Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 28 Mar 2000 17:26:45 +1000
From:      Robert Stuart <rstu@qbssss.edu.au>
To:        aic7xxx@freebsd.org
Subject:   enable_irq() unbalanced messages on boot
Message-ID:  <38E05EB5.6FF3CA44@bssssq.edu.au>

next in thread | raw e-mail | index | archive | help
Hi,

I'm wondering what the enable_irq() message lines below mean.  They are
generated on booting the machine from a newly built kernel 2.2.14.  I'm
using RH6.1

This machine BTW has problems booting from the SCSI drives with lilo. 
It starts loading initrd/vmlinuz (I can't remember which) indicated by
dots, and then stops and eventuall gives an error code indicating 0x80
("Disk timeout").

The machine is using two Adaptec 2940U2W cards.  I believe I have
termination right.

Thanks in advance.


(scsi0) <Adaptec AHA-294X Ultra2 SCSI host adapter> found at PCI 0/10/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
enable_irq() unbalanced from d0828b0e
(scsi1) <Adaptec AHA-294X Ultra2 SCSI host adapter> found at PCI 0/11/0
(scsi1) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 396 instructions downloaded
enable_irq() unbalanced from d0828b0e
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.28/3.2.4
       <Adaptec AHA-294X Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.28/3.2.4
       <Adaptec AHA-294X Ultra2 SCSI host adapter>
scsi : 2 hosts.
(scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 31.
  Vendor: QUANTUM   Model: XP39100W          Rev: LXY4
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi1:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 31.
  Vendor: QUANTUM   Model: XP39100W          Rev: LXY4
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sdb at scsi1, channel 0, id 0, lun 0
  Vendor: IMS       Model: CDD522/10         Rev: 1.06
  Type:   WORM                               ANSI SCSI revision: 01
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17781520 [8682 MB]
[8.7 GB]
 sda: sda1 sda2 < sda5 > sda3
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17781520 [8682 MB]
[8.7 GB]
 sdb: sdb1 < sdb5 sdb6 > sdb3


Robert Stuart
Qld Board of Senior Secondary School Studies
ph: 3864 0364


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38E05EB5.6FF3CA44>