Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 3 May 2011 17:37:24 +0000 (UTC)
From:      John Baldwin <jhb@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r221393 - in head/sys: amd64/pci conf dev/acpica dev/pci i386/pci sparc64/pci x86/pci x86/x86
Message-ID:  <201105031737.p43HbOM5004112@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: jhb
Date: Tue May  3 17:37:24 2011
New Revision: 221393
URL: http://svn.freebsd.org/changeset/base/221393

Log:
  Reimplement how PCI-PCI bridges manage their I/O windows.  Previously the
  driver would verify that requests for child devices were confined to any
  existing I/O windows, but the driver relied on the firmware to initialize
  the windows and would never grow the windows for new requests.  Now the
  driver actively manages the I/O windows.
  
  This is implemented by allocating a bus resource for each I/O window from
  the parent PCI bus and suballocating that resource to child devices.  The
  suballocations are managed by creating an rman for each I/O window.  The
  suballocated resources are mapped by passing the bus_activate_resource()
  call up to the parent PCI bus.  Windows are grown when needed by using
  bus_adjust_resource() to adjust the resource allocated from the parent PCI
  bus.  If the adjust request succeeds, the window is adjusted and the
  suballocation request for the child device is retried.
  
  When growing a window, the rman_first_free_region() and
  rman_last_free_region() routines are used to determine if the front or
  end of the existing I/O window is free.  From using that, the smallest
  ranges that need to be added to either the front or back of the window
  are computed.  The driver will first try to grow the window in whichever
  direction requires the smallest growth first followed by the other
  direction if that fails.
  
  Subtractive bridges will first attempt to satisfy requests for child
  resources from I/O windows (including attempts to grow the windows).  If
  that fails, the request is passed up to the parent PCI bus directly
  however.
  
  The PCI-PCI bridge driver will try to use firmware-assigned ranges for
  child BARs first and only allocate a "fresh" range if that specific range
  cannot be accommodated in the I/O window.  This allows systems where the
  firmware assigns resources during boot but later wipes the I/O windows
  (some ACPI BIOSen are known to do this) to "rediscover" the original I/O
  window ranges.
  
  The ACPI Host-PCI bridge driver has been adjusted to correctly honor
  hw.acpi.host_mem_start and the I/O port equivalent when a PCI-PCI bridge
  makes a wildcard request for an I/O window range.
  
  The new PCI-PCI bridge driver is only enabled if the NEW_PCIB kernel option
  is enabled.  This is a transition aide to allow platforms that do not
  yet support bus_activate_resource() and bus_adjust_resource() in their
  Host-PCI bridge drivers (and possibly other drivers as needed) to use the
  old driver for now.  Once all platforms support the new driver, the
  kernel option and old driver will be removed.
  
  PR:		kern/143874 kern/149306
  Tested by:	mav

Modified:
  head/sys/amd64/pci/pci_bus.c
  head/sys/conf/options
  head/sys/dev/acpica/acpi_pcib_acpi.c
  head/sys/dev/acpica/acpi_pcib_pci.c
  head/sys/dev/pci/pci.c
  head/sys/dev/pci/pci_pci.c
  head/sys/dev/pci/pcib_private.h
  head/sys/i386/pci/pci_bus.c
  head/sys/sparc64/pci/apb.c
  head/sys/sparc64/pci/ofw_pcib.c
  head/sys/x86/pci/qpi.c
  head/sys/x86/x86/mptable_pci.c

Modified: head/sys/amd64/pci/pci_bus.c
==============================================================================
--- head/sys/amd64/pci/pci_bus.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/amd64/pci/pci_bus.c	Tue May  3 17:37:24 2011	(r221393)
@@ -35,6 +35,7 @@ __FBSDID("$FreeBSD$");
 #include <sys/kernel.h>
 #include <sys/malloc.h>
 #include <sys/module.h>
+#include <sys/rman.h>
 #include <sys/sysctl.h>
 
 #include <dev/pci/pcivar.h>

Modified: head/sys/conf/options
==============================================================================
--- head/sys/conf/options	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/conf/options	Tue May  3 17:37:24 2011	(r221393)
@@ -136,6 +136,7 @@ MFI_DEBUG	opt_mfi.h
 MFI_DECODE_LOG	opt_mfi.h
 MPROF_BUFFERS	opt_mprof.h
 MPROF_HASH_SIZE	opt_mprof.h
+NEW_PCIB	opt_global.h
 NO_ADAPTIVE_MUTEXES	opt_adaptive_mutexes.h
 NO_ADAPTIVE_RWLOCKS
 NO_ADAPTIVE_SX

Modified: head/sys/dev/acpica/acpi_pcib_acpi.c
==============================================================================
--- head/sys/dev/acpica/acpi_pcib_acpi.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/dev/acpica/acpi_pcib_acpi.c	Tue May  3 17:37:24 2011	(r221393)
@@ -34,6 +34,7 @@ __FBSDID("$FreeBSD$");
 #include <sys/kernel.h>
 #include <sys/malloc.h>
 #include <sys/module.h>
+#include <sys/rman.h>
 #include <sys/sysctl.h>
 
 #include <contrib/dev/acpica/include/acpi.h>
@@ -370,11 +371,17 @@ acpi_pcib_acpi_alloc_resource(device_t d
      * Hardcoding like this sucks, so a more MD/MI way needs to be
      * found to do it.  This is typically only used on older laptops
      * that don't have pci busses behind pci bridge, so assuming > 32MB
-     * is liekly OK.
+     * is likely OK.
+     *
+     * PCI-PCI bridges may allocate smaller ranges for their windows,
+     * but the heuristics here should apply to those, so we allow
+     * several different end addresses.
      */
-    if (type == SYS_RES_MEMORY && start == 0UL && end == ~0UL)
+    if (type == SYS_RES_MEMORY && start == 0UL && (end == ~0UL ||
+	end == 0xffffffff))
 	start = acpi_host_mem_start;
-    if (type == SYS_RES_IOPORT && start == 0UL && end == ~0UL)
+    if (type == SYS_RES_IOPORT && start == 0UL && (end == ~0UL ||
+	end == 0xffff || end == 0xffffffff))
 	start = 0x1000;
     return (bus_generic_alloc_resource(dev, child, type, rid, start, end,
 	count, flags));

Modified: head/sys/dev/acpica/acpi_pcib_pci.c
==============================================================================
--- head/sys/dev/acpica/acpi_pcib_pci.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/dev/acpica/acpi_pcib_pci.c	Tue May  3 17:37:24 2011	(r221393)
@@ -35,6 +35,7 @@ __FBSDID("$FreeBSD$");
 #include <sys/kernel.h>
 #include <sys/malloc.h>
 #include <sys/module.h>
+#include <sys/rman.h>
 
 #include <contrib/dev/acpica/include/acpi.h>
 #include <contrib/dev/acpica/include/accommon.h>

Modified: head/sys/dev/pci/pci.c
==============================================================================
--- head/sys/dev/pci/pci.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/dev/pci/pci.c	Tue May  3 17:37:24 2011	(r221393)
@@ -3967,6 +3967,26 @@ pci_alloc_resource(device_t dev, device_
 		break;
 	case SYS_RES_IOPORT:
 	case SYS_RES_MEMORY:
+#ifdef NEW_PCIB
+		/*
+		 * PCI-PCI bridge I/O window resources are not BARs.
+		 * For those allocations just pass the request up the
+		 * tree.
+		 */
+		if (cfg->hdrtype == PCIM_HDRTYPE_BRIDGE) {
+			switch (*rid) {
+			case PCIR_IOBASEL_1:
+			case PCIR_MEMBASE_1:
+			case PCIR_PMBASEL_1:
+				/*
+				 * XXX: Should we bother creating a resource
+				 * list entry?
+				 */
+				return (bus_generic_alloc_resource(dev, child,
+				    type, rid, start, end, count, flags));
+			}
+		}
+#endif
 		/* Reserve resources for this BAR if needed. */
 		rle = resource_list_find(rl, type, *rid);
 		if (rle == NULL) {

Modified: head/sys/dev/pci/pci_pci.c
==============================================================================
--- head/sys/dev/pci/pci_pci.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/dev/pci/pci_pci.c	Tue May  3 17:37:24 2011	(r221393)
@@ -36,14 +36,16 @@ __FBSDID("$FreeBSD$");
  */
 
 #include <sys/param.h>
-#include <sys/systm.h>
+#include <sys/bus.h>
 #include <sys/kernel.h>
+#include <sys/libkern.h>
+#include <sys/malloc.h>
 #include <sys/module.h>
-#include <sys/bus.h>
-#include <machine/bus.h>
 #include <sys/rman.h>
 #include <sys/sysctl.h>
+#include <sys/systm.h>
 
+#include <machine/bus.h>
 #include <machine/resource.h>
 
 #include <dev/pci/pcivar.h>
@@ -73,8 +75,13 @@ static device_method_t pcib_methods[] = 
     DEVMETHOD(bus_read_ivar,		pcib_read_ivar),
     DEVMETHOD(bus_write_ivar,		pcib_write_ivar),
     DEVMETHOD(bus_alloc_resource,	pcib_alloc_resource),
+#ifdef NEW_PCIB
+    DEVMETHOD(bus_adjust_resource,	pcib_adjust_resource),
+    DEVMETHOD(bus_release_resource,	pcib_release_resource),
+#else
     DEVMETHOD(bus_adjust_resource,	bus_generic_adjust_resource),
     DEVMETHOD(bus_release_resource,	bus_generic_release_resource),
+#endif
     DEVMETHOD(bus_activate_resource,	bus_generic_activate_resource),
     DEVMETHOD(bus_deactivate_resource,	bus_generic_deactivate_resource),
     DEVMETHOD(bus_setup_intr,		bus_generic_setup_intr),
@@ -100,6 +107,243 @@ static devclass_t pcib_devclass;
 DEFINE_CLASS_0(pcib, pcib_driver, pcib_methods, sizeof(struct pcib_softc));
 DRIVER_MODULE(pcib, pci, pcib_driver, pcib_devclass, 0, 0);
 
