From owner-freebsd-stable@FreeBSD.ORG Fri Apr 1 18:54:04 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0AC1316A4CE for ; Fri, 1 Apr 2005 18:54:04 +0000 (GMT) Received: from magnum.mistaken-identity.co.uk (slayer-of.demon.co.uk [62.49.5.246]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9FCD743D5E for ; Fri, 1 Apr 2005 18:54:01 +0000 (GMT) (envelope-from gray@mistaken-identity.co.uk) MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1250" Content-Transfer-Encoding: quoted-printable Date: Fri, 1 Apr 2005 19:29:19 +0100 Content-class: urn:content-classes:message Message-ID: X-MimeOLE: Produced By Microsoft Exchange V6.5.6944.0 X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: RELENG_5 problems with Intel 855 (RELENG_4 boots fine) Thread-Index: AcU25s+VHnkpdb7FReOK3ZDcwZerUwABO3Sw From: "Gray Lilley" To: "Mike Tancsa" , Subject: RE: RELENG_5 problems with Intel 855 (RELENG_4 boots fine) X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Apr 2005 18:54:04 -0000 Can you try setting hw.pci.enable_io_modes=3D0 at the loader prompt then = booting? I've seen this same problem on a reasonable amount of machines now = (mainly toshiba/acer laptops, but not only) Regards, Graham Lilley Ibex Systems (Maidstone) Ltd -----Original Message----- From: owner-freebsd-stable@freebsd.org = [mailto:owner-freebsd-stable@freebsd.org] On Behalf Of Mike Tancsa Sent: 01 April 2005 19:39 To: freebsd-stable@freebsd.org Subject: RELENG_5 problems with Intel 855 (RELENG_4 boots fine) We are trying out an Intel 855 that is not able to boot RELENG_5. It = locks up hard (NUM LOCK doesnt work) on bootup at the same spot. = However, RELENG_4 is able to boot just fine. Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD 5.4-PRERELEASE #0: Fri Apr 1 09:06:22 EST 2005 mdtancsa@nfs.sentex.ca:/usr/obj/usr/src/sys/nfs ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz = 686-class=20 CPU) Origin =3D "GenuineIntel" Id =3D 0x695 Stepping =3D 5 = Features=3D0xa7e9fbbf real memory =3D 531496960 (506 MB) avail memory =3D 510435328 (486 MB) ioapic0 irqs 0-23 on motherboard npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 and boot -v /boot/kernel/acpi.ko text=3D0x41520 data=3D0x1da4+0x112c = syms=3D[0x4+0x7630+0x4+0x9c97] KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=3D01 base=3D0000000000000000 len=3D000000000009f400 SMAP = type=3D02 base=3D00000000000f0000 len=3D0000000000010000 SMAP type=3D02 = base=3D00000000fec00000 len=3D0000000001400000 SMAP type=3D03 = base=3D000000001fae3000 len=3D000000000000d000 SMAP type=3D04 = base=3D000000001fae0000 len=3D0000000000003000 SMAP type=3D02 = base=3D000000000009f400 len=3D0000000000000c00 SMAP type=3D02 = base=3D000000001faf0000 len=3D0000000000010000 SMAP type=3D01 = base=3D0000000000100000 len=3D000000001f9e0000 Copyright (c) 1992-2005 = The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD 5.4-PRERELEASE #0: Fri Apr 1 09:06:22 EST 2005 mdtancsa@nfs.sentex.ca:/usr/obj/usr/src/sys/nfs Preloaded elf kernel "/boot/kernel/kernel" at 0xc0857000. Preloaded elf module "/boot/kernel/usb.ko" at 0xc085721c. Preloaded elf module "/boot/modules/arcmsr.ko" at 0xc08572c4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0857370. Table 'FACP' at 0x1fae30c0 Table 'APIC' at 0x1fae6d40 MADT: Found table at 0x1fae6d40 MP Configuration Table version 1.4 found at 0xc00f0c00 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193068 Hz = CLK_USE_I8254_CALIBRATION not specified - using default frequency = Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock = ... TSC clock: 1500060146 Hz CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz = 686-class=20 CPU) Origin =3D "GenuineIntel" Id =3D 0x695 Stepping =3D 5 = Features=3D0xa7e9fbbf real memory =3D 531496960 (506 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) = 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) = 0x0000000000c25000 - 0x000000001f1c6fff, 509222912 bytes (124322 pages) = avail memory =3D 510435328 (486 MB) bios32: Found BIOS32 Service Directory header at 0xc00faf00 bios32: Entry =3D 0xfb380 (c00fb380) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xb3b0 pnpbios: Found PnP BIOS data at 0xc00fbd70 pnpbios: Entry =3D f0000:bda0 Rev =3D 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> null: io: random: mem: Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there = (id=3D35808086) pcibios: BIOS version 2.10 Found $PIR table, 13 entries at 0xc00fde90 PCI-Only Interrupts: 5 7 10 = 11 12 Location Bus Device Pin Link IRQs slot 1 2 8 A 0x68 3 4 5 7 9 10 11 12 14 15 slot 1 2 8 B 0x69 3 4 5 7 9 10 11 12 14 15 slot 1 2 8 C 0x6a 3 4 5 7 9 10 11 12 14 15 slot 1 2 8 D 0x6b 3 4 5 