Date: Thu, 30 May 2002 11:29:32 -0400 From: Allen Thomas <w3craft@attbi.com> To: Andrew Gallatin <gallatin@cs.duke.edu> Cc: freebsd-alpha@FreeBSD.org Subject: Re: XFree86 & Alpha Demi-Sable Message-ID: <3CF6455C.AE088A08@attbi.com> References: <3CF3E84A.834835F7@attbi.com> <15603.60089.703466.654500@grasshopper.cs.duke.edu> <3CF3FFCB.C0908ED6@attbi.com> <15604.55234.240322.827898@grasshopper.cs.duke.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Drew, The following information was pulled from three sources. The first (1) is a log file from XFree86-4, the second (2) a redirect of the error information from startx, the third (3) is from my root mailbox. I am as you requested cc'ing the alpha mailing list hence the repeat of information. I am working on an Alphaserver 2000 trying to get XFree86-4 setup. The machine has 3 pci slots with a Diamond Stealth 3D 2000, a Symbios SCSI controller, and a SMC 10\100 nic. The xf86config runs and generates a XF86Config file in the /etc/X11/ directory. When I run startx the screen goes black for a few seconds and then a reboot to the login. I have countless hours invested and being a newbie I have reached a knowledge barrier and need to ask for guidance and direction. Your help will not go unappreciated. Date\Time incorrect These are from early today. Thank You ***************************************************** (1) /var/log/XFree86.0.log NOTE: I think I have taken care of this error XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: FreeBSD 4.5-RELEASE alpha [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Sat May 28 19:30:21 2016 (==) Using config file: "/etc/X11/XF86Config" Data incomplete in file /etc/X11/XF86Config Device section "Generic VGA" must have a Driver line. (EE) Problem parsing the config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xfree86.org. ********************************************** ********************************************** (2) startx.log error redirection NOTE: this is where I need help most. I dont know where to go from here. XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: FreeBSD 4.5-RELEASE alpha [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Sun May 29 02:43:58 2016 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "gv" (**) | |-->Device "d2k" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI: (0:2:0) Intel 82375EB pci-eisa bridge rev 3 (--) PCI:*(0:6:0) S3 ViRGE rev 6, Mem @ 0x84000000/26, BIOS @ 0x81000000/16 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.1.9 (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o (II) Module s3virge: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.6.0 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) S3VIRGE: driver (version 1.6.0) for S3 ViRGE chipsets: virge, 86C325, virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, trio 3d/2x, 86C362, 86C368 (--) Assigning device section with no busID to primary device (--) Chipset virge found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (**) S3VIRGE(0): Depth 8, (--) framebuffer bpp 8 (==) S3VIRGE(0): Default visual is PseudoColor (==) S3VIRGE(0): Using HW Cursor (==) S3VIRGE(0): Using fb. (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) S3VIRGE(0): initializing int10 (II) Machine needs sparse mapping (II) S3VIRGE(0): No legacy BIOS found -- trying PCI *********************************************** *********************************************** *********************************************** (3) Mailbox Information I did install a couple of packages (Apache) ************* >From root Sat May 28 03:04:28 2016 Return-Path: <root> Received: (from root@localhost) by webcraft.thomas.com (8.11.6/8.11.6) id u4S74Si32500 for root; Sat, 28 May 2016 03:04:28 -0400 (EDT) (envelope-from root) Date: Sat, 28 May 2016 03:04:28 -0400 (EDT) From: Charlie Root <root> Message-Id: <201605280704.u4S74Si32500@webcraft.thomas.com> To: root Subject: webcraft.thomas.com daily run output Status: RO Removing stale files from /var/preserve: Cleaning out old system announcements: Removing stale files from /var/rwho: Backup passwd and group files: no /var/backups/master.passwd.bak no /var/backups/group.bak Verifying group file syntax: Backing up mail aliases: no /var/backups/aliases.bak Disk status: Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da1a 128990 44388 74284 37% / /dev/da1g 1123798 2 1033894 0% /sfuff /dev/da1f 257998 748 236612 0% /tmp /dev/da2e 2022918 1194008 667078 64% /usr /dev/da1e 257998 312 237048 0% /var procfs 8 8 0 100% /proc Last dump(s) done (Dump '>' file systems): UUCP status: Network interface status: Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll rl0 1500 <Link#1> 00:e0:29:42:53:8d 32799 0 16661 0 0 rl0 1500 192.168.1 webcraft 32785 - 16653 - - rl0 1500 fe80:1::2e0 fe80:1::2e0:29ff: 0 - 0 - - lo0 16384 <Link#2> 0 0 0 0 0 lo0 16384 localhost.t ::1 0 - 0 - - lo0 16384 fe80:2::1 fe80:2::1 0 - 0 - - lo0 16384 your-net localhost 0 - 0 - - ppp0* 1500 <Link#3> 0 0 0 0 0 sl0* 552 <Link#4> 0 0 0 0 0 faith 1500 <Link#5> 0 0 0 0 0 Local system status: 3:01AM up 2:34, 1 user, load averages: 1.34, 1.12, 0.99 Mail in local queue: /var/spool/mqueue is empty Security check: (output mailed separately) Checking for rejected mail hosts: Checking for denied zone transfers (AXFR and IXFR): ************** >From root Sat May 28 03:04:28 2016 Return-Path: <root> Received: (from root@localhost) by webcraft.thomas.com (8.11.6/8.11.6) id u4S74Sj32448 for root; Sat, 28 May 2016 03:04:28 -0400 (EDT) (envelope-from root) Date: Sat, 28 May 2016 03:04:28 -0400 (EDT) From: Charlie Root <root> Message-Id: <201605280704.u4S74Sj32448@webcraft.thomas.com> To: root Subject: webcraft.thomas.com security check output Status: RO Checking setuid files and devices: No /var/log/setuid.today No /var/log/mount.today Checking for uids of 0: root 0 toor 0 Checking for passwordless accounts: No /var/log/dmesg.today webcraft.thomas.com login failures: webcraft.thomas.com refused connections: >From root Sat May 28 04:21:55 2016 Return-Path: <root> Received: (from root@localhost) by webcraft.thomas.com (8.11.6/8.11.6) id u4S8Lsu44854 for root; Sat, 28 May 2016 04:21:54 -0400 (EDT) (envelope-from root) Date: Sat, 28 May 2016 04:21:54 -0400 (EDT) From: Charlie Root <root> Message-Id: <201605280821.u4S8Lsu44854@webcraft.thomas.com> To: root Subject: webcraft.thomas.com weekly run output Status: RO Cleaning up kernel database files: Rebuilding locate database: Rebuilding whatis database: >From root Sun May 29 03:03:55 2016 Return-Path: <root> Received: (from root@localhost) by webcraft.thomas.com (8.11.6/8.11.6) id u4T73tq00336 for root; Sun, 29 May 2016 03:03:55 -0400 (EDT) (envelope-from root) Date: Sun, 29 May 2016 03:03:55 -0400 (EDT) From: Charlie Root <root> Message-Id: <201605290703.u4T73tq00336@webcraft.thomas.com> To: root Subject: webcraft.thomas.com security check output Status: RO Checking setuid files and devices: webcraft.thomas.com setuid diffs: 9,10c9 < 89477 -rwsr-xr-x 1 root wheel 19872 Jan 27 10:38:37 2002 /usr/X11R6/bin/dga < 89510 -rwsr-xr-x 1 root wheel 254976 Jan 27 10:38:48 2002 /usr/X11R6/bin/xterm --- > 89426 -rws--x--x 1 root wheel 331728 May 28 08:10:09 2016 /usr/X11R6/bin/xterm Checking for uids of 0: root 0 toor 0 Checking for passwordless accounts: webcraft.thomas.com kernel log messages: > 15173 512 byte sectors: 255H 63S/T 530C) > Mounting root from ufs:/dev/da1a > WARNING: / was not properly dismounted > swapon: adding /dev/da1b as swap device > Automatic boot in progress... > /dev/da1a: > 1566 files, 23203 used, 41292 free > (156 frags, 5142 blocks, 