+#ifdef NEW_PCIB
+/*
+ * XXX Todo:
+ * - properly handle the ISA enable bit.  If it is set, we should change
+ *   the behavior of the I/O window resource and rman to not allocate the
+ *   blocked ranges (upper 768 bytes of each 1K in the first 64k of the
+ *   I/O port address space).
+ */
+
+/*
+ * Is a resource from a child device sub-allocated from one of our
+ * resource managers?
+ */
+static int
+pcib_is_resource_managed(struct pcib_softc *sc, int type, struct resource *r)
+{
+
+	switch (type) {
+	case SYS_RES_IOPORT:
+		return (rman_is_region_manager(r, &sc->io.rman));
+	case SYS_RES_MEMORY:
+		/* Prefetchable resources may live in either memory rman. */
+		if (rman_get_flags(r) & RF_PREFETCHABLE &&
+		    rman_is_region_manager(r, &sc->pmem.rman))
+			return (1);
+		return (rman_is_region_manager(r, &sc->mem.rman));
+	}
+	return (0);
+}
+
+static int
+pcib_is_window_open(struct pcib_window *pw)
+{
+
+	return (pw->valid && pw->base < pw->limit);
+}
+
+/*
+ * XXX: If RF_ACTIVE did not also imply allocating a bus space tag and
+ * handle for the resource, we could pass RF_ACTIVE up to the PCI bus
+ * when allocating the resource windows and rely on the PCI bus driver
+ * to do this for us.
+ */
+static void
+pcib_activate_window(struct pcib_softc *sc, int type)
+{
+
+	PCI_ENABLE_IO(device_get_parent(sc->dev), sc->dev, type);
+}
+
+static void
+pcib_write_windows(struct pcib_softc *sc, int mask)
+{
+	device_t dev;
+	uint32_t val;
+
+	dev = sc->dev;
+	if (sc->io.valid && mask & WIN_IO) {
+		val = pci_read_config(dev, PCIR_IOBASEL_1, 1);
+		if ((val & PCIM_BRIO_MASK) == PCIM_BRIO_32) {
+			pci_write_config(dev, PCIR_IOBASEH_1,
+			    sc->io.base >> 16, 2);
+			pci_write_config(dev, PCIR_IOLIMITH_1,
+			    sc->io.limit >> 16, 2);
+		}
+		pci_write_config(dev, PCIR_IOBASEL_1, sc->io.base >> 8, 1);
+		pci_write_config(dev, PCIR_IOLIMITL_1, sc->io.limit >> 8, 1);
+	}
+
+	if (mask & WIN_MEM) {
+		pci_write_config(dev, PCIR_MEMBASE_1, sc->mem.base >> 16, 2);
+		pci_write_config(dev, PCIR_MEMLIMIT_1, sc->mem.limit >> 16, 2);
+	}
+
+	if (sc->pmem.valid && mask & WIN_PMEM) {
+		val = pci_read_config(dev, PCIR_PMBASEL_1, 2);
+		if ((val & PCIM_BRPM_MASK) == PCIM_BRPM_64) {
+			pci_write_config(dev, PCIR_PMBASEH_1,
+			    sc->pmem.base >> 32, 4);
+			pci_write_config(dev, PCIR_PMLIMITH_1,
+			    sc->pmem.limit >> 32, 4);
+		}
+		pci_write_config(dev, PCIR_PMBASEL_1, sc->pmem.base >> 16, 2);
+		pci_write_config(dev, PCIR_PMLIMITL_1, sc->pmem.limit >> 16, 2);
+	}
+}
+
+static void
+pcib_alloc_window(struct pcib_softc *sc, struct pcib_window *w, int type,
+    int flags, pci_addr_t max_address)
+{
+	char buf[64];
+	int error, rid;
+
+	if (max_address != (u_long)max_address)
+		max_address = ~0ul;
+	w->rman.rm_start = 0;
+	w->rman.rm_end = max_address;
+	w->rman.rm_type = RMAN_ARRAY;
+	snprintf(buf, sizeof(buf), "%s %s window",
+	    device_get_nameunit(sc->dev), w->name);
+	w->rman.rm_descr = strdup(buf, M_DEVBUF);
+	error = rman_init(&w->rman);
+	if (error)
+		panic("Failed to initialize %s %s rman",
+		    device_get_nameunit(sc->dev), w->name);
+
+	if (!pcib_is_window_open(w))
+		return;
+
+	if (w->base > max_address || w->limit > max_address) {
+		device_printf(sc->dev,
+		    "initial %s window has too many bits, ignoring\n", w->name);
+		return;
+	}
+	rid = w->reg;
+	w->res = bus_alloc_resource(sc->dev, type, &rid, w->base, w->limit,
+	    w->limit - w->base + 1, flags);
+	if (w->res == NULL) {
+		device_printf(sc->dev,
+		    "failed to allocate initial %s window: %#jx-%#jx\n",
+		    w->name, (uintmax_t)w->base, (uintmax_t)w->limit);
+		w->base = max_address;
+		w->limit = 0;
+		pcib_write_windows(sc, w->mask);
+		return;
+	}
+	pcib_activate_window(sc, type);
+
+	error = rman_manage_region(&w->rman, rman_get_start(w->res),
+	    rman_get_end(w->res));
+	if (error)
+		panic("Failed to initialize rman with resource");
+}
+
+/*
+ * Initialize I/O windows.
+ */
+static void
+pcib_probe_windows(struct pcib_softc *sc)
+{
+	pci_addr_t max;
+	device_t dev;
+	uint32_t val;
+
+	dev = sc->dev;
+
+	/* Determine if the I/O port window is implemented. */
+	val = pci_read_config(dev, PCIR_IOBASEL_1, 1);
+	if (val == 0) {
+		/*
+		 * If 'val' is zero, then only 16-bits of I/O space
+		 * are supported.
+		 */
+		pci_write_config(dev, PCIR_IOBASEL_1, 0xff, 1);
+		if (pci_read_config(dev, PCIR_IOBASEL_1, 1) != 0) {
+			sc->io.valid = 1;
+			pci_write_config(dev, PCIR_IOBASEL_1, 0, 1);
+		}
+	} else
+		sc->io.valid = 1;
+
+	/* Read the existing I/O port window. */
+	if (sc->io.valid) {
+		sc->io.reg = PCIR_IOBASEL_1;
+		sc->io.step = 12;
+		sc->io.mask = WIN_IO;
+		sc->io.name = "I/O port";
+		if ((val & PCIM_BRIO_MASK) == PCIM_BRIO_32) {
+			sc->io.base = PCI_PPBIOBASE(
+			    pci_read_config(dev, PCIR_IOBASEH_1, 2), val);
+			sc->io.limit = PCI_PPBIOLIMIT(
+			    pci_read_config(dev, PCIR_IOLIMITH_1, 2),
+			    pci_read_config(dev, PCIR_IOLIMITL_1, 1));
+			max = 0xffffffff;
+		} else {
+			sc->io.base = PCI_PPBIOBASE(0, val);
+			sc->io.limit = PCI_PPBIOLIMIT(0,
+			    pci_read_config(dev, PCIR_IOLIMITL_1, 1));
+			max = 0xffff;
+		}
+		pcib_alloc_window(sc, &sc->io, SYS_RES_IOPORT, 0, max);
+	}
+
+	/* Read the existing memory window. */
+	sc->mem.valid = 1;
+	sc->mem.reg = PCIR_MEMBASE_1;
+	sc->mem.step = 20;
+	sc->mem.mask = WIN_MEM;
+	sc->mem.name = "memory";
+	sc->mem.base = PCI_PPBMEMBASE(0,
+	    pci_read_config(dev, PCIR_MEMBASE_1, 2));
+	sc->mem.limit = PCI_PPBMEMLIMIT(0,
+	    pci_read_config(dev, PCIR_MEMLIMIT_1, 2));
+	pcib_alloc_window(sc, &sc->mem, SYS_RES_MEMORY, 0, 0xffffffff);
+
+	/* Determine if the prefetchable memory window is implemented. */
+	val = pci_read_config(dev, PCIR_PMBASEL_1, 2);
+	if (val == 0) {
+		/*
+		 * If 'val' is zero, then only 32-bits of memory space
+		 * are supported.
+		 */
+		pci_write_config(dev, PCIR_PMBASEL_1, 0xffff, 2);
+		if (pci_read_config(dev, PCIR_PMBASEL_1, 2) != 0) {
+			sc->pmem.valid = 1;
+			pci_write_config(dev, PCIR_PMBASEL_1, 0, 2);
+		}
+	} else
+		sc->pmem.valid = 1;
+
+	/* Read the existing prefetchable memory window. */
+	if (sc->pmem.valid) {
+		sc->pmem.reg = PCIR_PMBASEL_1;
+		sc->pmem.step = 20;
+		sc->pmem.mask = WIN_PMEM;
+		sc->pmem.name = "prefetch";
+		if ((val & PCIM_BRPM_MASK) == PCIM_BRPM_64) {
+			sc->pmem.base = PCI_PPBMEMBASE(
+			    pci_read_config(dev, PCIR_PMBASEH_1, 4), val);
+			sc->pmem.limit = PCI_PPBMEMLIMIT(
+			    pci_read_config(dev, PCIR_PMLIMITH_1, 4),
+			    pci_read_config(dev, PCIR_PMLIMITL_1, 2));
+			max = 0xffffffffffffffff;
+		} else {
+			sc->pmem.base = PCI_PPBMEMBASE(0, val);
+			sc->pmem.limit = PCI_PPBMEMLIMIT(0,
+			    pci_read_config(dev, PCIR_PMLIMITL_1, 2));
+			max = 0xffffffff;
+		}
+		pcib_alloc_window(sc, &sc->pmem, SYS_RES_MEMORY,
+		    RF_PREFETCHABLE, max);
+	}
+}
+
+#else
+
 /*
  * Is the prefetch window open (eg, can we allocate memory in it?)
  */
@@ -230,6 +474,7 @@ pcib_set_mem_decode(struct pcib_softc *s
 		pci_write_config(dev, PCIR_PMLIMITH_1, pmemhi, 4);
 	pci_write_config(dev, PCIR_PMLIMITL_1, sc->pmemlimit >> 16, 2);
 }
+#endif
 
