Date: Fri, 14 Feb 1997 04:56:05 -0800 (PST) From: "William T. Wong" <wwong@stimpy.csusb.edu> To: questions@freebsd.org Subject: 2.2-GAMMA doesn't see cy0 Message-ID: <199702141256.EAA03845@stimpy.csusb.edu>
next in thread | raw e-mail | index | archive | help
Greetings!
I seem to have a slight problem with the cyclades YeP controller card not
being recognized. Is there something I'm leaving out?
While I'm at it, is there a way to set up this terminal server so that when
someone logs into this server, that he/she will will redirected to another
host and be asked for a login and password on that host instead?
BTW, the motherboard is: ASUS T2P4 Rev. 3.10
Here is the output of my "dmesg":
Copyright (c) 1992-1996 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2-970205-GAMMA #0: Thu Feb 13 23:49:25 PST 1997
root@stimpy.csusb.edu:/usr/src/sys/compile/STIMPY
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 200466560 Hz, i8254 clock: 1193255 Hz
CPU: Pentium (200.45-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 62754816 (61284K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 3 on pci0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
cy0 <Cyclades Cyclom-Y Serial Adapter> rev 1 int a irq 10 on pci0:11
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:12
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
(ahc0:0:0): "SEAGATE ST32550N 0021" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2047MB (4194058 512 byte sectors)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:50:9a:8f, type SMC8216/SMC8216C (16 bit)
cy0 not found
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
Here is my kernel config file:
machine "i386"
#cpu "I386_CPU"
#cpu "I486_CPU"
cpu "I586_CPU"
#cpu "I686_CPU"
ident STIMPY
maxusers 64
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
#options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
#options USERCONFIG #boot -c editor
#options VISUAL_USERCONFIG #visual boot -c editor
config kernel root on sd0
controller isa0
#controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1
#tape ft0 at fdc0 drive 2
#controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
#disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#options ATAPI #Enable ATAPI support for IDE bus
#options ATAPI_STATIC #Don't do it as an LKM
#device wcd0 #IDE CD-ROM
# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.
#controller ncr0
#controller amd0
#controller ahb0
controller ahc0
#controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device sd0
#device od0 #See LINT for possible `od' options.
device st0
device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
device cy0 at isa? tty irq 10 iomem 0xd4000 iosiz 0x2000 vector cyintr
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5
#options XSERVER # include code for XFree86
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
#
# Laptop support (see LINT for more options)
#
#device apm0 at isa? disable # Advanced Power Management
#options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS
# PCCARD (PCMCIA) support
#controller crd0
#device pcic0 at crd?
#device pcic1 at crd?
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
#device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr
#device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
#device lpt1 at isa? port? tty
#device mse0 at isa? port 0x23c tty irq 5 vector mseintr
#device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device fxp0
#device vx0
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device fe0 at isa? port 0x300 net irq ? vector feintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
#options KTRACE #kernel tracing
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199702141256.EAA03845>