Date: Wed, 14 Nov 2012 08:15:39 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org, Heikki Suonsivu <hsu@bbnetworks.net> Cc: FreeBSD-gnats-submit@freebsd.org Subject: Re: usb/173616: LG USB DVD-RW USB STALL Message-ID: <201211140815.39616.hselasky@c2i.net> In-Reply-To: <201211132152.qADLq6j9039168@lelu.suonsivu.net> References: <201211132152.qADLq6j9039168@lelu.suonsivu.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 13 November 2012 22:52:06 Heikki Suonsivu wrote: > >Number: 173616 > >Category: usb > >Synopsis: LG USB DVD-RW USB STALL > >Confidential: no > >Severity: serious > >Priority: medium > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Tue Nov 13 22:00:00 UTC 2012 > >Closed-Date: > >Last-Modified: > >Originator: Heikki Suonsivu > >Release: FreeBSD 9.1-PRERELEASE amd64 > > >Organization: > bbnetworks.net > > >Environment: > System: FreeBSD lelu.suonsivu.net 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #2: > Sat Nov 10 03:23:41 EET 2012 > root@lelu.suonsivu.net:/usr/obj/usr/src/sys/HSU9 amd64 > > dmesg: > > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.1-PRERELEASE #2: Sat Nov 10 03:23:41 EET 2012 > root@lelu.suonsivu.net:/usr/obj/usr/src/sys/HSU9 amd64 > CPU: AMD Phenom(tm) II X4 965 Processor (3411.49-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0x100f43 Family = 0x10 Model = 0x4 > Stepping = 3 > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M > CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x802009<SSE3,MON,CX16,POPCNT> > AMD > Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow! > > AMD > Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS > ,SKINIT,WDT,NodeId> TSC: P-state invariant > real memory = 4294967296 (4096 MB) > avail memory = 3832315904 (3654 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <070512 APIC1458> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > ioapic0 <Version 2.1> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ctl: CAM Target Layer loaded > acpi0: <070512 XSDT1458> on motherboard > acpi0: Power Button (fixed) > acpi0: reservation of fee00000, 1000 (3) failed > acpi0: reservation of ffb80000, 80000 (3) failed > acpi0: reservation of fec10000, 20 (3) failed > acpi0: reservation of fed80000, 1000 (3) failed > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, cfe00000 (3) failed > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 450 > Event timer "HPET1" frequency 14318180 Hz quality 450 > Event timer "HPET2" frequency 14318180 Hz quality 450 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem > 0xd0000000-0xdfffffff,0xfe6f0000-0xfe6fffff,0xfe500000-0xfe5fffff irq 18 > at device 5.0 on pci1 hdac0: <ATI (0x970f) HDA Controller> mem > 0xfe6e8000-0xfe6ebfff irq 19 at device 5.1 on pci1 pcib2: <ACPI PCI-PCI > bridge> irq 17 at device 9.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe7fe000-0xfe7fffff irq 17 > at device 0.0 on pci2 xhci0: 32 byte context size. > usbus0 on xhci0 > pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > atapci0: <JMicron JMB361 UDMA133 controller> port > 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem > 0xfe8ffc00-0xfe8ffdff irq 18 at device 0.0 on pci3 ahci0: <JMicron JMB361 > AHCI SATA controller> at channel -1 on atapci0 ahci0: AHCI v1.10 with 1 > 3Gbps ports, Port Multiplier supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ata2: <ATA channel> at channel 0 on atapci0 > ahci1: <ATI IXP700 AHCI SATA controller> port > 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem > 0xfe4ffc00-0xfe4fffff irq 19 at device 17.0 on pci0 ahci1: AHCI v1.20 with > 6 6Gbps ports, Port Multiplier supported > ahcich1: <AHCI channel> at channel 0 on ahci1 > ahcich2: <AHCI channel> at channel 1 on ahci1 > ahcich3: <AHCI channel> at channel 2 on ahci1 > ahcich4: <AHCI channel> at channel 3 on ahci1 > ahcich5: <AHCI channel> at channel 4 on ahci1 > ahcich6: <AHCI channel> at channel 5 on ahci1 > ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe4fe000-0xfe4fefff irq > 18 at device 18.0 on pci0 usbus1 on ohci0 > ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe4ff800-0xfe4ff8ff > irq 17 at device 18.2 on pci0 usbus2: EHCI version 1.0 > usbus2 on ehci0 > ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe4fd000-0xfe4fdfff