Date: Tue, 25 May 1999 22:25:18 -0400 From: Pierre <pierre@globalserve.net> To: freebsd-net@freebsd.org Subject: [Fwd: Can't set Full Duplex on 3COM 3C905B-TX] Message-ID: <374B5B8E.FC4AF9D8@globalserve.net>
next in thread | raw e-mail | index | archive | help
I am using a 3COM TP400 Hub. Thanks Darcy for the quick response :) Darcy Buskermolen wrote: > 1st off, are you plugging it into a full duplex device at the other end? > like a full duplex switch ? > > At 09:35 PM 5/25/99 -0400, you wrote: > >I am having difficulty to make my nic using Duplex. The nic setting is > >autodetect, but even I tried to force it to full duplex, freeBSD still > >showing half-duplex during boot time. > > > >Can someone point out what I am missing here? > > > >Here is some information of my box. > > > >OS: FreeBSD 3.1 > >NIC: 3COM 3C905B-TX (setting is autodetect) > > > >pollo:/opt/openssl-0.9.3# ifconfig -a > >xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 > > ether 00:10:5a:1b:d8:3d > > media: 100baseTX <half-duplex> > > supported media: autoselect 100baseTX <full-duplex> 100baseTX > ><half-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP > ><half-duplex> 10baseT/UTP > >lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet 127.0.0.1 netmask 0xff000000 > >ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > >sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > >tun0: flags=8151<UP,POINTOPOINT,RUNNING,PROMISC,MULTICAST> mtu 1500 > > inet 209.90.137.234 --> 209.90.128.100 netmask 0xffffff00 > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?374B5B8E.FC4AF9D8>