Date: Tue, 16 Jul 2002 07:52:51 +0100 From: "Kjell - LA3SG" <kmidtset@c2i.net> To: freebsd-questions@FreeBSD.org Subject: WinTV card not recognized on AOpen AX-34pro card Message-ID: <3D33D0D3.28796.7EFCEE@localhost>
next in thread | raw e-mail | index | archive | help
I have set up camserv on a box with an Abit VH-6 motherboard, and it works just fine. This is a snippet from the VH-6 dmesg: ------------ bktr0: <BrookTree 878> mem 0xd8000000-0xd8000fff irq 5 at device 13.0 on pci0 bktr0: Hauppauge Model 44804 C448 bktr0: Warning - Unknown Hauppauge Tuner 0x30 bktr0: Hauppauge WinCast/TV, Philips PAL I tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 5 ------------- Installing the same TV card in the same PCI slot on a AOpen AX- 34 Pro box, the corresponding snippet is: -------------- bktr0: <BrookTree 878> mem 0xd9002000-0xd9002fff irq 12 at device 11.0 on pci0 bktr0: Hauppauge Model 44804 C448 bktr0: Warning - Unknown Hauppauge Tuner 0x30 bktr0: Hauppauge WinCast/TV, Philips NTSC tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 11.1 irq 12 -------------- camserv now produces a distorted picture. Using the VGA and Ethernet card from the Abit box makes no difference. Using the FXTV utility under KDE on the Abit box, it is possible to select modes. When selecting NTSC I get the same distorted picture as on the AOpen box, but selecting PAL/N or PAL/BGDHI produces good pictures. So why does the AOpen board insist that my TV card is a NTSC card? Tnx from Kjell ======dmesg for Abit (working)==================== Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #2: Mon Jul 1 21:16:52 CEST 2002 trine@trine.la3sg.net:/usr/src/sys/compile/BKTR Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (567.96-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > real memory = 100597760 (98240K bytes) avail memory = 93110272 (90928K bytes) Preloaded elf kernel "kernel" at 0xc049c000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fde20 apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400- 0xd41f irq 11 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800- 0xd81f irq 11 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered chip2: <VIA 82C686 AC97 Audio> port 0xe400- 0xe403,0xe000-0xe003,0xdc00-0xdcff irq 9 at device 7.5 on pci0 ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xec00-0xec1f irq 11 at device 9.0 on pci0 ed0: address 00:50:bf:27:c5:e7, type NE2000 (16 bit) bktr0: <BrookTree 878> mem 0xd8000000-0xd8000fff irq 5 at device 13.0 on pci0 bktr0: Hauppauge Model 44804 C448 bktr0: Warning - Unknown Hauppauge Tuner 0x30 bktr0: Hauppauge WinCast/TV, Philips PAL I tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 5 pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 fdc0: <NEC 72065B or clone> at port 0x3f0- 0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 39266MB <IBM-DTLA-305040> [79780/16/63] at ata0-master UDMA66 acd0: CD-RW <HP CD-Writer+ 7100> at ata1-master using PIO3 Mounting root from ufs:/dev/ad0s1a ==========dmesg from AOpen (not working)======== Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-RELEASE #0: Mon Jul 15 21:43:45 CEST 2002 sexy@sexy.la3sg.net:/usr/src/sys/compile/SEXY Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (902.05-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > real memory = 268369920 (262080K bytes) avail memory = 256258048 (250252K bytes) Preloaded elf kernel "kernel" at 0xc04c6000. VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc0440ea2 (1000022) VESA: NVidia Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 8 entries at 0xc00fdc10 apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xc000-0xc00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc400- 0xc41f irq 11 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800- 0xc81f irq 11 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4 chip1: <VIA 82C686 AC97 Audio> port 0xd400- 0xd403,0xd000-0xd003,0xcc00-0xccff irq 5 at device 7.5 on pci0 rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0xdc00-0xdcff mem 0xd9000000-0xd90000ff irq 11 at device 8.0 on pci0 rl0: Ethernet address: 00:04:e2:00:ca:12 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: <RealTek 8139 10/100BaseTX> port 0xe000- 0xe0ff mem 0xd9001000-0xd90010ff irq 11 at device 9.0 on pci0 rl1: Ethernet address: 00:e0:4c:59:51:bd miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bktr0: <BrookTree 878> mem 0xd9002000-0xd9002fff irq 12 at device 11.0 on pci0 bktr0: Hauppauge Model 44804 C448 bktr0: Warning - Unknown Hauppauge Tuner 0x30 bktr0: Hauppauge WinCast/TV, Philips NTSC tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 11.1 irq 12 orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0- 0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 DUMMYNET initialized (011031) IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to accept, logging limited to 10 packets/entry by default IP Filter: v3.4.27 initialized. Default = block all, Logging = enabled ad0: 29312MB <Maxtor 33073H3> [59556/16/63] at ata0-master UDMA100 ad2: DMA limited to UDMA33, non-ATA66 cable or device ad2: 38166MB <WDC WD400EB-00CPF0> [77545/16/63] at ata1-master UDMA33 acd0: CDROM <IDE/ATAPI CD-ROM 52XS> at ata1- slave PIO4 Mounting root from ufs:/dev/ad0s1a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D33D0D3.28796.7EFCEE>