Date: Tue, 4 May 2010 13:15:14 -0600 From: Scott Long <scottl@samsco.org> To: Per olof Ljungmark <peo@intersonic.se> Cc: freebsd-scsi@freebsd.org Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller Message-ID: <DA23138F-583D-40D0-8004-7C4273F73D2A@samsco.org> In-Reply-To: <4BE06F10.5080904@intersonic.se> References: <201005041800.o44I08d4017511@freefall.freebsd.org> <E860C0FC-EB64-4001-9BE4-C74075DB0D57@samsco.org> <4BE06F10.5080904@intersonic.se>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks. I see 2 ILO devices, 1 CISS device, and a handful of other = various PCI bridges and devices. Either your extra missing controllers = are on an exotic topology that freebsd can't probe, or there is some = other kind of confusion. Either way, FreeBSD itself doesn't see any = trace of them. Scott On May 4, 2010, at 1:01 PM, Per olof Ljungmark wrote: >>=20 >>=20 >=20 > Yes, there is zero problem with the first, the 6i: >=20 > pciconf -lv > hostb0@pci0:0:0:0: class=3D0x060000 card=3D0x32000e11 = chip=3D0x35908086 > rev=3D0x0c hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D 'E7520 Server Memory Controller Hub' > class =3D bridge > subclass =3D HOST-PCI > pcib1@pci0:0:2:0: class=3D0x060400 card=3D0x00000000 = chip=3D0x35958086 > rev=3D0x0c hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D 'E752x Memory Controller Hub PCIe Port A0' > class =3D bridge > subclass =3D PCI-PCI > pcib4@pci0:0:6:0: class=3D0x060400 card=3D0x00000000 = chip=3D0x35998086 > rev=3D0x0c hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D 'E752x Memory Controller Hub PCIe Port C0' > class =3D bridge > subclass =3D PCI-PCI > uhci0@pci0:0:29:0: class=3D0x0c0300 card=3D0x32010e11 = chip=3D0x24d28086 > rev=3D0x02 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *1' > class =3D serial bus > subclass =3D USB > uhci1@pci0:0:29:1: class=3D0x0c0300 card=3D0x32010e11 = chip=3D0x24d48086 > rev=3D0x02 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *2' > class =3D serial bus > subclass =3D USB > uhci2@pci0:0:29:2: class=3D0x0c0300 card=3D0x32010e11 = chip=3D0x24d78086 > rev=3D0x02 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *3' > class =3D serial bus > subclass =3D USB > uhci3@pci0:0:29:3: class=3D0x0c0300 card=3D0x32010e11 = chip=3D0x24de8086 > rev=3D0x02 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *4' > class =3D serial bus > subclass =3D USB > ehci0@pci0:0:29:7: class=3D0x0c0320 card=3D0x32010e11 = chip=3D0x24dd8086 > rev=3D0x02 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller' > class =3D serial bus > subclass =3D USB > pcib8@pci0:0:30:0: class=3D0x060400 card=3D0x00000000 = chip=3D0x244e8086 > rev=3D0xc2 hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub > Interface to PCI Bridge' > class =3D bridge > subclass =3D PCI-PCI > isab0@pci0:0:31:0: class=3D0x060100 card=3D0x00000000 = chip=3D0x24d08086 > rev=3D0x02 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge' > class =3D bridge > subclass =3D PCI-ISA > atapci0@pci0:0:31:1: class=3D0x01018a card=3D0x32010e11 = chip=3D0x24db8086 > rev=3D0x02 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801EB/ER (ICH5/ICH5R) EIDE Controller' > class =3D mass storage > subclass =3D ATA > pcib2@pci0:2:0:0: class=3D0x060400 card=3D0x00000000 = chip=3D0x03298086 > rev=3D0x09 hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D 'PCI Express-to-PCI Express Bridge A (6700PXH)' > class =3D bridge > subclass =3D PCI-PCI > pcib3@pci0:2:0:2: class=3D0x060400 card=3D0x00000000 = chip=3D0x032a8086 > rev=3D0x09 hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D 'PCI Express-to-PCI Express Bridge B (6700PXH)' > class =3D bridge > subclass =3D PCI-PCI > bge0@pci0:3:1:0: class=3D0x020000 card=3D0x00d00e11 = chip=3D0x164814e4 > rev=3D0x10 hdr=3D0x00 > vendor =3D 'Broadcom Corporation' > device =3D 'NetXtreme Dual Gigabit Adapter (BCM5704)' > class =3D network > subclass =3D ethernet > bge1@pci0:3:1:1: class=3D0x020000 card=3D0x00d00e11 = chip=3D0x164814e4 > rev=3D0x10 hdr=3D0x00 > vendor =3D 'Broadcom Corporation' > device =3D 'NetXtreme Dual Gigabit Adapter (BCM5704)' > class =3D network > subclass =3D ethernet > ciss0@pci0:4:3:0: class=3D0x010400 card=3D0x40910e11 = chip=3D0x00460e11 > rev=3D0x01 hdr=3D0x00 > vendor =3D 'Compaq Computer Corp (Now owned by = Hewlett-Packard)' > device =3D 'Smart Array 64xx/6i Controller' > class =3D mass storage > subclass =3D RAID > pcib5@pci0:5:0:0: class=3D0x060400 card=3D0x00000000 = chip=3D0x03298086 > rev=3D0x09 hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D 'PCI Express-to-PCI Express Bridge A (6700PXH)' > class =3D bridge > subclass =3D PCI-PCI > pcib7@pci0:5:0:2: class=3D0x060400 card=3D0x00000000 = chip=3D0x032a8086 > rev=3D0x09 hdr=3D0x01 > vendor =3D 'Intel Corporation' > device =3D 'PCI Express-to-PCI Express Bridge B (6700PXH)' > class =3D bridge > subclass =3D PCI-PCI > pcib6@pci0:6:2:0: class=3D0x060400 card=3D0x00000000 = chip=3D0x01a71014 > rev=3D0x02 hdr=3D0x01 > vendor =3D 'International Business Machines Corp.' > device =3D 'PCI-X Bridge R1.1 (IBM 