 /*
  * Get current bridge configuration.
@@ -247,10 +492,12 @@ pcib_cfg_save(struct pcib_softc *sc)
 	sc->subbus = pci_read_config(dev, PCIR_SUBBUS_1, 1);
 	sc->bridgectl = pci_read_config(dev, PCIR_BRIDGECTL_1, 2);
 	sc->seclat = pci_read_config(dev, PCIR_SECLAT_1, 1);
+#ifndef NEW_PCIB
 	if (sc->command & PCIM_CMD_PORTEN)
 		pcib_get_io_decode(sc);
 	if (sc->command & PCIM_CMD_MEMEN)
 		pcib_get_mem_decode(sc);
+#endif
 }
 
 /*
@@ -269,10 +516,14 @@ pcib_cfg_restore(struct pcib_softc *sc)
 	pci_write_config(dev, PCIR_SUBBUS_1, sc->subbus, 1);
 	pci_write_config(dev, PCIR_BRIDGECTL_1, sc->bridgectl, 2);
 	pci_write_config(dev, PCIR_SECLAT_1, sc->seclat, 1);
+#ifdef NEW_PCIB
+	pcib_write_windows(sc, WIN_IO | WIN_MEM | WIN_PMEM);
+#else
 	if (sc->command & PCIM_CMD_PORTEN)
 		pcib_set_io_decode(sc);
 	if (sc->command & PCIM_CMD_MEMEN)
 		pcib_set_mem_decode(sc);
+#endif
 }
 
