From owner-freebsd-current Mon Aug 26 12:15:14 1996 Return-Path: owner-current Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id MAA07127 for current-outgoing; Mon, 26 Aug 1996 12:15:14 -0700 (PDT) Received: from gordius.gordian.com (gordius.gordian.com [192.73.220.81]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id MAA07121 for ; Mon, 26 Aug 1996 12:15:12 -0700 (PDT) Received: from delphi.gordian.com (delphi.gordian.com [192.73.220.125]) by gordius.gordian.com (8.7.5/8.6.5) with ESMTP id MAA27146 for ; Mon, 26 Aug 1996 12:15:13 -0700 (PDT) Received: (from steve@localhost) by delphi.gordian.com (8.7.2/8.6.9) id MAA10702; Mon, 26 Aug 1996 12:15:09 -0700 (PDT) Date: Mon, 26 Aug 1996 12:15:09 -0700 (PDT) Message-Id: <199608261915.MAA10702@delphi.gordian.com> From: Steve Khoo To: freebsd-current@freebsd.org Subject: problems booting with 2 drives on NCR8251D Sender: owner-current@freebsd.org X-Loop: FreeBSD.org Precedence: bulk setup: Asus MB(P55TP4XEG) 512K Cache 32MB RAM Fast Wide Differential SCSI Controller (NCR8251D) Seagate ST12550WD on SCSI ID #0 Seagate ST15150WD on SCSI ID #1 The system is running FreeBSD 2.2-CURRENT sup'd on 8/17/96. The system boots and runs find with just the first(Seagate ST12550WD) drive. When I added the second(Seagate ST15150WD) drive I get the following errors. I can boot dos and do fdisk/format and stuff on the second drive without any problems. Any ideas what the errors mean? I'd appreciate any help. Thanks! SEK FreeBSD 2.2-CURRENT #0: Mon Aug 19 12:48:53 PDT 1996 steve@metis.gordian.com:/usr/src/sys/compile/metis Calibrating clock(s) relative to mc146818A clock... i586 clock: 99465569 Hz, i8254 clock: 1193086 Hz CPU: Pentium (99.47-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf real memory = 33554432 (32768K bytes) avail memory = 30695424 (29976K bytes) Probing for devices on PCI bus 0: chip0 rev 2 on pci0:0 chip1 rev 2 on pci0:7:0 pci0:7:1: Intel Corporation, device=0x1230, class=storage (ide) [no driver assigned] de0 rev 18 int a irq 12 on pci0:9 de0: SMC 9332 DC21140 [10-100Mb/s] pass 1.2 de0: address 00:00:c0:58:c3:e4 de0: enabling 10baseT port ncr0 rev 2 int a irq 10 on pci0:10 ncr0 waiting for scsi devices to settle (ncr0:0:0): "SEAGATE ST12550W 0004" type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access sd0(ncr0:0:0): WIDE SCSI (16 bit) enabled. sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 2040MB (4178874 512 byte sectors) (ncr0:1:0): "SEAGATE ST15150W 0023" type 0 fixed SCSI 2 sd1(ncr0:1:0): Direct-Access sd1(ncr0:1:0): WIDE SCSI (16 bit) enabled. ncr0:1: ERROR (80:91) (9-ae-0) (0/1b) @ (d8c:19000004). script cmd = 89030000 reg: da 10 80 1b 47 00 01 07 23 09 81 ae 80 00 0e 08. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. ncr0: aborting job ... ncr0:0: ERROR (90:0) (8-a6-0) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 01 07 31 08 01 a6 80 00 0e 0a. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. ncr0: aborting job ... ncr0:0: ERROR (90:0) (8-a6-0) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 01 07 31 08 01 a6 80 00 0e 0a. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. ncr0: aborting job ... ncr0:0: ERROR (90:0) (8-a6-0) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 01 07 31 08 01 a6 80 00 0e 0a. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. ncr0: aborting job ... ncr0:0: ERROR (90:0) (8-a6-0) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 01 07 31 08 01 a6 80 00 0e 0a. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. sd1 could not mode sense (4). Using ficticious geometry ncr0: aborting job ... ncr0:0: ERROR (90:0) (8-a6-0) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 01 07 31 08 01 a6 80 00 0e 0a. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. ncr0: aborting job ... ncr0:0: ERROR (90:0) (8-a6-0) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 01 07 31 08 01 a6 80 00 0e 0a. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. ncr0: aborting job ... ncr0:0: ERROR (90:0) (8-a6-0) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 01 07 31 08 01 a6 80 00 0e 0a. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. ncr0: aborting job ... ncr0:0: ERROR (90:0) (8-a6-0) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 01 07 31 08 01 a6 80 00 0e 0a. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. ncr0: aborting job ... ncr0:0: ERROR (90:0) (8-a6-0) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 01 07 31 08 01 a6 80 00 0e 0a. ncr0: restart (fatal error). sd1(ncr0:1:0): COMMAND FAILED (9 ff) @f109b400. sd1: could not get size 0MB (0 512 byte sectors)