133)' > class =3D bridge > subclass =3D PCI-PCI > vgapci0@pci0:1:3:0: class=3D0x030000 card=3D0x001e0e11 = chip=3D0x47521002 > rev=3D0x27 hdr=3D0x00 > vendor =3D 'ATI Technologies Inc. / Advanced Micro Devices, = Inc.' > device =3D 'ATI On-Board VGA for HP Proliant 350 G3 (Rage XL = PCI)' > class =3D display > subclass =3D VGA > none0@pci0:1:4:0: class=3D0x088000 card=3D0xb2060e11 = chip=3D0xb2030e11 > rev=3D0x01 hdr=3D0x00 > vendor =3D 'Compaq Computer Corp (Now owned by = Hewlett-Packard)' > device =3D 'Integrated Lights Out Processor (iLo)' > class =3D base peripheral > none1@pci0:1:4:2: class=3D0x088000 card=3D0xb2060e11 = chip=3D0xb2040e11 > rev=3D0x01 hdr=3D0x00 > vendor =3D 'Compaq Computer Corp (Now owned by = Hewlett-Packard)' > device =3D 'Integrated Lights Out Processor (iLo)' > class =3D base peripheral >=20 >=20 >> On May 4, 2010, at 12:00 PM, Per olof Ljungmark wrote: >>=20 >>> The following reply was made to PR kern/146287; it has been noted by = GNATS. >>>=20 >>> From: Per olof Ljungmark <peo@intersonic.se> >>> To: bug-followup@FreeBSD.org, peo@intersonic.se >>> Cc: seanbru@yahoo-inc.com >>> Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one = SmartArray >>> controller >>> Date: Tue, 04 May 2010 19:56:19 +0200 >>>=20 >>> Copyright (c) 1992-2009 The FreeBSD Project. >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 >>> The Regents of the University of California. All rights = reserved. >>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>> FreeBSD 8.0-RELEASE-p2 #0: Tue May 4 00:23:37 CEST 2010 >>> peo@lowell.i.inter-sonic.com:/usr/obj/usr/src/sys/GENERIC >>> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e1a000. >>> Timecounter "i8254" frequency 1193182 Hz quality 0 >>> Calibrating TSC clock ... TSC clock: 3400136791 Hz >>> CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.14-MHz K8-class CPU) >>> Origin =3D "GenuineIntel" Id =3D 0xf41 Stepping =3D 1 >>>=20 >>> = Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >>> Features2=3D0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR> >>> AMD Features=3D0x20000800<SYSCALL,LM> >>> TSC: P-state invariant >>> real memory =3D 12884901888 (12288 MB) >>> Physical memory chunk(s): >>> 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) >>> 0x0000000000e51000 - 0x00000000dfff2fff, 3743031296 bytes (913826 = pages) >>> 0x0000000100000000 - 0x00000003049d6fff, 8667361280 bytes (2116055 = pages) >>> avail memory =3D 12349284352 (11777 MB) >>> ACPI APIC Table: <HP 00000083> >>> INTR: Adding local APIC 6 as a target >>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >>> FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads >>> cpu0 (BSP): APIC ID: 0 >>> cpu1 (AP/HT): APIC ID: 1 >>> cpu2 (AP): APIC ID: 6 >>> cpu3 (AP/HT): APIC ID: 7 >>> APIC: CPU 0 has ACPI ID 0 >>> APIC: CPU 1 has ACPI ID 1 >>> APIC: CPU 2 has ACPI ID 6 >>> APIC: CPU 3 has ACPI ID 7 >>> ULE: setup cpu 0 >>> ULE: setup cpu 1 >>> ULE: setup cpu 2 >>> ULE: setup cpu 3 >>> ACPI: RSDP 0xf4f00 00024 (v2 HP ) >>> ACPI: XSDT 0xdfff3300 0004C (v1 HP P51 00000002 =EF=BF=BD\^= D 0000162E) >>> ACPI: FACP 0xdfff3380 000F4 (v3 HP P51 00000002 =EF=BF=BD\^= D 0000162E) >>> ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default = 16 >>> 20090521 tbfadt-707 >>> ACPI: DSDT 0xdfff3480 02DAB (v1 HP DSDT 00000001 INTL = 20030228) >>> ACPI: FACS 0xdfff3100 00040 >>> ACPI: SPCR 0xdfff3140 00050 (v1 HP SPCRRBSU 00000001 =EF=BF=BD\^= D 0000162E) >>> ACPI: MCFG 0xdfff31c0 0003C (v1 HP ProLiant 00000001 = 00000000) >>> ACPI: APIC 0xdfff3200 000C2 (v1 HP 00000083 00000002 = 00000000) >>> ACPI: SSDT 0xdfff8000 004C9 (v1 HP SSDTP 00000001 INTL = 20030228) >>> MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 >>> ioapic0: Routing external 8259A's -> intpin 0 >>> MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000 >>> MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400 >>> MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec84000 >>> MADT: Found IO APIC ID 12, Interrupt 96 at 0xfec84400 >>> MADT: Interrupt override: source 0, irq 2 >>> ioapic0: Routing IRQ 0 -> intpin 2 >>> MADT: Interrupt override: source 9, irq 9 >>> ioapic0: intpin 9 trigger: level >>> lapic: Routing NMI -> LINT1 >>> lapic: LINT1 trigger: edge >>> lapic: LINT1 polarity: high >>> ioapic0 <Version 2.0> irqs 0-23 on motherboard >>> ioapic1 <Version 2.0> irqs 24-47 on motherboard >>> ioapic2 <Version 2.0> irqs 48-71 on motherboard >>> ioapic3 <Version 2.0> irqs 72-95 on motherboard >>> ioapic4 <Version 2.0> irqs 96-119 on motherboard >>> cpu0 BSP: >>> ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff >>> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >>> timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00010400 >>> wlan: <802.11 Link Layer> >>> null: <null device, zero device> >>> random: <entropy source, Software, Yarrow> >>> nfslock: pseudo-device >>> kbd: new array size 4 >>> kbd1 at kbdmux0 >>> mem: <memory> >>> io: <I/O> >>> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 >>> acpi0: <HP P51> on motherboard >>> PCIe: Memory Mapped configuration base @ 0xe0000000 >>> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 >>> acpi0: [MPSAFE] >>> acpi0: [ITHREAD] >>> acpi0: Power Button (fixed) >>> acpi0: wakeup code va 0xffffff8000025000 pa 0x4000 >>> acpi_bus_number: root bus has no _BBN, assuming 0 >>> AcpiOsDerivePciId: \\_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 0 >>> acpi_bus_number: root bus has no _BBN, assuming 0 >>> AcpiOsDerivePciId: \\_SB_.PCI0.PTC0.PCXC.SHP0 -> bus 5 dev 0 func 0 >>> acpi_bus_number: root bus has no _BBN, assuming 0 >>> AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.ICH5 -> bus 0 dev 31 func 0 >>> ACPI timer: 0/397 0/5 0/5 0/5 0/6 0/5 0/5 0/6 0/5 0/4 -> 0 >>> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 >>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 >>> pci_link0: Index IRQ Rtd Ref IRQs >>> Initial Probe 0 5 N 0 5 7 10 11 >>> Validation 0 5 N 0 5 7 10 11 >>> After Disable 0 255 N 0 5 7 10 11 >>> pci_link1: Index IRQ Rtd Ref IRQs >>> Initial Probe 0 7 N 0 5 7 10 11 >>> Validation 0 7 N 0 5 7 10 11 >>> After Disable 0 255 N 0 5 7 10 11 >>> pci_link2: Index IRQ Rtd Ref IRQs >>> Initial Probe 0 7 N 0 5 7 10 11 >>> Validation 0 7 N 0 5 7 10 11 >>> After Disable 0 255 N 0 5 7 10 11 >>> pci_link3: Index IRQ Rtd Ref IRQs >>> Initial Probe 0 5 N 0 5 7 10 11 >>> Validation 0 5 N 0 5 7 10 11 >>> After Disable 0 255 N 0 5 7 10 11 >>> pci_link4: Index IRQ Rtd Ref IRQs >>> Initial Probe 0 255 N 0 5 7 10 11 >>> Validation 0 255 N 0 5 7 10 11 >>> After Disable 0 255 N 0 5 7 10 11 >>> pci_link5: Index IRQ Rtd Ref IRQs >>> Initial Probe 0 5 N 0 5 7 10 11 >>> Validation 0 5 N 0 5 7 10 11 >>> After Disable 0 255 N 0 5 7 10 11 >>> pci_link6: Index IRQ Rtd Ref IRQs >>> Initial Probe 0 5 N 0 5 7 10 11 >>> Validation 0 5 N 0 5 7 10 11 >>> After Disable 0 255 N 0 5 7 10 11 >>> pci_link7: Index IRQ Rtd Ref IRQs >>> Initial Probe 0 5 N 0 5 7 10 11 >>> Validation 0 5 N 0 5 7 10 11 >>> After Disable 0 255 N 0 5 7 10 11 >>> pcib0: <ACPI Host-PCI bridge> on acpi0 >>> pci0: <ACPI PCI bus> on pcib0 >>> pci0: domain=3D0, physical bus=3D0 >>> found-> vendor=3D0x8086, dev=3D0x3590, revid=3D0x0c >>> domain=3D0, bus=3D0, slot=3D0, func=3D0 >>> class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 >>> cmdreg=3D0x0146, statreg=3D0x0090, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) >>> found-> vendor=3D0x8086, dev=3D0x3595, revid=3D0x0c >>> domain=3D0, bus=3D0, slot=3D2, func=3D0 >>> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 >>> cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) >>> intpin=3Da, irq=3D255 >>> powerspec 2 supports D0 D3 current D0 >>> MSI supports 2 messages >>> found-> vendor=3D0x8086, dev=3D0x3599, revid=3D0x0c >>> domain=3D0, bus=3D0, slot=3D6, func=3D0 >>> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 >>> cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) >>> intpin=3Da, irq=3D255 >>> powerspec 2 supports D0 D3 current D0 >>> MSI supports 2 messages >>> found-> vendor=3D0x8086, dev=3D0x24d2, revid=3D0x02 >>> domain=3D0, bus=3D0, slot=3D29, func=3D0 >>> class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 >>> cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) >>> intpin=3Da, irq=3D5 >>> map[20]: type I/O Port, range 32, base 0x3000, size 5, = enabled >>> pcib0: matched entry for 0.29.INTA >>> pcib0: slot 29 INTA hardwired to IRQ 16 >>> found-> vendor=3D0x8086, dev=3D0x24d4, revid=3D0x02 >>> domain=3D0, bus=3D0, slot=3D29, func=3D1 >>> class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 >>> cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) >>> intpin=3Db, irq=3D5 >>> map[20]: type I/O Port, range 32, base 0x3020, size 5, = enabled >>> pcib0: matched entry for 0.29.INTB >>> pcib0: slot 29 INTB hardwired to IRQ 19 >>> found-> vendor=3D0x8086, dev=3D0x24d7, revid=3D0x02 >>> domain=3D0, bus=3D0, slot=3D29, func=3D2 >>> class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 >>> cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) >>> intpin=3Dc, irq=3D7 >>> map[20]: type I/O Port, range 32, base 0x3040, size 5, = enabled >>> pcib0: matched entry for 0.29.INTC >>> pcib0: slot 29 INTC hardwired to IRQ 18 >>> found-> vendor=3D0x8086, dev=3D0x24de, revid=3D0x02 >>> domain=3D0, bus=3D0, slot=3D29, func=3D3 >>> class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 >>> cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) >>> intpin=3Da, irq=3D5 >>> map[20]: type I/O Port, range 32, base 0x3060, size 5, = enabled >>> pcib0: matched entry for 0.29.INTA >>> pcib0: slot 29 INTA hardwired to IRQ 16 >>> found-> vendor=3D0x8086, dev=3D0x24dd, revid=3D0x02 >>> domain=3D0, bus=3D0, slot=3D29, func=3D7 >>> class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 >>> cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) >>> intpin=3Dd, irq=3D5 >>> powerspec 2 supports D0 D3 current D0 >>> map[10]: type Memory, range 32, base 0xfbef0000, size 10, = enabled >>> pcib0: matched entry for 0.29.INTD >>> pcib0: slot 29 INTD hardwired to IRQ 23 >>> found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0xc2 >>> domain=3D0, bus=3D0, slot=3D30, func=3D0 >>> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 >>> cmdreg=3D0x0147, statreg=3D0x0080, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) >>> found-> vendor=3D0x8086, dev=3D0x24d0, revid=3D0x02 >>> domain=3D0, bus=3D0, slot=3D31, func=3D0 >>> class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 >>> cmdreg=3D0x014f, statreg=3D0x0280, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) >>> found-> vendor=3D0x8086, dev=3D0x24db, revid=3D0x02 >>> domain=3D0, bus=3D0, slot=3D31, func=3D1 >>> class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 >>> cmdreg=3D0x0005, statreg=3D0x0288, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) >>> intpin=3Da, irq=3D255 >>> map[20]: type I/O Port, range 32, base 0x500, size 4, enabled >>> map[24]: type Memory, range 32, base 0, size 10, memory = disabled >>> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 >>> pcib1: domain 0 >>> pcib1: secondary bus 2 >>> pcib1: subordinate bus 4 >>> pcib1: I/O decode 0x4000-0x4fff >>> pcib1: memory decode 0xfdd00000-0xfdefffff >>> pcib1: no prefetched decode >>> pci2: <ACPI PCI bus> on pcib1 >>> pci2: domain=3D0, physical bus=3D2 >>> found-> vendor=3D0x8086, dev=3D0x0329, revid=3D0x09 >>> domain=3D0, bus=3D2, slot=3D0, func=3D0 >>> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 >>> cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) >>> powerspec 2 supports D0 D3 current D0 >>> MSI supports 1 message, 64 bit >>> found-> vendor=3D0x8086, dev=3D0x032a, revid=3D0x09 >>> domain=3D0, bus=3D2, slot=3D0, func=3D2 >>> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 >>> cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) >>> powerspec 2 supports D0 D3 current D0 >>> MSI supports 1 message, 64 bit >>> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2 >>> pcib2: domain 0 >>> pcib2: secondary bus 3 >>> pcib2: subordinate bus 3 >>> pcib2: I/O decode 0xf000-0xfff >>> pcib2: memory decode 0xfdd00000-0xfddfffff >>> pcib2: no prefetched decode >>> pci3: <ACPI PCI bus> on pcib2 >>> pci3: domain=3D0, physical bus=3D3 >>> found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x10 >>> domain=3D0, bus=3D3, slot=3D1, func=3D0 >>> class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1 >>> cmdreg=3D0x0156, statreg=3D0x02b0, cachelnsz=3D16 (dwords) >>> lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), = maxlat=3D0x00 (0 ns) >>> intpin=3Da, irq=3D7 >>> powerspec 2 supports D0 D3 current D0 >>> MSI supports 8 messages, 64 bit >>> map[10]: type Memory, range 64, base 0xfddf0000, size 16, = enabled >>> pcib2: requested memory range 0xfddf0000-0xfddfffff: good >>> pcib1: requested memory range 0xfddf0000-0xfddfffff: good >>> pcib2: matched entry for 3.1.INTA >>> pcib2: slot 1 INTA hardwired to IRQ 25 >>> found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x10 >>> domain=3D0, bus=3D3, slot=3D1, func=3D1 >>> class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1 >>> cmdreg=3D0x0156, statreg=3D0x02b0, cachelnsz=3D16 (dwords) >>> lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), = maxlat=3D0x00 (0 ns) >>> intpin=3Db, irq=3D7 >>> powerspec 2 supports D0 D3 current D0 >>> MSI supports 8 messages, 64 bit >>> map[10]: type Memory, range 64, base 0xfdde0000, size 16, = enabled >>> pcib2: requested memory range 0xfdde0000-0xfddeffff: good >>> pcib1: requested memory range 0xfdde0000-0xfddeffff: good >>> pcib2: matched entry for 3.1.INTB >>> pcib2: slot 1 INTB hardwired to IRQ 26 >>> pci0:3:1:0: bad VPD cksum, remain 19 >>> bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem >>> 0xfddf0000-0xfddfffff irq 25 at device 1.0 on pci3 >>> bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfddf0000 >>> bge0: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X >>> miibus0: <MII bus> on bge0 >>> brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0 >>> brgphy0: OUI 0x000818, model 0x0019, rev. 0 >>> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >>> 1000baseT-FDX, auto >>> bge0: bpf attached >>> bge0: Ethernet address: 00:12:79:d1:2e:2d >>> ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 49 >>> bge0: [MPSAFE] >>> bge0: [ITHREAD] >>> pci0:3:1:1: bad VPD cksum, remain 19 >>> bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem >>> 0xfdde0000-0xfddeffff irq 26 at device 1.1 on pci3 >>> bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdde0000 >>> bge1: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X >>> miibus1: <MII bus> on bge1 >>> brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1 >>> brgphy1: OUI 0x000818, model 0x0019, rev. 0 >>> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >>> 1000baseT-FDX, auto >>> bge1: bpf attached >>> bge1: Ethernet address: 00:12:79:d1:2e:2c >>> ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 0 vector 50 >>> bge1: [MPSAFE] >>> bge1: [ITHREAD] >>> pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 >>> pcib3: domain 0 >>> pcib3: secondary bus 4 >>> pcib3: subordinate bus 4 >>> pcib3: I/O decode 0x4000-0x4fff >>> pcib3: memory decode 0xfde00000-0xfdefffff >>> pcib3: no prefetched decode >>> pci4: <ACPI PCI bus> on pcib3 >>> pci4: domain=3D0, physical bus=3D4 >>> found-> vendor=3D0x0e11, dev=3D0x0046, revid=3D0x01 >>> domain=3D0, bus=3D4, slot=3D3, func=3D0 >>> class=3D01-04-00, hdrtype=3D0x00, mfdev=3D0 >>> cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords) >>> lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) >>> intpin=3Da, irq=3D5 >>> powerspec 2 supports D0 D1 D3 current D0 >>> map[10]: type Memory, range 64, base 0xfdef0000, size 13, = enabled >>> pcib3: requested memory range 0xfdef0000-0xfdef1fff: good >>> pcib1: requested memory range 0xfdef0000-0xfdef1fff: good >>> map[18]: type I/O Port, range 32, base 0x4000, size 8, = enabled >>> pcib3: requested I/O range 0x4000-0x40ff: in range >>> pcib1: requested I/O range 0x4000-0x40ff: in range >>> map[1c]: type Memory, range 64, base 0xfde80000, size 18, = enabled >>> pcib3: requested memory range 0xfde80000-0xfdebffff: good >>> pcib1: requested memory range 0xfde80000-0xfdebffff: good >>> pcib3: matched entry for 4.3.INTA >>> pcib3: slot 3 INTA hardwired to IRQ 51 >>> ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem >>> 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on = pci4 >>> ciss0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdef0000 >>> ciss0: PERFORMANT Transport >>> ciss0: got 0 MSI messages] >>> ioapic2: routing intpin 3 (PCI IRQ 51) to lapic 0 vector 51 >>> ciss0: [MPSAFE] >>> ciss0: [ITHREAD] >>> ciss0: using 256 of 1024 available commands >>> ciss0: firmware 2.84 >>> ciss0: 2 SCSI channels >>> ciss0: signature 'CISS' >>> ciss0: valence 1 >>> ciss0: supported I/O methods 0x80000006<simple,performant> >>> ciss0: active I/O method 0x5<performant> >>> ciss0: 4G page base 0x00000000 >>> ciss0: interrupt coalesce delay 0us >>> ciss0: interrupt coalesce count 16 >>> ciss0: max outstanding commands 1024 >>> ciss0: bus types 0x4 >>> ciss0: server name '' >>> ciss0: heartbeat 0x5c >>> ciss0: 6 physical devices >>> ciss0: 1 logical drive >>> ciss0: logical drive (b0t0): RAID 1, 139776MB online >>> pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0 >>> pcib4: domain 0 >>> pcib4: secondary bus 5 >>> pcib4: subordinate bus 12 >>> pcib4: I/O decode 0x5000-0x5fff >>> pcib4: memory decode 0xfdf00000-0xfdffffff >>> pcib4: no prefetched decode >>> pci5: <ACPI PCI bus> on pcib4 >>> pci5: domain=3D0, physical bus=3D5 >>> found-> vendor=3D0x8086, dev=3D0x0329, revid=3D0x09 >>> domain=3D0, bus=3D5, slot=3D0, func=3D0 >>> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 >>> cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) >>> powerspec 2 supports D0 D3 current D0 >>> MSI supports 1 message, 64 bit >>> found-> vendor=3D0x8086, dev=3D0x032a, revid=3D0x09 >>> domain=3D0, bus=3D5, slot=3D0, func=3D2 >>> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 >>> cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) >>> powerspec 2 supports D0 D3 current D0 >>> MSI supports 1 message, 64 bit >>> pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci5 >>> pcib5: domain 0 >>> pcib5: secondary bus 6 >>> pcib5: subordinate bus 9 >>> pcib5: I/O decode 0x5000-0x5fff >>> pcib5: memory decode 0xfdf00000-0xfdffffff >>> pcib5: no prefetched decode >>> pci6: <ACPI PCI bus> on pcib5 >>> pci6: domain=3D0, physical bus=3D6 >>> found-> vendor=3D0x1014, dev=3D0x01a7, revid=3D0x02 >>> domain=3D0, bus=3D6, slot=3D2, func=3D0 >>> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 >>> cmdreg=3D0x0147, statreg=3D0x0230, cachelnsz=3D16 (dwords) >>> lattimer=3D0x40 (1920 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00= (0 ns) >>> powerspec 2 supports D0 D3 current D0 >>> pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci6 >>> pcib6: domain 0 >>> pcib6: secondary bus 7 >>> pcib6: subordinate bus 7 >>> pcib6: I/O decode 0x5000-0x5fff >>> pcib6: memory decode 0xfdf00000-0xfdffffff >>> pcib6: no prefetched decode >>> device_attach: pcib6 attach returned 6 >>> pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5 >>> pcib7: domain 0 >>> pcib7: secondary bus 10 >>> pcib7: subordinate bus 12 >>> pcib7: I/O decode 0xf000-0xfff >>> pcib7: no prefetched decode >>> pci10: <ACPI PCI bus> on pcib7 >>> pci10: domain=3D0, physical bus=3D10 >>> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port = 0x3000-0x301f >>> irq 16 at device 29.0 on pci0 >>> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000 >>> ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 >>> uhci0: [MPSAFE] >>> uhci0: [ITHREAD] >>> uhci0: LegSup =3D 0x003b >>> usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 >>> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port = 0x3020-0x303f >>> irq 19 at device 29.1 on pci0 >>> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020 >>> ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53 >>> uhci1: [MPSAFE] >>> uhci1: [ITHREAD] >>> uhci1: LegSup =3D 0x0010 >>> usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 >>> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port = 0x3040-0x305f >>> irq 18 at device 29.2 on pci0 >>> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040 >>> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 >>> uhci2: [MPSAFE] >>> uhci2: [ITHREAD] >>> uhci2: LegSup =3D 0x0010 >>> usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 >>> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port = 0x3060-0x307f >>> irq 16 at device 29.3 on pci0 >>> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060 >>> uhci3: [MPSAFE] >>> uhci3: [ITHREAD] >>> uhci3: LegSup =3D 0x0010 >>> usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 >>> ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem >>> 0xfbef0000-0xfbef03ff irq 23 at device 29.7 on pci0 >>> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbef0000 >>> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55 >>> ehci0: [MPSAFE] >>> ehci0: [ITHREAD] >>> usbus4: EHCI version 1.0 >>> usbus4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 >>> pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >>> pcib8: domain 0 >>> pcib8: secondary bus 1 >>> pcib8: subordinate bus 1 >>> pcib8: I/O decode 0x1000-0x2fff >>> pcib8: memory decode 0xfbf00000-0xfcffffff >>> pcib8: no prefetched decode >>> pcib8: Subtractively decoded bridge. >>> pci1: <ACPI PCI bus> on pcib8 >>> pci1: domain=3D0, physical bus=3D1 >>> found-> vendor=3D0x1002, dev=3D0x4752, revid=3D0x27 >>> domain=3D0, bus=3D1, slot=3D3, func=3D0 >>> class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 >>> cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D16 (dwords) >>> lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), = maxlat=3D0x00 (0 ns) >>> powerspec 2 supports D0 D1 D2 D3 current D0 >>> map[10]: type Memory, range 32, base 0xfc000000, size 24, = enabled >>> pcib8: requested memory range 0xfc000000-0xfcffffff: good >>> map[14]: type I/O Port, range 32, base 0x2000, size 8, = enabled >>> pcib8: requested I/O range 0x2000-0x20ff: in range >>> map[18]: type Memory, range 32, base 0xfbff0000, size 12, = enabled >>> pcib8: requested memory range 0xfbff0000-0xfbff0fff: good >>> found-> vendor=3D0x0e11, dev=3D0xb203, revid=3D0x01 >>> domain=3D0, bus=3D1, slot=3D4, func=3D0 >>> class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 >>> cmdreg=3D0x0103, statreg=3D0x0290, cachelnsz=3D0 (dwords) >>> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) >>> intpin=3Da, irq=3D5 >>> powerspec 2 supports D0 D3 current D0 >>> map[10]: type I/O Port, range 32, base 0x1800, size 8, = enabled >>> pcib8: requested I/O range 0x1800-0x18ff: in range >>> map[14]: type Memory, range 32, base 0xfbfe0000, size 9, = enabled >>> pcib8: requested memory range 0xfbfe0000-0xfbfe01ff: good >>> pcib8: matched entry for 1.4.INTA >>> pcib8: slot 4 INTA hardwired to IRQ 21 >>> found-> vendor=3D0x0e11, dev=3D0xb204, revid=3D0x01 >>> domain=3D0, bus=3D1, slot=3D4, func=3D2 >>> class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 >>> cmdreg=3D0x0197, statreg=3D0x0290, cachelnsz=3D16 (dwords) >>> lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) >>> intpin=3Db, irq=3D5 >>> powerspec 2 supports D0 D3 current D0 >>> map[10]: type I/O Port, range 32, base 0x2400, size 8, = enabled >>> pcib8: requested I/O range 0x2400-0x24ff: in range >>> map[14]: type Memory, range 32, base 0xfbfd0000, size 11, = enabled >>> pcib8: requested memory range 0xfbfd0000-0xfbfd07ff: good >>> map[18]: type Memory, range 32, base 0xfbfc0000, size 13, = enabled >>> pcib8: requested memory range 0xfbfc0000-0xfbfc1fff: good >>> map[1c]: type Memory, range 32, base 0xfbf00000, size 19, = enabled >>> pcib8: requested memory range 0xfbf00000-0xfbf7ffff: good >>> pcib8: matched entry for 1.4.INTB >>> pcib8: slot 4 INTB hardwired to IRQ 22 >>> vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem >>> 0xfc000000-0xfcffffff,0xfbff0000-0xfbff0fff at device 3.0 on pci1 >>> pci1: <base peripheral> at device 4.0 (no driver attached) >>> pci1: <base peripheral> at device 4.2 (no driver attached) >>> isab0: <PCI-ISA bridge> at device 31.0 on pci0 >>> isa0: <ISA bus> on isab0 >>> atapci0: <Intel ICH5 UDMA100 controller> port >>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on = pci0 >>> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x500 >>> ata0: <ATA channel 0> on atapci0 >>> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 >>> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 >>> ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 >>> ata0: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb >>> ata0: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 >>> ata0: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x10000 >>> ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 >>> ata0: [MPSAFE] >>> ata0: [ITHREAD] >>> ata1: <ATA channel 1> on atapci0 >>> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 >>> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 >>> ata1: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00 >>> ata1: stat0=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01 >>> ata1: stat1=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01 >>> ata1: reset tp2 stat0=3D01 stat1=3D01 devices=3D0x0 >>> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57 >>> ata1: [MPSAFE] >>> ata1: [ITHREAD] >>> acpi_tz0: <Thermal Zone> on acpi0 >>> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >>> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >>> atkbd: the current kbd controller command byte 0065 >>> atkbd: keyboard ID 0x41ab (2) >>> kbd0 at atkbd0 >>> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 >>> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 >>> atkbd0: [GIANT-LOCKED] >>> atkbd0: [ITHREAD] >>> psm0: unable to allocate IRQ >>> psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 >>> psm0: current command byte:0065 >>> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >>> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59 >>> psm0: [GIANT-LOCKED] >>> psm0: [ITHREAD] >>> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons >>> psm0: config:00000000, flags:00000008, packet size:3 >>> psm0: syncmask:c0, syncbits:00 >>> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on = acpi0 >>> ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60 >>> uart0: [FILTER] >>> uart0: fast interrupt >>> fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 = on acpi0 >>> fdc0: ic_type 90 part_id 73 >>> ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 61 >>> fdc0: [FILTER] >>> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >>> cpu0: <ACPI CPU> on acpi0 >>> ACPI: SSDT 0xdfff9000 002DA (v1 HP SSDT0 00000001 INTL = 20030228) >>> cpu0: switching to generic Cx mode >>> acpi_perf0: <ACPI CPU Frequency Control> on cpu0 >>> p4tcc0: <CPU Frequency Thermal Control> on cpu0 >>> cpu1: <ACPI CPU> on acpi0 >>> ACPI: SSDT 0xdfff9300 002DA (v1 HP SSDT1 00000001 INTL = 20030228) >>> est1: <Enhanced SpeedStep Frequency Control> on cpu1 >>> est: CPU supports Enhanced Speedstep, but is not recognized. >>> est: cpu_vendor GenuineIntel, msr 112d0000112d >>> device_attach: est1 attach returned 6 >>> p4tcc1: <CPU Frequency Thermal Control> on cpu1 >>> cpu2: <ACPI CPU> on acpi0 >>> ACPI: SSDT 0xdfff9600 002DA (v1 HP SSDT2 00000001 INTL = 20030228) >>> est2: <Enhanced SpeedStep Frequency Control> on cpu2 >>> est: CPU supports Enhanced Speedstep, but is not recognized. >>> est: cpu_vendor GenuineIntel, msr 112d0000112d >>> device_attach: est2 attach returned 6 >>> p4tcc2: <CPU Frequency Thermal Control> on cpu2 >>> cpu3: <ACPI CPU> on acpi0 >>> ACPI: SSDT 0xdfff9900 002DF (v1 HP SSDT3 00000001 INTL = 20030228) >>> est3: <Enhanced SpeedStep Frequency Control> on cpu3 >>> est: CPU supports Enhanced Speedstep, but is not recognized. >>> est: cpu_vendor GenuineIntel, msr 112d0000112d >>> device_attach: est3 attach returned 6 >>> p4tcc3: <CPU Frequency Thermal Control> on cpu3 >>> ahc_isa_probe 0: ioport 0xc00 alloc failed >>> ex_isa_identify() >>> isa_probe_children: disabling PnP devices >>> atkbdc: atkbdc0 already exists; skipping it >>> fdc: fdc0 already exists; skipping it >>> sc: sc0 already exists; skipping it >>> uart: uart0 already exists; skipping it >>> isa_probe_children: probing non-PnP devices >>> orm0: <ISA Option ROMs> at iomem >>> 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0 >>> sc0: <System console> at flags 0x100 on isa0 >>> sc0: VGA <16 virtual consoles, flags=3D0x300> >>> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) >>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 >>> atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 >>> atrtc0: registered as a time-of-day clock (resolution 1000000us) >>> ppc0: cannot reserve I/O port range >>> ppc0: <Parallel port> failed to probe at irq 7 on isa0 >>> uart1: <Non-standard ns8250 class UART with FIFOs> at port = 0x2f8-0x2ff >>> irq 3 on isa0 >>> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 62 >>> uart1: [FILTER] >>> uart1: fast interrupt >>> isa_probe_children: probing PnP devices >>> Device configuration finished. >>> Reducing kern.maxvnodes 763673 -> 100000 >>> procfs registered >>> lapic: Divisor 2, Frequency 100004020 hz >>> Timecounter "TSC" frequency 3400136791 Hz quality -100 >>> Timecounters tick every 1.000 msec >>> lo0: bpf attached >>> hptrr: no controller detected. >>> ata0: Identifying devices: 00010000 >>> ata0: New devices: 00010000 >>> fdc0: output ready timeout >>> fdc0: output ready timeout >>> fdc0: output ready timeout >>> fdc0: output ready timeout >>> fdc0: output ready timeout >>> fdc0: output ready timeout >>> fdc0: output ready timeout >>> usbus0: 12Mbps Full Speed USB v1.0 >>> usbus1: 12Mbps Full Speed USB v1.0 >>> usbus2: 12Mbps Full Speed USB v1.0 >>> usbus3: 12Mbps Full Speed USB v1.0 >>> usbus4: 480Mbps High Speed USB v2.0 >>> ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire >>> acd0: setting PIO4 on ICH5 chip >>> acd0: setting UDMA33 on ICH5 chip >>> ugen0.1: <Intel> at usbus0 >>> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on = usbus0 >>> ugen1.1: <Intel> at usbus1 >>> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on = usbus1 >>> ugen2.1: <Intel> at usbus2 >>> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on = usbus2 >>> ugen3.1: <Intel> at usbus3 >>> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on = usbus3 >>> ugen4.1: <Intel> at usbus4 >>> uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on = usbus4 >>> acd0: <HL-DT-STCD-RW/DVD DRIVE GCC-C10N/2.00> CDRW drive at ata0 as = master >>> acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB = buffer, >>> UDMA33 >>> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet >>> acd0: Writes: CDR, CDRW, test write, burnproof >>> acd0: Audio: play, 256 volume levels >>> acd0: Mechanism: ejectable tray, unlocked >>> acd0: Medium: no/blank disc >>> ata1: Identifying devices: 00000000 >>> ata1: New devices: 00000000 >>> uhub0: 2 ports with 2 removable, self powered >>> uhub1: 2 ports with 2 removable, self powered >>> uhub2: 2 ports with 2 removable, self powered >>> uhub3: 2 ports with 2 removable, self powered >>> fdc0: output ready timeout >>> fdc0: input ready timeout >>> fdc0: input ready timeout >>> fdc0: output ready timeout >>> fdc0: input ready timeout >>> fdc0: input ready timeout >>> fdc0: output ready timeout >>> fdc0: input ready timeout >>> fdc0: input ready timeout >>> fdc0: output ready timeout >>> fdc0: input ready timeout >>> fdc0: input ready timeout >>> da0 at ciss0 bus 0 target 0 lun 0 >>> da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device >>> da0: 135.168MB/s transfers >>> da0: Command Queueing enabled >>> da0: 140002MB (286726080 512 byte sectors: 255H 32S/T 35138C) >>> pass0 at ciss0 bus 0 target 0 lun 0 >>> pass0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device >>> pass0: 135.168MB/s transfers >>> pass0: Command Queueing enabled >>> pass1 at ciss0 bus 33 target 0 lun 0 >>> pass1: <SEAGATE ST373207LC 0005> Fixed Uninstalled SCSI-3 device >>> pass1: Serial Number 3KT5ABMQ000077052PVP >>> pass1: 135.168MB/s transfers >>> pass1: Command Queueing enabled >>> pass2 at ciss0 bus 33 target 1 lun 0 >>> pass2: <SEAGATE ST373207LC 0005> Fixed Uninstalled SCSI-3 device >>> pass2: Serial Number 3KT65G0300009740UG3C >>> pass2: 135.168MB/s transfers >>> pass2: Command Queueing enabled >>> pass3 at ciss0 bus 33 target 2 lun 0 >>> pass3: <SEAGATE ST373207LC 0005> Fixed Uninstalled SCSI-3 device >>> pass3: Serial Number 3KT65G7800009740W27L >>> pass3: 135.168MB/s transfers >>> pass3: Command Queueing enabled >>> pass4 at ciss0 bus 33 target 3 lun 0 >>> pass4: <SEAGATE ST373207LC 0003> Fixed Uninstalled SCSI-3 device >>> pass4: Serial Number 3KT2W9ZB00007616NLEN >>> pass4: 135.168MB/s transfers >>> pass4: Command Queueing enabled >>> pass5 at ciss0 bus 33 target 4 lun 0 >>> pass5: <SEAGATE ST373207LC 0003> Fixed Uninstalled SCSI-3 device >>> pass5: Serial Number 3KT18LBP0000754281N7 >>> pass5: 135.168MB/s transfers >>> pass5: Command Queueing enabled >>> pass6 at ciss0 bus 33 target 7 lun 0 >>> pass6: <COMPAQ PROLIANT 6L6I 0.10> Fixed Processor SCSI-2 device >>> pass6: 135.168MB/s transfers >>> ATA PseudoRAID loaded >>> SMP: AP CPU #1 Launched! >>> cpu1 AP: >>> ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff >>> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >>> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 >>> SMP: AP CPU #2 Launched! >>> cpu2 AP: >>> ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff >>> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >>> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 >>> SMP: AP CPU #3 Launched! >>> cpu3 AP: >>> ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff >>> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >>> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 >>> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 6 vector 48 >>> ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 6 vector 49 >>> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 50 >>> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 51 >>> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 52 >>> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 6 vector 53 >>> ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 6 vector 54 >>> uhub4: 8 ports with 8 removable, self powered >>> ugen2.2: <vendor 0x04d9> at usbus2 >>> ukbd0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr = 2> >>> on usbus2 >>> kbd2 at ukbd0 >>> kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 >>> ums0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr = 2> >>> on usbus2 >>> ums0: 5 buttons and [XYZ] coordinates ID=3D1 >>> GEOM: new disk da0 >>> Trying to mount root from ufs:/dev/da0s1a >>> ct_to_ts([2010-05-04 17:49:30]) =3D 1272995370.000000000 >>> start_init: trying /sbin/init >>> bge0: >>> bge0: link state changed to UP >>> link UP >>>=20 >>> _______________________________________________ >>> freebsd-scsi@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi >>> To unsubscribe, send any mail to = "freebsd-scsi-unsubscribe@freebsd.org" >>=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DA23138F-583D-40D0-8004-7C4273F73D2A>