 /*
@@ -389,18 +640,35 @@ pcib_attach_common(device_t dev)
     if ((pci_get_devid(dev) & 0xff00ffff) == 0x24008086 ||
       pci_read_config(dev, PCIR_PROGIF, 1) == PCIP_BRIDGE_PCI_SUBTRACTIVE)
 	sc->flags |= PCIB_SUBTRACTIVE;
-	
+
+#ifdef NEW_PCIB
+    pcib_probe_windows(sc);
+#endif
     if (bootverbose) {
 	device_printf(dev, "  domain            %d\n", sc->domain);
 	device_printf(dev, "  secondary bus     %d\n", sc->secbus);
 	device_printf(dev, "  subordinate bus   %d\n", sc->subbus);
-	device_printf(dev, "  I/O decode        0x%x-0x%x\n", sc->iobase, sc->iolimit);
+#ifdef NEW_PCIB
+	if (pcib_is_window_open(&sc->io))
+	    device_printf(dev, "  I/O decode        0x%jx-0x%jx\n",
+	      (uintmax_t)sc->io.base, (uintmax_t)sc->io.limit);
+	if (pcib_is_window_open(&sc->mem))
+	    device_printf(dev, "  memory decode     0x%jx-0x%jx\n",
+	      (uintmax_t)sc->mem.base, (uintmax_t)sc->mem.limit);
+	if (pcib_is_window_open(&sc->pmem))
+	    device_printf(dev, "  prefetched decode 0x%jx-0x%jx\n",
+	      (uintmax_t)sc->pmem.base, (uintmax_t)sc->pmem.limit);
+#else
+	if (pcib_is_io_open(sc))
+	    device_printf(dev, "  I/O decode        0x%x-0x%x\n",
+	      sc->iobase, sc->iolimit);
 	if (pcib_is_nonprefetch_open(sc))
 	    device_printf(dev, "  memory decode     0x%jx-0x%jx\n",
 	      (uintmax_t)sc->membase, (uintmax_t)sc->memlimit);
 	if (pcib_is_prefetch_open(sc))
 	    device_printf(dev, "  prefetched decode 0x%jx-0x%jx\n",
 	      (uintmax_t)sc->pmembase, (uintmax_t)sc->pmemlimit);
+#endif
 	else
 	    device_printf(dev, "  no prefetched decode\n");
 	if (sc->flags & PCIB_SUBTRACTIVE)
@@ -502,6 +770,377 @@ pcib_write_ivar(device_t dev, device_t c
     return(ENOENT);
 }
 
