Date: Mon, 6 Oct 2003 12:10:22 +0200 (CEST) From: Harti Brandt <brandt@fokus.fraunhofer.de> To: Franky <franky@is.net.pl> Cc: freebsd-atm <freebsd-atm@freebsd.org> Subject: Re: Re: patm, idt, ipfw - next adentures Message-ID: <20031006121004.X41960@beagle.fokus.fraunhofer.de> In-Reply-To: <20031002222904.B6457230CA@arrakis.solutions.net.pl> References: <20031002222904.B6457230CA@arrakis.solutions.net.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 3 Oct 2003, Franky wrote: Does that mean it works without ipfw? harti F>> I do not understand why your HW is always requesting for more buffers !! F>Have F>> you done something special ? F>> Can you provide more information about your configuration ? F>> Could you try the same test without ipfw ? F>This is without ipfw (I removed ipfw from kernel). F>Configuration: F>-dmesg F>Copyright (c) 1992-2003 The FreeBSD Project. F>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 F>The Regents of the University of California. All rights reserved. F>FreeBSD 4.9-RC #0: Thu Oct 2 04:16:30 GMT 2003 F>root@ordos.is.net.pl:/usr/src/sys/compile/kernel F>Timecounter "i8254" frequency 1193182 Hz F>Timecounter "TSC" frequency 701594438 Hz F>CPU: Intel Celeron (701.59-MHz 686-class CPU) F>Origin = "GenuineIntel" Id = 0x686 Stepping = 6 F>Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> F>real memory = 267300864 (261036K bytes) F>avail memory = 254853120 (248880K bytes) F>Preloaded elf kernel "kernel" at 0xc02b4000. F>Pentium Pro MTRR support enabled F>Using $PIR table, 10 entries at 0xc00f1360 F>npx0: <math processor> on motherboard F>npx0: INT 16 interface F>pcib0: <Host to PCI bridge> on motherboard F>pci0: <PCI bus> on pcib0 F>agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem F>0xfa000000-0xfa07ffff,0xfc000000-0xfdffffff irq F>pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 F>pci1: <PCI bus> on pcib1 F>fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem F>0xf9000000-0xf90fffff,0xf9800000-0xf9800 F>fxp0: Ethernet address 00:03:47:b0:68:17 F>inphy0: <i82555 10/100 media interface> on miibus0 F>inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto F>proatm0: <PROSUM PROATM adapter> port 0xd400-0xd4ff mem F>0xfb000000-0xfb3fffff,0xf8800000-0xf8800fff F>proatm0: ATM card is PROATM-155 or IDT, PHY=PM5346 or IDT77155 F>proatm0: 128K words of RAM up to 4096 PVC F>proatm0: MAC address 00:c0:fd:00:7b:a0, HWrev=6 F>pci1: <unknown card> (vendor=0x14d2, dev=0xa003) at 12.0 irq 7 F>pci1: <unknown card> (vendor=0x14d2, dev=0xa004) at 12.1 irq 7 F>fxp1: <Intel 82559 Pro/100 Ethernet> port 0xa800-0xa83f mem F>0xf5800000-0xf58fffff,0xf6000000-0xf6000 F>fxp1: Ethernet address 00:03:47:ac:76:1d F>inphy1: <i82555 10/100 media interface> on miibus1 F>inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto F>isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0 F>isa0: <ISA bus> on isab0 F>atapci0: <Intel ICH2 ATA100 controller> port 0x9800-0x980f at device 31.1 on F>pci0 F>ata0: at 0x1f0 irq 14 on atapci0 F>ata1: at 0x170 irq 15 on atapci0 F>pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10 F>orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 F>pmtimer0 on isa0 F>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 F>atkbd0: <AT Keyboard> irq 1 on atkbdc0 F>kbd0 at atkbd0 F>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 F>sio0: type 16550A F>sio1 at port 0x2f8-0x2ff irq 3 on isa0 F>sio1: type 16550A F>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 F>sc0: <System console> at flags 0x100 on isa0 F>sc0: VGA <16 virtual consoles, flags=0x300> F>ad0: 14664MB <IBM-DJNA-351520> [29795/16/63] at ata0-master UDMA66 F>Mounting root from ufs:/dev/ad0s1a F>proatm0: txopen UBR connection for 0/140 F>proatm0: proatm_openvcc: 0/140, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/141 F>proatm0: proatm_openvcc: 0/141, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/142 F>proatm0: proatm_openvcc: 0/142, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/143 F>proatm0: proatm_openvcc: 0/143, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/144 F>proatm0: proatm_openvcc: 0/144, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/145 F>proatm0: proatm_openvcc: 0/145, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/146 F>proatm0: proatm_openvcc: 0/146, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/147 F>proatm0: proatm_openvcc: 0/147, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/148 F>proatm0: proatm_openvcc: 0/148, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/149 F>proatm0: proatm_openvcc: 0/149, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/150 F>proatm0: proatm_openvcc: 0/150, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/151 F>proatm0: proatm_openvcc: 0/151, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/152 F>proatm0: proatm_openvcc: 0/152, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/153 F>proatm0: proatm_openvcc: 0/153, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/154 F>proatm0: proatm_openvcc: 0/154, PCR=15000, SCR=15000 F>proatm0: txopen UBR connection for 0/155 F>proatm0: proatm_openvcc: 0/155, PCR=15000, SCR=15000 F>proatm0 BUFFER STATUS: small=276/510, large=309/510. F>proatm0 BUFFER STATUS: small=316/510, large=310/510. F>proatm0 BUFFER STATUS: small=266/510, large=295/510. F>proatm0 BUFFER STATUS: small=298/510, large=300/510. F>proatm0 BUFFER STATUS: small=277/510, large=304/510. F>proatm0 BUFFER STATUS: small=256/510, large=283/510. F>proatm0 BUFFER STATUS: small=276/510, large=272/510. F>proatm0 BUFFER STATUS: small=295/510, large=305/510. F>proatm0 BUFFER STATUS: small=305/510, large=274/510. F>proatm0 BUFFER STATUS: small=273/510, large=263/510. F>proatm0 BUFFER STATUS: small=283/510, large=288/510. F>proatm0 BUFFER STATUS: small=294/510, large=275/510. F>proatm0 BUFFER STATUS: small=276/510, large=301/510. F>proatm0 BUFFER STATUS: small=268/510, large=315/510. F>proatm0 BUFFER STATUS: small=313/510, large=281/510. F>proatm0 BUFFER STATUS: small=280/510, large=308/510. F>proatm0 BUFFER STATUS: small=287/510, large=264/510. F>proatm0 BUFFER STATUS: small=299/510, large=304/510. F>proatm0 BUFFER STATUS: small=314/510, large=301/510. F>proatm0 BUFFER STATUS: small=271/510, large=293/510. F>-kernel config F>machine i386 F>cpu I686_CPU F>ident kernel F>maxusers 0 F> F>options INET #InterNETworking F>options FFS #Berkeley Fast Filesystem F>options SOFTUPDATES F>options UFS_DIRHASH #Improve performance on big F>directories F>options PROCFS #Process filesystem F>options COMPAT_43 #Compatible with BSD 4.3 [KEEP F>THIS!] F>options SYSVSHM #SYSV-style shared memory F>options SYSVMSG #SYSV-style message queues F>options SYSVSEM #SYSV-style semaphores F>options P1003_1B #Posix P1003_1B real-time extensions F>options _KPOSIX_PRIORITY_SCHEDULING F>options ICMP_BANDLIM #Rate limit bad replies F>options KBD_INSTALL_CDEV # install a CDEV entry in /dev F> F>device proatm0 F>options ATM_CORE F>options ATM_IP F>options ATM_SIGPVC F>#options LIBMCHAIN F> F>#options HZ=1000 F>#options DEVICE_POLLING F>options PANIC_REBOOT_WAIT_TIME=9 F>#options IPFW2 F>#options IPFIREWALL F>#options IPDIVERT F>#options IPFIREWALL_FORWARD F>#options IPFIREWALL_DEFAULT_TO_ACCEPT F>#options DUMMYNET F>#options IPSTEALTH F>#options PPP_BSDCOMP F>#options PPP_DEFLATE F>#options PUC_FASTINTR F> F>options NMBCLUSTERS=65536 F>options NBUF=8192 F> F>device isa F>device pci F>device ata0 at isa? port IO_WD1 irq 14 F>device ata1 at isa? port IO_WD2 irq 15 F>device ata F>device atadisk # ATA disk drives F>options ATA_STATIC_ID #Static device numbering F>device atkbdc0 at isa? port IO_KBD F>device atkbd0 at atkbdc? irq 1 flags 0x0 F>device psm0 at atkbdc? irq 12 F> F>device sio0 at isa? port IO_COM1 flags 0x10 irq 4 F>device sio1 at isa? port IO_COM2 irq 3 F>#device puc F> F>device vga0 at isa? F>device sc0 at isa? flags 0x100 F>device agp # support several AGP chipsets F>device npx0 at nexus? port IO_NPX irq 13 F> F>#device de # DEC/Intel DC21x4x (``Tulip'') F>device fxp F>device miibus # MII bus support F>#device rl # RealTek 8129/8139 F>device sis # Silicon Integrated Systems SiS 900/SiS F>7016 F> F>pseudo-device loop # Network loopback F>pseudo-device ether # Ethernet support F>pseudo-device pty # Pseudo-ttys (telnet etc) F>pseudo-device bpf #Berkeley packet filter F>#pseudo-device tun F>#pseudo-device ppp F>-hardware F>cpu: intel Celeron 700Mhz F>mainboard: ASUS CULS2 (i815e) F>memory: SDRAM 256Mb F>network interfaces: 2 x Intel 82559 Pro/100 F>atm interaface: 1 x PROSUM PROATM-155 F>hdd: IBM-DJNA-351520 15Gb ATA F> F> F> F> F> F>________________________________________________ F>http://www.is.net.pl F> F>_______________________________________________ F>freebsd-atm@freebsd.org mailing list F>http://lists.freebsd.org/mailman/listinfo/freebsd-atm F>To unsubscribe, send any mail to "freebsd-atm-unsubscribe@freebsd.org" F> -- harti brandt, http://www.fokus.fraunhofer.de/research/cc/cats/employees/hartmut.brandt/private brandt@fokus.fraunhofer.de, harti@freebsd.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031006121004.X41960>