0.2% fragmentation) > /dev/da1g: > 1 files, 1 used, 561898 free > (18 frags, 70235 blocks, 0.0% fragmentation) > /dev/da1f: > SUMMARY INFORMATION BAD > (SALVAGED) > /dev/da1f: > BLK(S) MISSING IN BIT MAPS > (SALVAGED) > /dev/da1f: > 5 files, 4 used, 128995 free > (19 frags, 16122 blocks, 0.0% fragmentation) > /dev/da1e: > 118 files, 901 used, 128098 free > (10 frags, 16011 blocks, 0.0% fragmentation) > /dev/da2e: > 105924 files, 454768 used, 556691 free > (27467 frags, 66153 blocks, 2.7% fragmentation) > Doing initial network setup: > hostname > . > rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 > inet6 fe80::2e0:29ff:fe42:538d%rl0 prefixlen 64 tentative scopeid 0x1 > ether 00:e0:29:42:53:8d > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 > inet 127.0.0.1 netmask 0xff000000 > add net default: gateway 192.168.1.1 > Additional routing options: > TCP keepalive=YES > . > Routing daemons: > . > Doing IPv6 network setup: > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > net.inet6.ip6.forwarding: > 0 > -> > 0 > > net.inet6.ip6.accept_rtadv: > 0 > -> > 0 > > net.inet6.ip6.accept_rtadv: > 0 > -> > 1 > > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > IPv4 mapped IPv6 address support=YES > . > Additional daemons: > syslogd > . > Doing additional network setup: > . > Starting final network daemons: > . > ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib > Starting standard daemons: > inetd > cron > sshd > sendmail > . > Initial rc.alpha initialization: > . > Configuring syscons: > blanktime > screensaver > logo_saver: no suitable graphics mode > module_register_init: MOD_LOAD (logo_saver, fffffe0000891140, 0) error 19 > moused > May 29 00:20:51 webcraft /kernel: logo_saver: no suitable graphics mode > . > Additional ABI support: > . > Local package initialization: > . > Additional TCP options: > . > > Sun May 29 00:20:51 EDT 2016 > May 29 00:21:01 webcraft login: ROOT LOGIN (root) ON ttyv0 > May 29 01:16:59 webcraft reboot: rebooted by root > May 29 01:17:00 webcraft syslogd: exiting on signal 15 > Waiting (max 60 seconds) for system process `vnlru' to stop...stopped > Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped > Waiting (max 60 seconds) for system process `syncer' to stop...stopped > > syncing disks... 4 > done > Uptime: 59m25s > Rebooting... > FreeBSD 4.5-RELEASE #0: Tue Jan 29 07:52:50 GMT 2002 > murray@axpbuilder.freebsdmall.com:/usr/src/sys/compile/GENERIC > avail memory = 122077184 (119216K bytes) > Preloaded elf kernel "kernel" at 0xfffffc00007bc000. > pci0: <unknown card> (vendor=0x0001, dev=0x0202) at 12.0 irq 0 > pci0: <unknown card> (vendor=0x0001, dev=0x0202) at 13.0 irq 0 > plip0: cannot reserve interrupt, failed. > Timecounter "alpha" frequency 233369970 Hz > cd0: cd present [326224 x 2048 byte records] > clean, 41292 free > (156 frags, 5142 blocks, 0.2% fragmentation) > clean, 549980 free > (27628 frags, 65294 blocks, 2.7% fragmentation) > clean, 128994 free > (18 frags, 16122 blocks, 0.0% fragmentation) > clean, 128018 free > (34 frags, 15998 blocks, 0.0% fragmentation) > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > 0 > > net.inet6.ip6.accept_rtadv: > 0 > -> > ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib > sshd > screensaver > logo_saver: no suitable graphics mode > module_register_init: MOD_LOAD (logo_saver, fffffe0000893140, 0) error 19 > moused > May 29 01:18:29 webcraft /kernel: logo_saver: no suitable graphics mode > apache > Sun May 29 01:18:31 EDT 2016 > May 29 01:18:41 webcraft login: ROOT LOGIN (root) ON ttyv0 > unexpected machine check: > > mces = 0x1 > vector = 0x670 > param = 0xfffffc0000006000 > pc = 0x16037e600 > ra = 0x12006caf0 > curproc = 0xfffffe00059d04c0 > pid = 153, comm = XFree86 > > panic: machine check > > syncing disks... > unexpected machine