+#ifdef NEW_PCIB
+static const char *
+pcib_child_name(device_t child)
+{
+	static char buf[64];
+
+	if (device_get_nameunit(child) != NULL)
+		return (device_get_nameunit(child));
+	snprintf(buf, sizeof(buf), "pci%d:%d:%d:%d", pci_get_domain(child),
+	    pci_get_bus(child), pci_get_slot(child), pci_get_function(child));
+	return (buf);
+}
+
+/*
+ * Attempt to allocate a resource from the existing resources assigned
+ * to a window.
+ */
+static struct resource *
+pcib_suballoc_resource(struct pcib_softc *sc, struct pcib_window *w,
+    device_t child, int type, int *rid, u_long start, u_long end, u_long count,
+    u_int flags)
+{
+	struct resource *res;
+
+	if (!pcib_is_window_open(w))
+		return (NULL);
+
+	res = rman_reserve_resource(&w->rman, start, end, count,
+	    flags & ~RF_ACTIVE, child);
+	if (res == NULL)
+		return (NULL);
+
+	if (bootverbose)
+		device_printf(sc->dev,
+		    "allocated %s range (%#lx-%#lx) for rid %x of %s\n",
+		    w->name, rman_get_start(res), rman_get_end(res), *rid,
+		    pcib_child_name(child));
+	rman_set_rid(res, *rid);
+
+	/*
+	 * If the resource should be active, pass that request up the
+	 * tree.  This assumes the parent drivers can handle
+	 * activating sub-allocated resources.
+	 */
+	if (flags & RF_ACTIVE) {
+		if (bus_activate_resource(child, type, *rid, res) != 0) {
+			rman_release_resource(res);
+			return (NULL);
+		}
+	}
+
+	return (res);
+}
+
+/*
+ * Attempt to grow a window to make room for a given resource request.
+ * The 'step' parameter is log_2 of the desired I/O window's alignment.
+ */
+static int
+pcib_grow_window(struct pcib_softc *sc, struct pcib_window *w, int type,
+    u_long start, u_long end, u_long count, u_int flags)
+{
+	u_long align, start_free, end_free, front, back;
+	int error, rid;
+
+	/*
+	 * Clamp the desired resource range to the maximum address
+	 * this window supports.  Reject impossible requests.
+	 */
+	if (!w->valid)
+		return (EINVAL);
+	if (end > w->rman.rm_end)
+		end = w->rman.rm_end;
+	if (start + count - 1 > end || start + count < start)
+		return (EINVAL);
+
+	/*
+	 * If there is no resource at all, just try to allocate enough
+	 * aligned space for this resource.
+	 */
+	if (w->res == NULL) {
+		if (RF_ALIGNMENT(flags) < w->step) {
+			flags &= ~RF_ALIGNMENT_MASK;
+			flags |= RF_ALIGNMENT_LOG2(w->step);
+		}
+		start &= ~((1ul << w->step) - 1);
+		end |= ((1ul << w->step) - 1);
+		count = roundup2(count, 1ul << w->step);
+		rid = w->reg;
+		w->res = bus_alloc_resource(sc->dev, type, &rid, start, end,
+		    count, flags & ~RF_ACTIVE);
+		if (w->res == NULL) {
+			if (bootverbose)
+				device_printf(sc->dev,
+		    "failed to allocate initial %s window (%#lx-%#lx,%#lx)\n",
+				    w->name, start, end, count);
+			return (ENXIO);
+		}
+		if (bootverbose)
+			device_printf(sc->dev,
+			    "allocated initial %s window of %#lx-%#lx\n",
+			    w->name, rman_get_start(w->res),
+			    rman_get_end(w->res));
+		error = rman_manage_region(&w->rman, rman_get_start(w->res),
+		    rman_get_end(w->res));
+		if (error) {
+			if (bootverbose)
+				device_printf(sc->dev,
+				    "failed to add initial %s window to rman\n",
+				    w->name);
+			bus_release_resource(sc->dev, type, w->reg, w->res);
+			w->res = NULL;
+			return (error);
+		}
+		pcib_activate_window(sc, type);
+		goto updatewin;
+	}
+
+	/*
+	 * See if growing the window would help.  Compute the minimum
+	 * amount of address space needed on both the front and back
+	 * ends of the existing window to satisfy the allocation.
+	 *
+	 * For each end, build a candidate region adjusting for the
+	 * required alignment, etc.  If there is a free region at the
+	 * edge of the window, grow from the inner edge of the free
+	 * region.  Otherwise grow from the window boundary.
+	 *
+	 * XXX: Special case: if w->res is completely empty and the
+	 * request size is larger than w->res, we should find the
+	 * optimal aligned buffer containing w->res and allocate that.
+	 */
+	if (bootverbose)
+		device_printf(sc->dev,
+		    "attempting to grow %s window for (%#lx-%#lx,%#lx)\n",
+		    w->name, start, end, count);
+	align = 1ul << RF_ALIGNMENT(flags);
+	if (start < rman_get_start(w->res)) {
+		if (rman_first_free_region(&w->rman, &start_free, &end_free) !=
+		    0 || start_free != rman_get_start(w->res))
+			end_free = rman_get_start(w->res) - 1;
+		if (end_free > end)
+			end_free = end;
+
+		/* Move end_free down until it is properly aligned. */
+		end_free &= ~(align - 1);
+		front = end_free - count;
+
+		/*
+		 * The resource would now be allocated at (front,
+		 * end_free).  Ensure that fits in the (start, end)
+		 * bounds.  end_free is checked above.  If 'front' is
+		 * ok, ensure it is properly aligned for this window.
+		 * Also check for underflow.
+		 */
+		if (front >= start && front <= end_free) {
+			if (bootverbose)
+				printf("\tfront candidate range: %#lx-%#lx\n",
+				    front, end_free);
+			front &= (1ul << w->step) - 1;
+			front = rman_get_start(w->res) - front;
+		} else
+			front = 0;
+	} else
+		front = 0;
+	if (end > rman_get_end(w->res)) {
+		if (rman_last_free_region(&w->rman, &start_free, &end_free) !=
+		    0 || end_free != rman_get_end(w->res))
+			start_free = rman_get_end(w->res) + 1;
+		if (start_free < start)
+			start_free = start;
+
+		/* Move start_free up until it is properly aligned. */
+		start_free = roundup2(start_free, align);
+		back = start_free + count;
+
+		/*
+		 * The resource would now be allocated at (start_free,
+		 * back).  Ensure that fits in the (start, end)
+		 * bounds.  start_free is checked above.  If 'back' is
+		 * ok, ensure it is properly aligned for this window.
+		 * Also check for overflow.
+		 */
+		if (back <= end && start_free <= back) {
+			if (bootverbose)
+				printf("\tback candidate range: %#lx-%#lx\n",