irq > 18 at device 19.0 on pci0 usbus3 on ohci1 > ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe4ff400-0xfe4ff4ff > irq 17 at device 19.2 on pci0 usbus4: EHCI version 1.0 > usbus4 on ehci1 > pci0: <serial bus, SMBus> at device 20.0 (no driver attached) > hdac1: <ATI SB600 HDA Controller> mem 0xfe4f4000-0xfe4f7fff irq 16 at > device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 > isa0: <ISA bus> on isab0 > pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 > pci4: <ACPI PCI bus> on pcib4 > fwohci0: <VIA Fire II (VT6306)> port 0xdc00-0xdc7f mem > 0xfe9fb800-0xfe9fbfff irq 22 at device 7.0 on pci4 fwohci0: OHCI version > 1.10 (ROM=1) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:1e:8c:00:00:e4:87:16 > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:1e:8c:e4:87:16 > fwe0: Ethernet address: 02:1e:8c:e4:87:16 > fwip0: <IP over FireWire> on firewire0 > fwip0: Firewire address: 00:1e:8c:00:00:e4:87:16 @ 0xfffe00000000, S400, > maxrec 2048 dcons_crom0: <dcons configuration ROM> on firewire0 > dcons_crom0: bus_addr 0xc76d0000 > fwohci0: Initiate bus reset > fwohci0: fwohci_intr_core: BUS reset > fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER > mode ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem > 0xfe4fc000-0xfe4fcfff irq 18 at device 20.5 on pci0 usbus5 on ohci2 > pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port > 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 16 at > device 0.0 on pci5 re0: Using 1 MSI-X message > re0: Chip rev. 0x2c000000 > re0: MAC rev. 0x00000000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 > rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, > 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, > 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: > f4:6d:04:15:87:ff > ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe4f3000-0xfe4f3fff irq > 18 at device 22.0 on pci0 usbus6 on ohci3 > ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe4ff000-0xfe4ff0ff > irq 17 at device 22.2 on pci0 usbus7: EHCI version 1.0 > usbus7 on ehci2 > acpi_button0: <Power Button> on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > orm0: <ISA Option ROM> at iomem 0xd3000-0xd5fff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > ppc0: cannot reserve I/O port range > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > hwpstate0: <Cool`n'Quiet 2.0> on cpu0 > Timecounters tick every 1.000 msec > firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) > firewire0: bus manager 0 > IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled > ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based > forwarding enabled, default to accept, logging disabled DUMMYNET 0 with > IPv6 initialized (100409) > load_dn_sched dn_sched FIFO loaded > load_dn_sched dn_sched PRIO loaded > load_dn_sched dn_sched QFQ loaded > load_dn_sched dn_sched RR loaded > load_dn_sched dn_sched WF2Q+ loaded > hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0 > hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0 > pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0 > hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 > hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 > pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 > on hdaa1 pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 > pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 > pcm4: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 > usbus0: 5.0Gbps Super Speed USB v3.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 480Mbps High Speed USB v2.