check: > > mces = 0x1 > vector = 0x660 > param = 0xfffffc0000006000 > pc = 0xfffffc00003d6628 > ra = 0xfffffc000058f77c > curproc = 0xfffffe00059d04c0 > pid = 153, comm = XFree86 > > panic: machine check > Uptime: 1m6s > Automatic reboot in 15 seconds - press a key on the console to abort > Rebooting... > avail memory = 122077184 (119216K bytes) > Preloaded elf kernel "kernel" at 0xfffffc00007bc000. > md0: Malloc disk > pci0: <unknown card> (vendor=0x0001, dev=0x0202) at 12.0 irq 1 > pci0: <unknown card> (vendor=0x0001, dev=0x0202) at 13.0 irq 1 > Timecounter "alpha" frequency 233370005 Hz > Mounting root from ufs:/dev/da1a > WARNING: / was not properly dismounted > swapon: adding /dev/da1b as swap device > Automatic boot in progress... > /dev/da1a: > 1566 files, 23203 used, 41292 free > (156 frags, 5142 blocks, 0.2% fragmentation) > /dev/da1g: > 1 files, 1 used, 561898 free > (18 frags, 70235 blocks, 0.0% fragmentation) > /dev/da1f: > INCORRECT BLOCK COUNT I=4 (4 should be 0) > (CORRECTED) > /dev/da1f: > UNREF FILE > I=4 OWNER=root MODE=100444 > /dev/da1f: SIZE=0 MTIME=May 29 01:18 2016 (CLEARED) > /dev/da1f: > FREE BLK COUNT(S) WRONG IN SUPERBLK > (SALVAGED) > /dev/da1f: > SUMMARY INFORMATION BAD > (SALVAGED) > /dev/da1f: > BLK(S) MISSING IN BIT MAPS > (SALVAGED) > /dev/da1f: > 6 files, 5 used, 128994 free > (18 frags, 16122 blocks, 0.0% fragmentation) > /dev/da1e: > UNREF FILE > I=16262 OWNER=root MODE=100644 > /dev/da1e: SIZE=16475 MTIME=May 29 00:20 2016 (CLEARED) > /dev/da1e: > UNREF FILE > I=16279 OWNER=root MODE=100644 > /dev/da1e: SIZE=132 MTIME=May 29 01:17 2016 (CLEARED) > /dev/da1e: > UNREF FILE > I=16281 OWNER=root MODE=100644 > /dev/da1e: SIZE=3 MTIME=May 29 00:20 2016 (CLEARED) > /dev/da1e: > UNREF FILE > I=16282 OWNER=root MODE=100644 > /dev/da1e: SIZE=65536 MTIME=May 29 00:20 2016 (CLEARED) > /dev/da1e: > UNREF FILE > I=16283 OWNER=root MODE=100444 > /dev/da1e: SIZE=183 MTIME=May 29 00:20 2016 (CLEARED) > /dev/da1e: > UNREF FILE > I=16284 OWNER=root MODE=100644 > /dev/da1e: SIZE=3 MTIME=May 29 00:20 2016 (CLEARED) > /dev/da1e: > UNREF FILE > I=16285 OWNER=root MODE=100644 > /dev/da1e: SIZE=3 MTIME=May 29 00:20 2016 (CLEARED) > /dev/da1e: > UNREF FILE > I=16287 OWNER=root MODE=100644 > /dev/da1e: SIZE=32 MTIME=May 29 00:20 2016 (CLEARED) > /dev/da1e: > UNREF FILE > I=16288 OWNER=root MODE=100644 > /dev/da1e: SIZE=4 MTIME=May 29 00:20 2016 (CLEARED) > /dev/da1e: > FREE BLK COUNT(S) WRONG IN SUPERBLK > (SALVAGED) > /dev/da1e: > SUMMARY INFORMATION BAD > (SALVAGED) > /dev/da1e: > BLK(S) MISSING IN BIT MAPS > (SALVAGED) > /dev/da1e: > 139 files, 936 used, 128063 free > (23 frags, 16005 blocks, 0.0% fragmentation) > /dev/da2e: > 106715 files, 461479 used, 549980 free > (27628 frags, 65294 blocks, 2.7% fragmentation) > Doing initial network setup: > hostname > . > rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 > inet6 fe80::2e0:29ff:fe42:538d%rl0 prefixlen 64 tentative scopeid 0x1 > ether 00:e0:29:42:53:8d > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 > inet 127.0.0.1 netmask 0xff000000 > add net default: gateway 192.168.1.1 > Additional routing options: > TCP keepalive=YES > . > Routing daemons: > . > Doing IPv6 network setup: > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > net.inet6.ip6.forwarding: > 0 > -> > 0 > net.inet6.ip6.accept_rtadv: > 0 > -> > 0 > > net.inet6.ip6.accept_rtadv: > 0 > -> > 1 > > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > IPv4 mapped IPv6 address support=YES > . > Additional daemons: > syslogd > . > Doing additional network setup: > . > Starting final network daemons: > . > ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib > Starting standard daemons: > inetd > cron > sshd > sendmail > . > Initial rc.alpha initialization: > . > Configuring syscons: > blanktime > screensaver > logo_saver: no suitable graphics mode > module_register_init: MOD_LOAD (logo_saver, fffffe000088f140, 0) error 19 > moused > May 29 01:23:05 webcraft /kernel: logo_saver: no suitable graphics mode > . > Additional ABI support: > . > Local package initialization: > apache > . > Additional TCP options: > . > > Sun May 29 01:23:12 EDT 2016 > May 29 01:32:53 webcraft login: ROOT LOGIN (root) ON ttyv0 > > unexpected machine check: > > mces = 0x1 > vector = 0x670 > param = 0xfffffc0000006000 > pc = 0x16037e600 > ra = 0x12006caf0 > curproc = 0xfffffe00059d0a40 > pid = 203, comm = XFree86 > > panic: machine check > > syncing disks... > unexpected machine check: > > mces = 0x1 > vector = 0x660 > param = 0xfffffc0000006000 > pc = 0xfffffc00003d6628 > ra = 0xfffffc000058f77c > curproc = 0xfffffe00059d0a40 > pid = 203, comm = XFree86 > > panic: machine check > Uptime: 37m41s > Automatic reboot in 15 seconds - press a key on the console to abort > Rebooting... > sio0: configured irq 4 not in bitmap of probed irqs 0 > Timecounter "alpha" frequency 233369950 Hz > Waiting 15 seconds for SCSI devices to settle > cd0 at sym0 bus 0 target 0 lun 0 > cd0: <TOSHIBA CD-ROM XM-6401TA 1001> Removable CD-ROM SCSI-2 device > cd0: 10.000MB/s transfers (10.000MHz, offset 8) > cd0: cd present [326224 x 2048 byte records] > da2 at sym1 bus 0 target 0 lun 0 > da2: <COMPAQ ST32550W 6416> Fixed Direct Access SCSI-2 device > da2: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled > da2: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C) > da1 at sym0 bus 0 target 2 lun 0 > da1: <COMPAQ ST32550W 6415> Fixed Direct Access SCSI-2 device > da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled > da1: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C) > da3 at sym1 bus 0 target 1 lun 0 > da3: <COMPAQ ST32171W 0388> Fixed Direct Access SCSI-2 device > da3: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled > da3: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C) > da0 at sym0 bus 0 target 1 lun 0 > da0: <WDIGTL ENTERPRISE 1.91> Fixed Direct Access SCSI-2 device > da0: 10.000MB/s transfers (10.000MHz, offset 8) > da0: 4157MB (8515173 512 byte sectors: 255H 63S/T 530C) > Mounting root from ufs:/dev/da1a > WARNING: / was not properly dismounted > swapon: adding /dev/da1b as swap device > Automatic boot in progress... > /dev/da1a: > 1567 files, 23205 used, 41290 free > (162 frags, 5141 blocks, 0.3% fragmentation) > /dev/da1g: > 1 files, 1 used, 561898 free > (18 frags, 70235 blocks, 0.0% fragmentation) > /dev/da1f: > SUMMARY INFORMATION BAD > (SALVAGED) > /dev/da1f: > BLK(S) MISSING IN BIT MAPS > (SALVAGED) > /dev/da1f: > 5 files, 5 used, 128994 free > (18 frags, 16122 blocks, 0.0% fragmentation) > /dev/da1e: > 151 files, 993 used, 128006 free > (22 frags, 15998 blocks, 0.0% fragmentation) > /dev/da2e: > 106715 files, 461479 used, 549980 free > (27628 frags, 65294 blocks, 2.7% fragmentation) > Doing initial network setup: > hostname > . > rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 > inet6 fe80::2e0:29ff:fe42:538d%rl0 prefixlen 64 tentative scopeid 0x1 > ether 00:e0:29:42:53:8d > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 > inet 127.0.0.1 netmask 0xff000000 > add net default: gateway 192.168.1.1 > Additional routing options: > TCP keepalive=YES > . > Routing daemons: > . > Doing IPv6 network setup: > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > net.inet6.ip6.forwarding: > 0 > -> > 0 > > net.inet6.ip6.accept_rtadv: > 0 > -> > 0 > > net.inet6.ip6.accept_rtadv: > 0 > -> > 1 > > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > IPv4 mapped IPv6 address support=YES > . > Additional daemons: > syslogd > . > Doing additional network setup: > . > Starting final network daemons: > . > ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib > Starting standard daemons: > inetd > cron > sshd > sendmail > . > Initial rc.alpha initialization: > . > Configuring syscons: > blanktime > screensaver > logo_saver: no suitable graphics mode > module_register_init: MOD_LOAD (logo_saver, fffffe0000891140, 0) error 19 > moused > May 29 02:01:48 webcraft /kernel: logo_saver: no suitable graphics mode > . > Additional ABI support: > . > Local package initialization: > apache > . > Additional TCP options: > . > > Sun May 29 02:01:51 EDT 2016 > May 29 02:10:43 webcraft login: ROOT LOGIN (root) ON ttyv0 > > unexpected machine check: > > mces = 0x1 > vector = 0x670 > param = 0xfffffc0000006000 > pc = 0x16037e600 > ra = 0x12006caf0 > curproc = 0xfffffe00059d0a40 > pid = 189, comm = XFree86 > > panic: machine check > > syncing disks... > unexpected machine check: > > mces = 0x1 > vector = 0x660 > param = 0xfffffc0000006000 > pc = 0xfffffc00003d6628 > ra = 0xfffffc000058f77c > curproc = 0xfffffe00059d0a40 > pid = 189, comm = XFree86 > > panic: machine check > Uptime: 45m25s > Automatic reboot in 15 seconds - press a key on the console to abort > Rebooting... > Unrecognized boot flag '0'. > Copyright (c) 1992-2002 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.5-RELEASE #0: Tue Jan 29 07:52:50 GMT 2002 > murray@axpbuilder.freebsdmall.com:/usr/src/sys/compile/GENERIC > DEC AlphaServer 2100 > AlphaServer 2000 4/233, 233MHz > 8192 byte page size, 1 processor. > CPU: EV45 (21064A) major=6 minor=2 > OSF PAL rev: 0x4000c0002012d > real memory = 132046848 (128952K bytes) > avail memory = 122077184 (119216K bytes) > Preloaded elf kernel "kernel" at 0xfffffc00007bc000. > md0: Malloc disk > t20: using interrupt type 0 on pci bus 0 > pci0: <PCI bus> on pcib0 > sym0: <810> port 0x10000-0x100ff mem 0x81010000-0x810100ff irq 1 at device 1.0 on pci0 > sym0: No NVRAM, ID 7, Fast-10, SE, parity checking > isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <S3 ViRGE graphics accelerator> at 6.0 irq 0 > sym1: <810> port 0x10100-0x101ff mem 0x81010100-0x810101ff irq 4 at device 7.0 on pci0 > sym1: No NVRAM, ID 7, Fast-10, SE, parity checking > rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x10200-0x102ff mem 0x81010200-0x810102ff irq 5 at device 8.0 on pci0 > rl0: Ethernet address: 00:e0:29:42:53:8d > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci0: <unknown card> (vendor=0x0001, dev=0x0202) at 12.0 irq 0 > pci0: <unknown card> (vendor=0x0400, dev=0x0400) at 12.4 > pci0: <unknown card> (vendor=0x0001, dev=0x0202) at 13.0 irq 0 > pci0: <unknown card> (vendor=0x0400, dev=0x0400) at 13.4 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> on isa0 > sc0: VGA <16 virtual consoles, flags=0x200> > mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0 at port 0x3f8-0x3ff irq 4 on isa0 > sio0: type 16550A > sio1: reserved for low-level i/o > ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > plip0: cannot reserve interrupt, failed. > lpt0: <Printer> on ppbus0 > lpt0: Polled port > ppi0: <Parallel I/O> on ppbus0 > Timecounter "alpha" frequency 233369940 Hz > WARNING: / was not properly dismounted > 1567 files, 23205 used, 41290 free > (162 frags, 5141 blocks, 0.3% fragmentation) > 1 files, 1 used, 561898 free > SUMMARY INFORMATION BAD > (SALVAGED) > BLK(S) MISSING IN BIT MAPS > (SALVAGED) > /dev/da1f: > 6 files, 6 used, 128993 free > (17 frags, 16122 blocks, 0.0% fragmentation) > 151 files, 996 used, 128003 free > (27 frags, 15997 blocks, 0.0% fragmentation) > /dev/da2e: > 106715 files, 461479 used, 549980 free > (27628 frags, 65294 blocks, 2.7% fragmentation) > module_register_init: MOD_LOAD (logo_saver, fffffe0000891140, 0) error 19 > May 29 02:48:14 webcraft /kernel: logo_saver: no suitable graphics mode > apache > Sun May 29 02:48:16 EDT 2016 > May 29 02:49:17 