Date: Wed, 23 Jul 2003 08:10:14 -0500 From: "Brian Henning" <bhenning@hotmail.com> To: "freebsd" <freebsd-questions@FreeBSD.ORG> Subject: ppp connection problem Message-ID: <Law12-OE55Cs8SlIZao00001468@hotmail.com>
next in thread | raw e-mail | index | archive | help
Greetings all:
I am connecting to my isp with the following ppp.conf using the command
>ppp -auto isp
when i run the command i usually connect on the second try.
for some reason the connection drops after the first try, but my
true problem is i can ping internal ips and not ips outside the network.
I think my problem is with my default route is not setup properly.
here is a snip of my ifconfig, for some reason i have two tun devices.
i think that is caused by trying to dial up twice? any thought on
how to setup my default route properly?
Thanks,
brian
ifconfig
--------
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet 199.17.4.229 --> 199.17.4.4 netmask 0xffffff00
Opened by PID 111
tun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.1 --> 10.0.0.2 netmask 0xffffff00
Opened by PID 121
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 199.17.4.4 UGSc 4 2620 tun0
10.0.0.2 10.0.0.1 UH 0 0 tun1
127.0.0.1 127.0.0.1 UH 0 0 lo0
199.17.4.4 199.17.4.229 UH 4 0 tun0
/etc/ppp/ppp.conf
-----------------
default:
set device /dev/cuaa1
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDP\\T TIMEOUT 40 CONNECT"
set timeout 180
enable dns
isp:
set phone xxx
set authname xxx
set authkey xxx
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Law12-OE55Cs8SlIZao00001468>