Date: Fri, 17 Jun 2022 17:29:43 -0500 From: Larry Rosenman <ler@lerctr.org> To: Alexander Motin <mav@freebsd.org> Cc: Freebsd current <freebsd-current@freebsd.org> Subject: Re: SAS/SATA controllers: 8 port that support 8TB Drives Message-ID: <5366dceb38e43bc5bd1e84cb90ea31ac@lerctr.org> In-Reply-To: <9ad99f2c-3d63-ccab-f730-e355f0297d72@FreeBSD.org> References: <96f9a47659ac052b8d806bb9b7ab2b51@lerctr.org> <1a795a4e-2b1e-2cba-484b-52811546e277@FreeBSD.org> <97624e2a4e0887ede029e71c47bb6060@lerctr.org> <9ad99f2c-3d63-ccab-f730-e355f0297d72@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 06/17/2022 5:24 pm, Alexander Motin wrote: > On 17.06.2022 18:16, Larry Rosenman wrote: >> On 06/17/2022 5:08 pm, Alexander Motin wrote: >>> On 17.06.2022 11:59, Larry Rosenman wrote: >>>> I'm looking to upgrade the controllers in my TrueNAS box to >>>> something that will >>>> support 8TB drives because apparently my LSI 2108 controllers do not >>>> support 8TB drives. >>>> >>>> What's the communities recommendation? >>>> needs to support SFF connectors for a total of 4 SFF connectors, as >>>> I have 16 slots. >>> >>> We at iX are still using LSI/Broadcom HBAs, just moved from long >>> discontinued mps(4) to newer mpr(4). And I don't believe the problem >>> is directly related to capacity. According to my observations it may >>> be Seagate HDDs of/above certain (8TB) generation. We do not use >>> Seagate HDDs in our products, so about that instability I only heard >>> from forums and TrueNAS community user reports. >> >> This is a mfi(4) set of controllers, and a ST80000Nm0045 8TB (CMR) >> drive. >> >> Is this a bad combo? >> >> mfi0: 9973 (708793330s/0x0002/WARN) - PD 00(e0xfc/s3) is not supported >> (probe0:mfi0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:mfi0:0:0:0): CAM status: CCB request completed with an error >> (probe0:mfi0:0:0:0): Retrying command, 3 more tries remain >> (probe0:mfi0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:mfi0:0:0:0): CAM status: CCB request completed with an error >> (probe0:mfi0:0:0:0): Retrying command, 2 more tries remain >> (probe0:mfi0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:mfi0:0:0:0): CAM status: CCB request completed with an error >> (probe0:mfi0:0:0:0): Retrying command, 1 more tries remain >> (probe0:mfi0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:mfi0:0:0:0): CAM status: CCB request completed with an error >> (probe0:mfi0:0:0:0): Retrying command, 0 more tries remain >> (probe0:mfi0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:mfi0:0:0:0): CAM status: CCB request completed with an error >> (probe0:mfi0:0:0:0): Error 5, Retries exhausted >> >> mfi0 Physical Drives: >> 0 ( 932G) UNCONFIGURED GOOD <ST8000NM0045-1RL UG07 serial=ZA1AC912> >> SATA E1:S3 > > mfi(4) are RAIDs, not HBAs. We do not recommend RAIDs with TrueNAS > due to problems with hot-plug, disk identification, etc. and so have > limited experience with them. But I know some of LSI RAIDs can be > reflashed into equivalent HBAs, so if they share the hardware, I can > speculate that they may share some issues. I bought 2 of these: https://www.ebay.com/itm/194910024856 to replace the 2 mfi(4)'s Hopefully I can just move the controllers and TrueNAS 13.0-RELEASE will just notice them. and pick up the new 8T disks. let me know if I'm setting myself up for failure. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 E-Mail: ler@lerctr.org US Mail: 5708 Sabbia Dr, Round Rock, TX 78665-2106
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5366dceb38e43bc5bd1e84cb90ea31ac>