7 9 10 11 12 14 15 slot 2 2 4 A 0x60 3 4 5 7 9 10 11 12 14 15 slot 2 2 4 B 0x61 3 4 5 7 9 10 11 12 14 15 slot 2 2 4 C 0x62 3 4 5 7 9 10 11 12 14 15 slot 2 2 4 D 0x63 3 4 5 7 9 10 11 12 14 15 slot 3 2 5 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 3 2 5 B 0x62 3 4 5 7 9 10 11 12 14 15 slot 3 2 5 C 0x63 3 4 5 7 9 10 11 12 14 15 slot 3 2 5 D 0x60 3 4 5 7 9 10 11 12 14 15 slot 4 2 6 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 4 2 6 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 4 2 6 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 4 2 6 D 0x61 3 4 5 7 9 10 11 12 14 15 slot 5 2 0 A 0x68 3 4 5 7 9 10 11 12 14 15 slot 5 2 0 B 0x69 3 4 5 7 9 10 11 12 14 15 slot 5 2 0 C 0x6a 3 4 5 7 9 10 11 12 14 15 slot 5 2 0 D 0x6b 3 4 5 7 9 10 11 12 14 15 slot 6 2 1 A 0x69 3 4 5 7 9 10 11 12 14 15 slot 6 2 1 B 0x6a 3 4 5 7 9 10 11 12 14 15 slot 6 2 1 C 0x6b 3 4 5 7 9 10 11 12 14 15 slot 6 2 1 D 0x68 3 4 5 7 9 10 11 12 14 15 slot 7 2 2 A 0x6a 3 4 5 7 9 10 11 12 14 15 slot 7 2 2 B 0x6b 3 4 5 7 9 10 11 12 14 15 slot 7 2 2 C 0x68 3 4 5 7 9 10 11 12 14 15 slot 7 2 2 D 0x69 3 4 5 7 9 10 11 12 14 15 slot 8 2 3 A 0x6b 3 4 5 7 9 10 11 12 14 15 slot 8 2 3 B 0x68 3 4 5 7 9 10 11 12 14 15 slot 8 2 3 C 0x69 3 4 5 7 9 10 11 12 14 15 slot 8 2 3 D 0x6a 3 4 5 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 2 B 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 2 C 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 2 D 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 31 C 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter = "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 unknown: not probed (disabled) cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x4010 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link = initial configuration: pci0: on pcib0 pci0: physical bus=3D0 map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=3D0x8086, dev=3D0x3580, revid=3D0x02 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x8086, dev=3D0x3584, revid=3D0x02 bus=3D0, slot=3D0, func=3D1 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x8086, dev=3D0x3585, revid=3D0x02 bus=3D0, slot=3D0, func=3D3 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x8086, dev=3D0x3581, revid=3D0x02 bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) map[10]: type 3, range 32, base e0000000, size 27, enabled map[14]: type 1, range 32, base ed000000, size 19, enabled map[18]: type 4, range 32, base 0000e300, size 3, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x3582, revid=3D0x02 bus=3D0, slot=3D2, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) intpin=3Da, irq=3D16 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 3, range 32, base 00000000, size 27, memory = disabled But RELENG_4 works fine. I think its getting hung up on the onboard = NICs, not sure. However, I can load them as a KLD. If I disable the = NICs in the BIOS, it still hangs on the same location FreeBSD 4.10-STABLE #1: Fri Nov 12 10:17:46 EST 2004 mdtancsa@stationtest.sentex.ca:/usr/obj/usr/src/sys/gas Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency = 1500059328 Hz CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz = 686-class=20 CPU) Origin =3D "GenuineIntel" Id =3D 0x695 Stepping =3D 5 = Features=3D0xa7e9fbbf real memory =3D 531496960 (519040K bytes) config> q avail memory =3D 513236992 (501208K bytes) Preloaded elf kernel "kernel" = at 0xc03d5000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d509c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 13 entries at 0xc00fde90 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 agp0: mem 0xe8000000-0xebffffff at = device 0.0 on pci0 pci0: (vendor=3D0x8086, dev=3D0x3584) at 0.1 pci0: (vendor=3D0x8086, dev=3D0x3585) at 0.3 pcib1: at device 1.0 = on pci0 pci1: on pcib1 agp1: port 0xe300-0xe307 = mem 0xec100000-0xec17ffff,0xe0000000-0xe7ffffff irq 10 at device 2.0 on = pci0 agp1: detected 3964k stolen memory agp1: aperture size is 128M pci0: (vendor=3D0x8086, dev=3D0x3582) at 2.1 uhci0: port 0xe000-0xe01f = irq 10 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xe100-0xe11f = irq 9 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xe200-0xe21f = irq 7 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at 29.7 irq 5 pcib2: at device 30.0 = on pci0 pci2: on pcib2 pci2: (vendor=3D0x11ab, dev=3D0x4320) at 0.0 irq 11 pci2: (vendor=3D0x11ab, dev=3D0x4320) at 1.0 irq 15 isab0: at device 31.0 = on pci0 isa0: on isab0 atapci0: port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ichsmb0: port 0x5000-0x501f irq = 12 at device 31.3 on pci0 smbus0: on ichsmb0 smb0: on smbus0 pci0: (vendor=3D0x8086, dev=3D0x24c5) at 31.5 irq 12 orm0: