Date: Wed, 8 Sep 2004 15:22:28 +0400 From: Ighor Poteryakhin <ighor@hotbox.ru> To: questions@FreeBSD.org Subject: xl driver for 3Com NIC Message-ID: <1082308213.20040908152228@hotbox.ru>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Good day! A have troubles to set up my 3Com EtherLink (xl) Network Card. Driver says 'no PHY found'. Hardware is 100% ok. 'messages' file is attahced. -- With best regards, Ighor mailto:ighor@hotbox.ru [-- Attachment #2 --] Sep 7 18:49:23 syslogd: kernel boot file is /boot/kernel/kernel Sep 7 18:49:23 kernel: Copyright (c) 1992-2004 The FreeBSD Project. Sep 7 18:49:23 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Sep 7 18:49:23 kernel: The Regents of the University of California. All rights reserved. Sep 7 18:49:23 kernel: FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 Sep 7 18:49:23 kernel: root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Sep 7 18:49:23 kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000. Sep 7 18:49:23 kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4. Sep 7 18:49:23 kernel: ACPI APIC Table: <IntelR AWRDACPI> Sep 7 18:49:23 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Sep 7 18:49:23 kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2806.37-MHz 686-class CPU) Sep 7 18:49:23 kernel: Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Sep 7 18:49:23 kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Sep 7 18:49:23 kernel: Hyperthreading: 2 logical CPUs Sep 7 18:49:23 kernel: real memory = 536805376 (511 MB) Sep 7 18:49:23 kernel: avail memory = 511766528 (488 MB) Sep 7 18:49:23 kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Sep 7 18:49:23 kernel: cpu0 (BSP): APIC ID: 0 Sep 7 18:49:23 kernel: cpu1 (AP): APIC ID: 1 Sep 7 18:49:23 kernel: ioapic0: Changing APIC ID to 2 Sep 7 18:49:23 kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard Sep 7 18:49:23 kernel: Pentium Pro MTRR support enabled Sep 7 18:49:23 kernel: npx0: [FAST] Sep 7 18:49:23 kernel: npx0: <math processor> on motherboard Sep 7 18:49:23 kernel: npx0: INT 16 interface Sep 7 18:49:23 kernel: acpi0: <IntelR AWRDACPI> on motherboard Sep 7 18:49:23 kernel: pcibios: BIOS version 2.10 Sep 7 18:49:23 kernel: Using $PIR table, 11 entries at 0xc00fde90 Sep 7 18:49:23 kernel: acpi0: Power Button (fixed) Sep 7 18:49:23 kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Sep 7 18:49:23 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 Sep 7 18:49:23 kernel: acpi_cpu0: <CPU> on acpi0 Sep 7 18:49:23 kernel: acpi_cpu1: <CPU> on acpi0 Sep 7 18:49:23 kernel: acpi_tz0: <Thermal Zone> on acpi0 Sep 7 18:49:23 kernel: acpi_button0: <Power Button> on acpi0 Sep 7 18:49:23 kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Sep 7 18:49:23 kernel: pci0: <ACPI PCI bus> on pcib0 Sep 7 18:49:23 kernel: agp0: <Intel 82865 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 Sep 7 18:49:23 kernel: pcib1: <PCI-PCI bridge> at device 1.0 on pci0 Sep 7 18:49:23 kernel: pci1: <PCI bus> on pcib1 Sep 7 18:49:23 kernel: pcib1: slot 0 INTA is routed to irq 16 Sep 7 18:49:23 kernel: pci1: <display, VGA> at device 0.0 (no driver attached) Sep 7 18:49:23 kernel: uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0 Sep 7 18:49:23 kernel: usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 Sep 7 18:49:23 kernel: usb0: USB revision 1.0 Sep 7 18:49:23 kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Sep 7 18:49:23 kernel: uhub0: 2 ports with 2 removable, self powered Sep 7 18:49:23 kernel: ulpt0: hp deskjet 3600, rev 2.00/1.00, addr 2, iclass 7/1 Sep 7 18:49:23 kernel: ulpt0: using bi-directional mode Sep 7 18:49:23 kernel: uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq 19 at device 29.1 on pci0 Sep 7 18:49:23 kernel: usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 Sep 7 18:49:23 kernel: usb1: USB revision 1.0 Sep 7 18:49:23 kernel: uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Sep 