2:2:0:0): SCSI status: Check Condition=0A= (probe1:umass-sim2:2:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid = command operation code)=0A= (probe1:umass-sim2:2:0:0): Error 22, Unretryable error=0A= da1 at umass-sim2 bus 2 scbus14 target 0 lun 0=0A= da1: <TOSHIBA MK1059GSM GU00> Fixed Direct Access SPC-3 SCSI device=0A= da1: Serial Number 00000000e4ed3c7b20df=0A= da1: 40.000MB/s transfers=0A= da1: 953869MB (1953525168 512 byte sectors)=0A= da1: quirks=3D0x2<NO_6_BYTE>=0A= da2 at umass-sim1 bus 1 scbus13 target 0 lun 0=0A= da2: <WD My Passport 0820 1012> Fixed Direct Access SPC-4 SCSI device=0A= da2: Serial Number 575831314142343255325654=0A= da2: 40.000MB/s transfers=0A= da2: 953837MB (1953458176 512 byte sectors)=0A= da2: quirks=3D0x2<NO_6_BYTE>=0A= ses1 at umass-sim1 bus 1 scbus13 target 0 lun 1=0A= ses1: <WD SES Device 1012> Fixed Enclosure Services SPC-4 SCSI device=0A= ses1: Serial Number 575831314142343255325654=0A= ses1: 40.000MB/s transfers=0A= ses1: SCSI-3 ENC Device=0A= bge0: link state changed to DOWN=0A= bge0: link state changed to UP=0A= uhid0: <Alienware Gaming Desktop, class 0/0, rev 2.00/0.00, addr 2> on = usbus0=0A= uhid1: <vendor 0x05ac product 0x9221, class 0/0, rev 1.10/1.15, addr 8> = on usbus3=0A= uhid2: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 2> on = usbus5=0A= ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.01, addr 2> on = usbus5=0A= ums1: <vendor 0x413c product 0x8162, class 0/0, rev 2.00/1.00, addr 5> = on usbus3=0A= ums1: 3 buttons and [XY] coordinates ID=3D2=0A= ums0: 16 buttons and [XYZT] coordinates ID=3D2=0A= ------=_NextPart_000_0006_01D28216.5F6F0B50 Content-Type: application/octet-stream; name="gpart.list.ada1" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="gpart.list.ada1" Geom name: ada1=0A= modified: false=0A= state: OK=0A= fwheads: 16=0A= fwsectors: 63=0A= last: 625142407=0A= first: 40=0A= entries: 152=0A= scheme: GPT=0A= Providers:=0A= 1. Name: ada1p1=0A= Mediasize: 524288 (512K)=0A= Sectorsize: 512=0A= Stripesize: 0=0A= Stripeoffset: 20480=0A= Mode: r0w0e0=0A= rawuuid: 6b80da2c-ee00-11e6-ba10-a4badb026fa2=0A= rawtype: 83bd6b9d-7f41-11dc-be0b-001560b84f0f=0A= label: gptboot0=0A= length: 524288=0A= offset: 20480=0A= type: freebsd-boot=0A= index: 1=0A= end: 1063=0A= start: 40=0A= 2. Name: ada1p2=0A= Mediasize: 2147483648 (2.0G)=0A= Sectorsize: 512=0A= Stripesize: 0=0A= Stripeoffset: 1048576=0A= Mode: r1w1e0=0A= rawuuid: 6ba4e4bf-ee00-11e6-ba10-a4badb026fa2=0A= rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b=0A= label: swap0=0A= length: 2147483648=0A= offset: 1048576=0A= type: freebsd-swap=0A= index: 2=0A= end: 4196351=0A= start: 2048=0A= 3. Name: ada1p3=0A= Mediasize: 317924048896 (296G)=0A= Sectorsize: 512=0A= Stripesize: 0=0A= Stripeoffset: 2148532224=0A= Mode: r1w1e1=0A= rawuuid: 6bc4642f-ee00-11e6-ba10-a4badb026fa2=0A= rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b=0A= label: zfs0=0A= length: 317924048896=0A= offset: 2148532224=0A= type: freebsd-zfs=0A= index: 3=0A= end: 625141759=0A= start: 4196352=0A= Consumers:=0A= 1. Name: ada1=0A= Mediasize: 320072933376 (298G)=0A= Sectorsize: 512=0A= Mode: r2w2e3=0A= =0A= ------=_NextPart_000_0006_01D28216.5F6F0B50 Content-Type: application/octet-stream; name="gpart.show.ada1" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="gpart.show.ada1" =3D> 40 625142368 ada1 GPT (298G)=0A= 40 1024 1 freebsd-boot (512K)=0A= 1064 984 - free - (492K)=0A= 2048 4194304 2 freebsd-swap (2.0G)=0A= 4196352 620945408 3 freebsd-zfs (296G)=0A= 625141760 648 - free - (324K)=0A= =0A= ------=_NextPart_000_0006_01D28216.5F6F0B50--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000501d28216$5f6e9620$1e4bc260$>