Date: Mon, 16 Jul 2007 12:29:02 +0100 From: Vince <jhary@unsane.co.uk> To: Ganbold <ganbold@micom.mng.net> Cc: freebsd-x11@freebsd.org Subject: Re: Xorg 7.2 beryl problem on i945GM Message-ID: <469B567E.6030508@unsane.co.uk> In-Reply-To: <469B1EF4.8070609@micom.mng.net> References: <469B1EF4.8070609@micom.mng.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Ganbold wrote: > Hi, > > Sorry, posted to wrong list before. > > I'm having trouble running beryl on laptop with 945GM card. I have > current machine: > > devil# uname -an > FreeBSD devil.micom.mng.net 7.0-CURRENT FreeBSD 7.0-CURRENT #1: Tue Jul > 10 10:44:42 ULAT 2007 > root@devil.micom.mng.net:/usr/obj/usr/src/sys/DEVIL i386 > devil# > > Xorg is updated to 7.2. > > Now when I try to run beryl-manager a window becomes a white screen and > I can't do anything, although mouse moves. > I tried to look at http://wiki.freebsd.org/ModularXorg/, but couldn't > find anything. > Where can I find instructions/howto about running Xorg+beryl/compiz on > FreeBSD (with i945GM graphics)? Hi Ganbold, I have a i945GM chipset in my laptop and have beryl running with only minor issues ;) My rather messy xorg.conf is available at http://unsane.co.uk/~jhary/xorg.conf I use the the 915resolution port with the following options in rc.conf i915resolution_enable="YES" i915resolution_modes="5c" i915resolution_width="1440" i915resolution_height="900" FreeBSD prawn.unsane.co.uk 7.0-CURRENT FreeBSD 7.0-CURRENT #4: Fri Jul 13 11:39:09 BST 2007 toor@prawn.unsane.co.uk:/usr/obj/usr/src/sys/PRAWN7ULE i386 I have had issues in the past but they seem to have mainly cleared. emerald crashes from time to time (I think that may have been an issue with me upgradeing my ports though,) but otherwise beryl seems pretty stable for me. I run beryl with xfce4. All I did was install the beryl (and related) port(s) then ran beryl from a xterm in xfce4, after which xfce4 took care of having beryl as the windows manager. Hope this helps somehow. Vince > > I tried with following xorg config: > ... > Section "Module" > Load "extmod" > Load "record" > Load "dbe" > Load "glx" > Load "GLcore" > Load "xtrap" > Load "dri" > Load "freetype" > Load "type1" > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "NoAccel" # [<bool>] > #Option "SWcursor" # [<bool>] > #Option "ColorKey" # <i> > #Option "CacheLines" # <i> > #Option "Dac6Bit" # [<bool>] > #Option "DRI" # [<bool>] > #Option "NoDDC" # [<bool>] > #Option "ShowCache" # [<bool>] > #Option "XvMCSurfaces" # <i> > #Option "PageFlip" # [<bool>] > Identifier "Card0" > Driver "i810" > VendorName "Intel Corporation" > BoardName "Mobile 945GM/GMS/940GML Express Integrated Graphics > Controller" > BusID "PCI:0:2:0" > > Option "ForceBIOS" "1280x1024=1280x800" > # Option "ForceBIOS" "1280x1024=1440x900" > VideoRam 131072 > > Option "XAANoOffscreenPixmaps" "true" > # Option "DRI" "true" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > > DefaultDepth 24 > > # Option "AllowGLXWithComposite" "True" > # Option "RenderAccel" "True" > # Option "AddARGBGLXVisuals" "True" > > # Option "AIGLX" "True" > > SubSection "Display" > Modes "1280x800" > # Modes "1280x1080" > # Modes "1440x900" > Viewport 0 0 > Depth 24 > EndSubSection > > # SubSection "Display" > # Viewport 0 0 > # Depth 1 > # EndSubSection > # SubSection "Display" > # Viewport 0 0 > # Depth 4 > # EndSubSection > # SubSection "Display" > # Viewport 0 0 > # Depth 8 > # EndSubSection > # SubSection "Display" > # Viewport 0 0 > # Depth 15 > # EndSubSection > # SubSection "Display" > # Viewport 0 0 > # Depth 16 > # EndSubSection > # SubSection "Display" > # Viewport 0 0 > # Depth 24 > # EndSubSection > > EndSection > > Section "DRI" > Mode 0666 > EndSection > > Section "Extensions" > Option "Composite" "Enable" > EndSection > ------------------------------------------------------------------------- > > thanks in advance, > > Ganbold > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?469B567E.6030508>