From owner-freebsd-questions Fri May 9 14:01:29 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA28722 for questions-outgoing; Fri, 9 May 1997 14:01:29 -0700 (PDT) Received: from yogurt.apg.more.net (spaul@yogurt.apg.more.net [198.209.250.150]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA28713 for ; Fri, 9 May 1997 14:01:23 -0700 (PDT) Received: (from spaul@localhost) by yogurt.apg.more.net (8.8.5/8.8.5) id QAA14175 for freebsd-questions@FreeBSD.ORG; Fri, 9 May 1997 16:01:21 -0500 (CDT) From: Paul Saab Message-Id: <199705092101.QAA14175@yogurt.apg.more.net> Subject: HP NetServer 5/100 LS2 To: freebsd-questions@FreeBSD.ORG Date: Fri, 9 May 1997 16:01:21 -0500 (CDT) X-Mailer: ELM [version 2.4ME+ PL31 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hello, I have a HP NetServer 5/100 LS2 which is running BSDi that I want to convert to FreeBSD. I read the FAQ about the netserver and did what it said and the boot disk still does not detect the SCSI controllers. Has anyone tried installing FreeBSD on a machine like this? Thanks. Below is the bootup messages from BSDi if that helps any. Paul Saab spaul@more.net --- BSDI BSD/OS 2.1 Kernel #0: Thu Mar 13 20:56:01 CST 1997 paul@spider.arach-net.com:/usr/src/sys/compile/GENERIC cpu = Pentium (about 100 MHz) model 2, stepping 5 delay multiplier 2548 real mem = 67108864 avail mem = 64434176 buffer cache = 6545408 isa0 (root) eisa0 at root pci0 at root: configuration mechanism 1 pccons0 at isa0 iobase 0x60 irq 1: color, 8 screens pcaux0 at isa0 iobase 0x60 irq 12 com0 at isa0 iobase 0x3f8 irq 4: buffered (16550AF) com1 at isa0 iobase 0x2f8 irq 3: buffered (16550AF) lp0 at isa0 iobase 0x378 irq 7 fdc0 at isa0 iobase 0x3f0 irq 6 drq 2: floppy controller fd0 at fdc0 slave 0: 1.44M HD 3.5 floppy npx0 at isa0 iobase 0xf0: math coprocessor vga0 at isa0 iobase 0x3c0 maddr 0xa0000-0xaffff: VGA graphics aic0 at pci0 irq 11 maddr 0xff9ff000-0xff9ff0ff aic0: initiator id 7, parity enabled aic0: delaying to permit certain devices to finish self-test tg0 at aic0 target 1 sd0 at tg0 unit 0: disk: HP 2.13 GB 1st ### rev 1221 (SCSI-2) 4165272*512 tg0: disconnect enabled, synchronous at 10.0MB/s, max offset 8 tg1 at aic0 target 5 sr0 at tg1 unit 0: CD-ROM: TOSHIBA CD-ROM XM-5301TA rev 1895 (SCSI-2) removable tg1: disconnect enabled, synchronous at 4.4MB/s, max offset 8 aic1 at pci0 irq 9 maddr 0xff9fe000-0xff9fe0ff aic1: initiator id 7, parity enabled aic1: delaying to permit certain devices to finish self-test ne0 at isa0 iobase 0x340 irq 5: NE-2000, address 00:40:05:14:89:19 pe0 at isa0/lp0: Pocket Ethernet-2 xir0 at isa0/lp0: Pocket Ethernet-3 changing root device to sd0a