Date: Sat, 18 Oct 2008 03:24:03 -0700 From: Jeremy Chadwick <koitsu@FreeBSD.org> To: Kristian Rooke <kristianr@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: SETFEATURES SET TRANSFER MODE taskqueue timeout.. Error occuring constantly.. Please help!! Message-ID: <20081018102403.GA46124@icarus.home.lan> In-Reply-To: <f9ccec500810180100j7969b1eeucb6e974f37b05961@mail.gmail.com> References: <f9ccec500810180100j7969b1eeucb6e974f37b05961@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Oct 18, 2008 at 07:00:42PM +1100, Kristian Rooke wrote: > Hi, > > I have a PC/box with 5 disks in it that I am using as a fileserver and > I recently upgraded some hardware and installed FreeBSD 7.0-RELEASE. > Previously I had a RAID PATA IDE controller on the motherboard (was > not using RAID functionality though), but I when I upgraded I had to > use a PCI IDE controller, due to the lack of PATA ports on the new > motherboard. > Now when I am attempting to write files, or do anything more than just > browse filesystems on the drives ad4-ad7, I get multiple occurrences > of the errors below. After these errors occur the kernel panics and I > need to perform a hard reset to get the server back up again. > > Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES SET > TRANSFER MODE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES SET > TRANSFER MODE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES ENABLE > RCACHE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES ENABLE > WCACHE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SET_MULTI taskqueue > timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES SET > TRANSFER MODE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES SET > TRANSFER MODE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES ENABLE > RCACHE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES ENABLE > WCACHE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SET_MULTI taskqueue > timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad6: FAILURE - WRITE_DMA timed out > LBA=163323135 > Sep 28 11:40:28 FileServer kernel: > g_vfs_done():ad6s1[WRITE(offset=83621412864, length=16384)]error = 5 > <some output omitted> > Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES SET > TRANSFER MODE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES SET > TRANSFER MODE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES ENABLE > RCACHE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES ENABLE > WCACHE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SET_MULTI taskqueue > timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES SET > TRANSFER MODE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES SET > TRANSFER MODE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES ENABLE > RCACHE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES ENABLE > WCACHE taskqueue timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SET_MULTI taskqueue > timeout - completing request directly > Sep 28 11:40:28 FileServer kernel: ad5: FAILURE - WRITE_DMA timed out LBA=287 > > I have taken a read through some previous conversations, but I can't > seem to find the answers I'm looking for. > > I've changed the IDE cables and the PATA controller and it is still > not making any difference. > > I also added hw.ata.ata_dma=0 to /boot/loader.conf as recommended in a > wiki I came across, but if anything it made the issue even worse. > > Can someone please help? Tracking these problems down takes a lot of time. I hope you have the time. :-) Can you please provide the following output: # dmesg # pciconf -lv # atacontrol list Also, please install ports/sysutils/smartmontools (version 5.38 or newer), and provide output for the following commands: # smartctl -a /dev/ad4 # smartctl -a /dev/ad5 # smartctl -a /dev/ad6 # smartctl -a /dev/ad7 Thanks. -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081018102403.GA46124>