7 18:49:23 kernel: uhub1: 2 ports with 2 removable, self powered Sep 7 18:49:23 kernel: uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq 18 at device 29.2 on pci0 Sep 7 18:49:23 kernel: usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 Sep 7 18:49:23 kernel: usb2: USB revision 1.0 Sep 7 18:49:23 kernel: uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Sep 7 18:49:23 kernel: uhub2: 2 ports with 2 removable, self powered Sep 7 18:49:23 kernel: uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 29.3 on pci0 Sep 7 18:49:23 kernel: usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 Sep 7 18:49:23 kernel: usb3: USB revision 1.0 Sep 7 18:49:23 kernel: uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Sep 7 18:49:23 kernel: uhub3: 2 ports with 2 removable, self powered Sep 7 18:49:23 kernel: pci0: <serial bus, USB> at device 29.7 (no driver attached) Sep 7 18:49:23 kernel: pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 Sep 7 18:49:23 kernel: pci2: <ACPI PCI bus> on pcib2 Sep 7 18:49:23 kernel: xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem 0xfb000000-0xfb00007f irq 20 at device 0.0 on pci2 Sep 7 18:49:23 kernel: xl0: Ethernet address: 00:0a:48:0c:89:a3 Sep 7 18:49:23 kernel: xl0: no PHY found! Sep 7 18:49:23 kernel: device_probe_and_attach: xl0 attach returned 6 Sep 7 18:49:23 kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0 Sep 7 18:49:23 kernel: isa0: <ISA bus> on isab0 Sep 7 18:49:23 kernel: atapci0: <Intel ICH5 SATA150 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 18 at device 31.2 on pci0 Sep 7 18:49:23 kernel: ata0: at 0x1f0 irq 14 on atapci0 Sep 7 18:49:23 kernel: ata0: [MPSAFE] Sep 7 18:49:23 kernel: ata1: at 0x170 irq 15 on atapci0 Sep 7 18:49:23 kernel: ata1: [MPSAFE] Sep 7 18:49:23 kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached) Sep 7 18:49:23 kernel: pci0: <multimedia, audio> at device 31.5 (no driver attached) Sep 7 18:49:23 kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 Sep 7 18:49:23 kernel: fdc0: FIFO enabled, 8 bytes threshold Sep 7 18:49:23 kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0 Sep 7 18:49:23 kernel: sio0: type 16550A Sep 7 18:49:23 kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0 Sep 7 18:49:23 kernel: sio1: type 16550A Sep 7 18:49:23 kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 Sep 7 18:49:23 kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode Sep 7 18:49:23 kernel: ppc0: FIFO with 16/16/9 bytes threshold Sep 7 18:49:23 kernel: ppbus0: <Parallel port bus> on ppc0 Sep 7 18:49:23 kernel: plip0: <PLIP network interface> on ppbus0 Sep 7 18:49:23 kernel: lpt0: <Printer> on ppbus0 Sep 7 18:49:23 kernel: lpt0: Interrupt-driven port Sep 7 18:49:23 kernel: ppi0: <Parallel I/O> on ppbus0 Sep 7 18:49:23 kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 Sep 7 18:49:23 kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Sep 7 18:49:23 kernel: kbd0 at atkbd0 Sep 7 18:49:23 kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Sep 7 18:49:23 kernel: psm0: model NetMouse/NetScroll Optical, device ID 0 Sep 7 18:49:23 kernel: orm0: <Option ROM> at iomem 0xd0000-0xd07ff on isa0 Sep 7 18:49:23 kernel: pmtimer0 on isa0 Sep 7 18:49:23 kernel: sc0: <System console> at flags 0x100 on isa0 Sep 7 18:49:23 kernel: sc0: VGA <16 virtual consoles, flags=0x300> Sep 7 18:49:23 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Sep 7 18:49:23 kernel: Timecounters tick every 10.000 msec Sep 7 18:49:23 kernel: acd0: DVDR <TOSHIBA ODD-DVD SD-R5272> at ata0-master PIO4 Sep 7 18:49:23 kernel: GEOM: create disk ad2 dp=0xc493a660 Sep 7 18:49:23 kernel: ad2: 76319MB <ST380013AS> [155061/16/63] at ata1-master UDMA100 Sep 7 18:49:23 kernel: SMP: AP CPU #1 Launched! Sep 7 18:49:23 kernel: Mounting root from ufs:/dev/ad2s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1082308213.20040908152228>