webcraft login: ROOT LOGIN (root) ON ttyv0 webcraft.thomas.com login failures: webcraft.thomas.com refused connections: >From root Sun May 29 03:04:02 2016 Return-Path: <root> Received: (from root@localhost) by webcraft.thomas.com (8.11.6/8.11.6) id u4T741b00380 for root; Sun, 29 May 2016 03:04:01 -0400 (EDT) (envelope-from root) Date: Sun, 29 May 2016 03:04:01 -0400 (EDT) From: Charlie Root <root> Message-Id: <201605290704.u4T741b00380@webcraft.thomas.com> To: root Subject: webcraft.thomas.com daily run output Status: RO Removing stale files from /var/preserve: Cleaning out old system announcements: Removing stale files from /var/rwho: Backup passwd and group files: webcraft.thomas.com passwd diffs: 20a21 > www:(password):80:80::0:0:World Wide Web Owner:/nonexistent:/sbin/nologin webcraft.thomas.com group diffs: 25a26 > www:*:80: Verifying group file syntax: Backing up mail aliases: Disk status: Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da1a 128990 46410 72262 39% / /dev/da1g 1123798 2 1033894 0% /sfuff /dev/da1f 257998 14 237346 0% /tmp /dev/da2e 2022918 922958 938128 50% /usr /dev/da1e 257998 2008 235352 1% /var procfs 8 8 0 100% /proc Last dump(s) done (Dump '>' file systems): UUCP status: Network interface status: Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll rl0 1500 <Link#1> 00:e0:29:42:53:8d 31 0 9 0 0 rl0 1500 192.168.1 webcraft 23 - 2 - - rl0 1500 fe80:1::2e0 fe80:1::2e0:29ff: 0 - 0 - - lo0 16384 <Link#2> 0 0 0 0 0 lo0 16384 localhost.t ::1 0 - 0 - - lo0 16384 fe80:2::1 fe80:2::1 0 - 0 - - lo0 16384 your-net localhost 0 - 0 - - ppp0* 1500 <Link#3> 0 0 0 0 0 sl0* 552 <Link#4> 0 0 0 0 0 faith 1500 <Link#5> 0 0 0 0 0 Local system status: 3:01AM up 16 mins, 1 user, load averages: 0.00, 0.01, 0.01 Mail in local queue: /var/spool/mqueue is empty Security check: (output mailed separately) Checking for rejected mail hosts: Checking for denied zone transfers (AXFR and IXFR): **************************************************** **************************************************** Thank You So Much, I am new to FreeBSD and happy to be here. I am very sorry this message is so long, I was fearful of an edit which may remove important clues. FYI even though I have an enormous amount of time trying to get this thing going I am still enjoying myself and learning. Al Thomas w3craft@attbi.com ****************************************************** A copy of my first email to the alpha-bsd list for reference: Hi -- I have been as yet unsuccessful with installation and operation of any version of XFree86. Each time I type startx I get a crash and reboot. Current Config: Demi-Sable Alphaserver 2000 with SRM Console version 5.3-2, 128mb ram. Installation of NT4 sp6a on a separate drive which functions properly. Installed FreeBSD 4.5 alpha which runs fine. I upgraded to XFree86-4. PCI Diamond Stealth 2000 2mb Video. PCI SMC 10\100 nic. PCI Symbios SCSI controller card. Gateway Vivitron svga monitor 75hz at 1024 and max 120 vert. I have 2 2gig SCSI hard drives for FreeBSD with /usr on one and everything else on the other No ISA cards. Attempted solutions: I replaced the ISA Qvision card with a PCI Diamond stealth 2000 and replaced the DEC nic with a SMC. Both because I thought I may be having compatability problems. I upgraded to XFree86-4. I have run XFree86 config from sysinstall which does create a config file. I have edited the config to reflect the default color depth. XFree86 -configure crashes the computer as well I tried to install KDE3\QT but have had errors each time with the install All this with several software reloads along the way. I would love to hear from someone with alpha experience. Your help would truly be appreciated. Thank You, Al Thomas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CF6455C.AE088A08>