+				    start_free, back);
+			back = roundup2(back, w->step) - 1;
+			back -= rman_get_end(w->res);
+		} else
+			back = 0;
+	} else
+		back = 0;
+
+	/*
+	 * Try to allocate the smallest needed region first.
+	 * If that fails, fall back to the other region.
+	 */
+	error = ENOSPC;
+	while (front != 0 || back != 0) {
+		if (front != 0 && (front <= back || back == 0)) {
+			error = bus_adjust_resource(sc->dev, type, w->res,
+			    rman_get_start(w->res) - front,
+			    rman_get_end(w->res));
+			if (error == 0)
+				break;
+			front = 0;
+		} else {
+			error = bus_adjust_resource(sc->dev, type, w->res,
+			    rman_get_start(w->res),
+			    rman_get_end(w->res) + back);
+			if (error == 0)
+				break;
+			back = 0;
+		}
+	}
+
+	if (error)
+		return (error);
+	if (bootverbose)
+		device_printf(sc->dev, "grew %s window to %#lx-%#lx\n",
+		    w->name, rman_get_start(w->res), rman_get_end(w->res));
+
+	/* Add the newly allocated region to the resource manager. */
+	if (w->base != rman_get_start(w->res)) {
+		KASSERT(w->limit == rman_get_end(w->res), ("both ends moved"));
+		error = rman_manage_region(&w->rman, rman_get_start(w->res),
+		    w->base - 1);
+	} else {
+		KASSERT(w->limit != rman_get_end(w->res),
+		    ("neither end moved"));
+		error = rman_manage_region(&w->rman, w->limit + 1,
+		    rman_get_end(w->res));
+	}
+	if (error) {
+		if (bootverbose)
+			device_printf(sc->dev,
+			    "failed to expand %s resource manager\n", w->name);
+		bus_adjust_resource(sc->dev, type, w->res, w->base, w->limit);
+		return (error);
+	}
+
+updatewin:
+	/* Save the new window. */
+	w->base = rman_get_start(w->res);
+	w->limit = rman_get_end(w->res);
+	KASSERT((w->base & ((1ul << w->step) - 1)) == 0,
+	    ("start address is not aligned"));
+	KASSERT((w->limit & ((1ul << w->step) - 1)) == (1ul << w->step) - 1,
+	    ("end address is not aligned"));
+	pcib_write_windows(sc, w->mask);
+	return (0);
+}
+
+/*
+ * We have to trap resource allocation requests and ensure that the bridge
+ * is set up to, or capable of handling them.
+ */
+struct resource *
+pcib_alloc_resource(device_t dev, device_t child, int type, int *rid,
+    u_long start, u_long end, u_long count, u_int flags)
+{
+	struct pcib_softc *sc;
+	struct resource *r;
+
+	sc = device_get_softc(dev);
+
+	/*
+	 * VGA resources are decoded iff the VGA enable bit is set in
+	 * the bridge control register.  VGA resources do not fall into
+	 * the resource windows and are passed up to the parent.
+	 */
+	if ((type == SYS_RES_IOPORT && pci_is_vga_ioport_range(start, end)) ||
+	    (type == SYS_RES_MEMORY && pci_is_vga_memory_range(start, end))) {
+		if (sc->bridgectl & PCIB_BCR_VGA_ENABLE)
+			return (bus_generic_alloc_resource(dev, child, type,
+			    rid, start, end, count, flags));
+		else
+			return (NULL);
+	}
+
+	switch (type) {
+	case SYS_RES_IOPORT:
+		r = pcib_suballoc_resource(sc, &sc->io, child, type, rid, start,
+		    end, count, flags);
+		if (r != NULL)
+			break;
+		if (pcib_grow_window(sc, &sc->io, type, start, end, count,
+		    flags) == 0)
+			r = pcib_suballoc_resource(sc, &sc->io, child, type,
+			    rid, start, end, count, flags);
+		break;
+	case SYS_RES_MEMORY:
+		/*
+		 * For prefetchable resources, prefer the prefetchable
+		 * memory window, but fall back to the regular memory
+		 * window if that fails.  Try both windows before
+		 * attempting to grow a window in case the firmware
+		 * has used a range in the regular memory window to
+		 * map a prefetchable BAR.
+		 */
+		if (flags & RF_PREFETCHABLE) {
+			r = pcib_suballoc_resource(sc, &sc->pmem, child, type,
+			    rid, start, end, count, flags);
+			if (r != NULL)
+				break;
+		}
+		r = pcib_suballoc_resource(sc, &sc->mem, child, type, rid,
+		    start, end, count, flags);
+		if (r != NULL)
+			break;
+		if (flags & RF_PREFETCHABLE) {
+			if (pcib_grow_window(sc, &sc->pmem, type, start, end,
+			    count, flags) == 0) {
+				r = pcib_suballoc_resource(sc, &sc->pmem, child,
+				    type, rid, start, end, count, flags);
+				if (r != NULL)
+					break;
+			}
+		}
+		if (pcib_grow_window(sc, &sc->mem, type, start, end, count,
+		    flags & ~RF_PREFETCHABLE) == 0)
+			r = pcib_suballoc_resource(sc, &sc->mem, child, type,
+			    rid, start, end, count, flags);
+		break;
+	default:
+		return (bus_generic_alloc_resource(dev, child, type, rid,
+		    start, end, count, flags));
+	}
+
+	/*
+	 * If attempts to suballocate from the window fail but this is a
+	 * subtractive bridge, pass the request up the tree.
+	 */
+	if (sc->flags & PCIB_SUBTRACTIVE && r == NULL)
+		return (bus_generic_alloc_resource(dev, child, type, rid,
+		    start, end, count, flags));
+	return (r);
+}
+
+int
+pcib_adjust_resource(device_t bus, device_t child, int type, struct resource *r,
+    u_long start, u_long end)
+{
+	struct pcib_softc *sc;
+
+	sc = device_get_softc(bus);
+	if (pcib_is_resource_managed(sc, type, r))
+		return (rman_adjust_resource(r, start, end));
+	return (bus_generic_adjust_resource(bus, child, type, r, start, end));
+}
+
+int
+pcib_release_resource(device_t dev, device_t child, int type, int rid,
+    struct resource *r)
+{
+	struct pcib_softc *sc;
+	int error;
+
+	sc = device_get_softc(dev);
+	if (pcib_is_resource_managed(sc, type, r)) {
+		if (rman_get_flags(r) & RF_ACTIVE) {
+			error = bus_deactivate_resource(child, type, rid, r);
+			if (error)
+				return (error);
+		}
+		return (rman_release_resource(r));
+	}
+	return (bus_generic_release_resource(dev, child, type, rid, r));
+}
+#else
 /*
  * We have to trap resource allocation requests and ensure that the bridge
  * is set up to, or capable of handling them.
@@ -657,6 +1296,7 @@ pcib_alloc_resource(device_t dev, device
 	return (bus_generic_alloc_resource(dev, child, type, rid, start, end,
 	    count, flags));
 }
+#endif
 