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 480Mbps High Speed USB v2.0 > usbus5: 12Mbps Full Speed USB v1.0 > usbus6: 12Mbps Full Speed USB v1.0 > usbus7: 480Mbps High Speed USB v2.0 > ugen0.1: <0x1033> at usbus0 > uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 > ugen1.1: <ATI> at usbus1 > uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <ATI> at usbus2 > uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > ugen3.1: <ATI> at usbus3 > uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > ugen4.1: <ATI> at usbus4 > uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 > ugen5.1: <ATI> at usbus5 > uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > ugen6.1: <ATI> at usbus6 > uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > ugen7.1: <ATI> at usbus7 > uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > uhub5: 2 ports with 2 removable, self powered > uhub6: 4 ports with 4 removable, self powered > uhub1: 5 ports with 5 removable, self powered > uhub3: 5 ports with 5 removable, self powered > uhub0: 4 ports with 4 removable, self powered > ada0 at ahcich1 bus 0 scbus2 target 0 lun 0 > ada0: <WDC WD30EZRS-00J99B0 80.00A80> ATA-8 SATA 2.x device > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad8 > ada1 at ahcich2 bus 0 scbus3 target 0 lun 0 > ada1: <ST32000542AS CC34> ATA-8 SATA 2.x device > ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) > ada1: Previously was known as ad10 > ada2 at ahcich3 bus 0 scbus4 target 0 lun 0 > ada2: <ST32000542AS CC34> ATA-8 SATA 2.x device > ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada2: Command Queueing enabled > ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) > ada2: Previously was known as ad12 > ada3 at ahcich4 bus 0 scbus5 target 0 lun 0 > ada3: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device > ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada3: Command Queueing enabled > ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) > ada3: Previously was known as ad14 > ada4 at ahcich6 bus 0 scbus7 target 0 lun 0 > ada4: <WDC WD30EZRX-00MMMB0 80.00A80> ATA-8 SATA 3.x device > ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > ada4: Command Queueing enabled > ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) > ada4: Previously was known as ad18 > SMP: AP CPU #2 Launched! > SMP: AP CPU #1 Launched! > cd0 at ata2 bus 0 scbus1 target 0 lun 0 > cd0: <HL-DT-ST DVDRAM GSA-4167B DL11> Removable CD-ROM SCSI-0 device > cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) > SMP: AP CPU #3 Launched! > cd0: Attempt to query device size failed: NOT READY, Medium not present > Timecounter "TSC-low" frequency 13326119 Hz quality 800 > uhub7: 4 ports with 4 removable, self powered > GEOM_MIRROR: Device mirror/leluroot launched (1/2). > GEOM_MIRROR: Device leluroot: rebuilding provider ada1p3. > GEOM_MIRROR: Device mirror/lelu-root launched (1/1). > GEOM_MIRROR: Device mirror/lelu-u launched (2/2). > GEOM_JOURNAL: Journal 3960267491: mirror/lelu-root contains data. > GEOM_JOURNAL: Journal 3960267491: mirror/lelu-root contains journal. > GEOM_JOURNAL: Journal mirror/lelu-root clean. > GEOM_JOURNAL: Journal 769953320: mirror/lelu-u contains data. > GEOM_JOURNAL: Journal 769953320: mirror/lelu-u contains journal. > GEOM_JOURNAL: Journal mirror/lelu-u clean. > Root mount waiting for: GJOURNAL GJOURNAL usbus4 usbus2 > uhub4: 5 ports with 5 removable, self powered > uhub2: 5 ports with 5 removable, self powered > ugen2.2: <vendor 0x1a40> at usbus2 > uhub8: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 2> on > usbus2 uhub8: MTT enabled > Root mount waiting for: usbus2 > uhub8: 4 ports with 4 removable, self powered > Root mount waiting for: usbus2 > ugen2.3: <vendor 0x2109> at usbus2 > uhub9: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.95, addr 3> on > usbus2 uhub9: 4 ports with 4 removable, self powered > Root mount waiting for: usbus2 > ugen2.4: <vendor 0x1a40> at usbus2 > uhub10: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 4> > on usbus2 uhub10: MTT enabled > Root mount waiting for: usbus2 > uhub10: 4 ports with 4 removable, self powered > ugen2.5: <vendor 0x050d> at usbus2 > uhub11: <vendor 0x050d USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 5> > on usbus2 uhub11: MTT enabled > Root mount waiting for: usbus2 > uhub11: 7 ports with 7 removable, self powered > Root mount waiting for: usbus2 > ugen2.6: <Logitech> at usbus2 > ums0: <Logitech USB Receiver, class 0/0, rev 1.10/9.10, addr 6> on usbus2 > ums0: 5 buttons and [XYZ] coordinates ID=0 > Root mount waiting for: usbus2 > ugen2.7: <Unicomp Inc> at usbus2 > ukbd0: <Keyboard Interface> on usbus2 > kbd2 at ukbd0 > usbd_set_config_index: could not read device status: USB_ERR_SHORT_XFER > Root mount waiting for: usbus2 > ugen2.8: <BUFFALO> at usbus2 > umass0: <MSC Bulk-Only Transfer> on usbus2 > umass0: 8070i (ATAPI) over Bulk-Only; quirks = 0x0100 > umass0:9:0:-1: Attached to scbus9 > Trying to mount root from ufs:/dev/mirror/leluroot [rw,async]... > cd1 at umass-sim0 bus 0 scbus9 target 0 lun 0 > cd1: <Optiarc DVD RW AD-7560S SB01> Removable CD-ROM SCSI-0 device > cd1: 40.000MB/s transfers > cd1: cd present [278530 x 2048 byte records] > usbd_set_config_index: could not read device status: USB_ERR_SHORT_XFER > ugen2.9: <BUFFALO> at usbus2 > umass1: <MSC Bulk-Only Transfer> on usbus2 > umass1: 8070i (ATAPI) over Bulk-Only; quirks = 0x0100 > umass1:10:1:-1: Attached to scbus10 > cd2 at umass-sim1 bus 1 scbus10 target 0 lun 0 > cd2: <Optiarc DVD RW AD-7590S 1.J0> Removable CD-ROM SCSI-0 device > cd2: 40.000MB/s transfers > cd2: Attempt to query device size failed: NOT READY, Medium not present - > tray closed re0: link state changed to UP > > >Description: > LG external USB DVD-RW fails. > > ugen2.3: <product 0x2502 vendor 0x0424> at usbus2, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE ugen2.9: <Super Multi Rewriter HLDS Inc.> at usbus2, > cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON > > Kernel says the following: > > ugen2.3: <vendor 0x0424> at usbus2 > uhub9: <vendor 0x0424 product 0x2502, class 9/0, rev 2.00/0.01, addr 3> on > usbus2 uhub9: 2 ports with 2 removable, self powered > ugen2.9: <HLDS Inc.> at usbus2 > umass1: <HLDS Inc. Super Multi Rewriter, class 0/0, rev 2.00/0.00, addr 9> > on usbus2 umass1: SCSI over Bulk-Only; quirks = 0x0100 > umass1:10:1:-1: Attached to scbus10 > cd2 at umass-sim1 bus 1 scbus10 target 0 lun 0 > cd2: <HL-DT-ST DVD-RAM GSA-E20N 1.03> Removable CD-ROM SCSI-0 device > cd2: 40.000MB/s transfers > cd2: Attempt to query device size failed: NOT READY, Medium not present > usb_alloc_device: set address 10 failed (USB_ERR_STALLED, ignored) > usbd_setup_device_desc: getting device descriptor at addr 10 failed, > USB_ERR_STALLED usbd_req_re_enumerate: addr=10, set address failed! > (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device > descriptor at addr 10 failed, USB_ERR_STALLED usbd_req_re_enumerate: > addr=10, set address failed! (USB_ERR_STALLED, ignored) > usbd_setup_device_desc: getting device descriptor at addr 10 failed, > USB_ERR_STALLED ugen2.10: <Unknown> at usbus2 (disconnected) > uhub_reattach_port: could not allocate new device > usb_alloc_device: set address 10 failed (USB_ERR_STALLED, ignored) > usbd_setup_device_desc: getting device descriptor at addr 10 failed, > USB_ERR_STALLED usbd_req_re_enumerate: addr=10, set address failed! > (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device > descriptor at addr 10 failed, USB_ERR_STALLED usbd_req_re_enumerate: > addr=10, set address failed! (USB_ERR_STALLED, ignored) > usbd_setup_device_desc: getting device descriptor at addr 10 failed, > USB_ERR_STALLED ugen2.10: <Unknown> at usbus2 (disconnected) > uhub_reattach_port: could not allocate new device > usb_alloc_device: set address 10 failed (USB_ERR_STALLED, ignored) > usbd_setup_device_desc: getting device descriptor at addr 10 failed, > USB_ERR_STALLED usbd_req_re_enumerate: addr=10, set address failed! > (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device > descriptor at addr 10 failed, USB_ERR_STALLED usbd_req_re_enumerate: > addr=10, set address failed! (USB_ERR_STALLED, ignored) > usbd_setup_device_desc: getting device descriptor at addr 10 failed, > USB_ERR_STALLED ugen2.10: <Unknown> at usbus2 (disconnected) > uhub_reattach_port: could not allocate new device > uhub_reattach_port: port 2 reset failed, error=USB_ERR_STALLED > uhub_reattach_port: device problem (USB_ERR_STALLED), disabling port 2 > ugen2.3: <vendor 0x0424> at usbus2 (disconnected) > uhub9: at uhub8, port 4, addr 3 (disconnected) > ugen2.9: <HLDS Inc.> at usbus2 (disconnected) > umass1: at uhub9, port 1, addr 9 (disconnected) > (cd2:umass-sim1:1:0:0): lost device, 1 refs > (cd2:(pass7:umass-sim1:1:umass-sim1:1:0:0:0): removing device entry > 0): passdevgonecb: devfs entry is gone > > When trying to access the drive, device not configured error results. > Hi, Can you try 9-stable? --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201211140815.39616.hselasky>