From owner-freebsd-questions Tue Feb 10 20:09:17 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id UAA06071 for questions-outgoing; Tue, 10 Feb 1998 20:09:17 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from roguetrader.com (cold.org [206.81.134.103]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id UAA05943 for ; Tue, 10 Feb 1998 20:08:50 -0800 (PST) (envelope-from brandon@roguetrader.com) Received: from localhost (brandon@localhost) by roguetrader.com (8.8.5/8.8.5) with SMTP id VAA29332 for ; Tue, 10 Feb 1998 21:08:48 -0700 (MST) Date: Tue, 10 Feb 1998 21:08:47 -0700 (MST) From: Brandon Gillespie To: freebsd-questions@FreeBSD.ORG Subject: ppp does not linkup unless dialed manually Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is quite a frustration to me, as it worked, and now it doesn't; and unfortunately I cannot track down what I did to change it so it no longer works. I did upgrade from 2.2.1 to 2.2.5 somewhere in the process--but I thougth I had used my scripted dialin rules after that point. Regardless, if I try to use my automatically scripted rules it does not work--but if I manually do what the scripting is doing, it does. This is quite a frustration. When I dial with the rules it does: ppp on pinky> dial sun Dial attempt 1 of 1 Phone: ...... dial OK! login OK! ppp on pinky> Packet mode. ppp on pinky> And that is it. The modem stays connected, but it never finishes the linkup to capitalize the 'PPP' and have everything working. If I manually do it, after it prints 'Packet mode' it sits there for a second and then comes back with the ppp capitalized (as it does when everything is linked up). My configuration is quite simple: ----- ppp.conf default: set device /dev/cuaa0 set speed 115200 set log Phase Chat Connect Carrier hdlc LCP IPCP CCP tun deny lqr set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT" sun: set phone xxxxxxx set timeout 900 set login "TIMEOUT 10 gin:-BREAK-gin: xxxx word: xxxx INIT ppp_crypt" set ifaddr xxx.xx.xxx.60 xxx.xx.xxx.2 255.255.255.0 ----- ppp.linkup: xxx.xx.xxx.60: delete ALL add 0 0 HISADDR MYADDR: delete ALL add 0 0 HISADDR ----- Now, I have a dedicated IP address (that being .60), and .2 is the box which is the dialin server. *THIS USED TO WORK* For nigh a year I've been using this setup without problem. Only recently I upgraded and was diddling around trying to get the masquerading working for the local network and now it does not work anymore. And remember--it does work if I do it by hand. Help? -Brandon Gillespie To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe questions" in the body of the message