 /*
  * PCIB interface.

Modified: head/sys/dev/pci/pcib_private.h
==============================================================================
--- head/sys/dev/pci/pcib_private.h	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/dev/pci/pcib_private.h	Tue May  3 17:37:24 2011	(r221393)
@@ -39,6 +39,24 @@
  */
 DECLARE_CLASS(pcib_driver);
 
+#ifdef NEW_PCIB
+#define	WIN_IO		0x1
+#define	WIN_MEM		0x2
+#define	WIN_PMEM	0x4
+
+struct pcib_window {
+	pci_addr_t	base;		/* base address */
+	pci_addr_t	limit;		/* topmost address */
+	struct rman	rman;
+	struct resource *res;
+	int		reg;		/* resource id from parent */
+	int		valid;
+	int		mask;		/* WIN_* bitmask of this window */
+	int		step;		/* log_2 of window granularity */
+	const char	*name;
+};
+#endif
+
 /*
  * Bridge-specific data.
  */
@@ -53,12 +71,18 @@ struct pcib_softc 
     u_int	pribus;		/* primary bus number */
     u_int	secbus;		/* secondary bus number */
     u_int	subbus;		/* subordinate bus number */
+#ifdef NEW_PCIB
+    struct pcib_window io;	/* I/O port window */
+    struct pcib_window mem;	/* memory window */
+    struct pcib_window pmem;	/* prefetchable memory window */
+#else
     pci_addr_t	pmembase;	/* base address of prefetchable memory */
     pci_addr_t	pmemlimit;	/* topmost address of prefetchable memory */
     pci_addr_t	membase;	/* base address of memory window */
     pci_addr_t	memlimit;	/* topmost address of memory window */
     uint32_t	iobase;		/* base address of port window */
     uint32_t	iolimit;	/* topmost address of port window */
+#endif
     uint16_t	secstat;	/* secondary bus status register */
     uint16_t	bridgectl;	/* bridge control register */
     uint8_t	seclat;		/* secondary bus latency timer */
@@ -74,6 +98,12 @@ int		pcib_read_ivar(device_t dev, device
 int		pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value);
 struct resource *pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, 
 					    u_long start, u_long end, u_long count, u_int flags);
+#ifdef NEW_PCIB
+int		pcib_adjust_resource(device_t bus, device_t child, int type,
+    struct resource *r, u_long start, u_long end);
+int		pcib_release_resource(device_t dev, device_t child, int type, int rid,
+    struct resource *r);
+#endif
 int		pcib_maxslots(device_t dev);
 uint32_t	pcib_read_config(device_t dev, u_int b, u_int s, u_int f, u_int reg, int width);
 void		pcib_write_config(device_t dev, u_int b, u_int s, u_int f, u_int reg, uint32_t val, int width);

Modified: head/sys/i386/pci/pci_bus.c
==============================================================================
--- head/sys/i386/pci/pci_bus.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/i386/pci/pci_bus.c	Tue May  3 17:37:24 2011	(r221393)
@@ -35,6 +35,7 @@ __FBSDID("$FreeBSD$");
 #include <sys/kernel.h>
 #include <sys/malloc.h>
 #include <sys/module.h>
+#include <sys/rman.h>
 #include <sys/sysctl.h>
 
 #include <dev/pci/pcivar.h>

Modified: head/sys/sparc64/pci/apb.c
==============================================================================
--- head/sys/sparc64/pci/apb.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/sparc64/pci/apb.c	Tue May  3 17:37:24 2011	(r221393)
@@ -48,6 +48,7 @@ __FBSDID("$FreeBSD$");
 #include <sys/kernel.h>
 #include <sys/module.h>
 #include <sys/bus.h>
+#include <sys/rman.h>
 
 #include <dev/ofw/ofw_bus.h>
 #include <dev/ofw/openfirm.h>

Modified: head/sys/sparc64/pci/ofw_pcib.c
==============================================================================
--- head/sys/sparc64/pci/ofw_pcib.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/sparc64/pci/ofw_pcib.c	Tue May  3 17:37:24 2011	(r221393)
@@ -42,6 +42,7 @@ __FBSDID("$FreeBSD$");
 #include <sys/kernel.h>
 #include <sys/libkern.h>
 #include <sys/module.h>
+#include <sys/rman.h>
 
 #include <dev/ofw/ofw_bus.h>
 #include <dev/ofw/openfirm.h>

Modified: head/sys/x86/pci/qpi.c
==============================================================================
--- head/sys/x86/pci/qpi.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/x86/pci/qpi.c	Tue May  3 17:37:24 2011	(r221393)
@@ -40,6 +40,7 @@ __FBSDID("$FreeBSD$");
 #include <sys/kernel.h>
 #include <sys/malloc.h>
 #include <sys/module.h>
+#include <sys/rman.h>
 #include <sys/systm.h>
 
 #include <machine/cputypes.h>

Modified: head/sys/x86/x86/mptable_pci.c
==============================================================================
--- head/sys/x86/x86/mptable_pci.c	Tue May  3 16:36:39 2011	(r221392)
+++ head/sys/x86/x86/mptable_pci.c	Tue May  3 17:37:24 2011	(r221393)
@@ -40,6 +40,7 @@ __FBSDID("$FreeBSD$");
 #include <sys/bus.h>
 #include <sys/kernel.h>
 #include <sys/module.h>
+#include <sys/rman.h>
 
 #include <dev/pci/pcireg.h>
 #include <dev/pci/pcivar.h>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201105031737.p43HbOM5004112>